【傅里叶梅林图像配准】用于图像配准的傅里叶梅林相位相关性的实现(Matlab代码实现)

本文主要是介绍【傅里叶梅林图像配准】用于图像配准的傅里叶梅林相位相关性的实现(Matlab代码实现),希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

💥💥💞💞欢迎来到本博客❤️❤️💥💥

🏆博主优势:🌞🌞🌞博客内容尽量做到思维缜密,逻辑清晰,为了方便读者。

⛳️座右铭:行百里者,半于九十。

📋📋📋本文目录如下:🎁🎁🎁

目录

💥1 概述

📚2 运行结果

🎉3 参考文献

🌈4 Matlab代码实现


💥1 概述

傅里叶梅林图像配准是一种基于傅里叶变换和梅林相位相关性的图像配准方法。它可以应用于图像旋转、缩放和平移等简单的几何变换操作。

在图像配准中,傅里叶变换被广泛应用,它将图像从空域转换到频域,使得图像的特征在频域中更加明显。而梅林相位相关性则是一种基于图像的相位信息进行匹配的方法,通过计算图像之间的相位差异来评估它们的相似度。

在傅里叶梅林图像配准中,首先对待配准图像进行傅里叶变换,得到其频谱图。然后,对参考图像进行相同的处理。接着,通过计算两个频谱图的梅林相位相关性,可以得到它们之间的相位差异。根据相位差异的大小,可以确定待配准图像需要进行的旋转、缩放和平移操作。

例如,当待配准图像需要进行旋转时,可以通过调整其频谱图的相位来实现。通过计算待配准图像和参考图像的梅林相位相关性,可以得到最佳的旋转角度。类似地,当待配准图像需要进行缩放或平移时,也可以通过相同的方法来实现。

除了简单的图像旋转、缩放和平移,傅里叶梅林图像配准还可以应用于更复杂的图像变换,例如图像的仿射变换和透视变换。通过对待配准图像进行傅里叶变换和梅林相位相关性计算,可以得到最佳的变换参数,从而实现图像的准确配准。

总而言之,傅里叶梅林图像配准是一种基于傅里叶变换和梅林相位相关性的图像配准方法,可以应用于简单的图像旋转、缩放和平移等几何变换操作。它通过计算图像的相位差异来评估它们的相似度,并通过调整图像的频谱图来实现准确的配准。除了简单的变换,它还可以应用于更复杂的图像变换,为图像处理和计算机视觉领域提供了一种有效的配准方法。

📚2 运行结果

【傅里叶梅林图像配准】用于图像配准的傅里叶梅林相位相关性的实现(Matlab代码实现) - 知乎

部分代码:

% The procedure is as follows (note this does not compute scale)% (1)   Read in I1 - the image to register against% (2)   Read in I2 - the image to register% (3)   Take the FFT of I1, shifting it to center on zero frequency% (4)   Take the FFT of I2, shifting it to center on zero frequency% (5)   Convolve the magnitude of (3) with a high pass filter% (6)   Convolve the magnitude of (4) with a high pass filter% (7)   Transform (5) into log polar space% (8)   Transform (6) into log polar space% (9)   Take the FFT of (7)% (10)  Take the FFT of (8)% (11)  Compute phase correlation of (9) and (10)% (12)  Find the location (x,y) in (11) of the peak of the phase correlation% (13)  Compute angle (360 / Image Y Size) * y from (12)% (14)  Rotate the image from (2) by - angle from (13)% (15)  Rotate the image from (2) by - angle + 180 from (13)% (16)  Take the FFT of (14)% (17)  Take the FFT of (15)% (18)  Compute phase correlation of (3) and (16)% (19)  Compute phase correlation of (3) and (17)% (20)  Find the location (x,y) in (18) of the peak of the phase correlation% (21)  Find the location (x,y) in (19) of the peak of the phase correlation% (22)  If phase peak in (20) > phase peak in (21), (y,x) from (20) is the translation% (23a) Else (y,x) from (21) is the translation and also:% (23b) If the angle from (13) < 180, add 180 to it, else subtract 180 from it.% (24)  Tada!% Requires (ouch):% 6 x FFT% 4 x FFT Shift% 3 x IFFT% 2 x Log Polar% 3 x Phase Correlations% 2 x High Pass Filter% 2 x Image Rotation% ---------------------------------------------------------------------% Load first image (I1)I1 = imread('lena.bmp');% Load second image (I2)I2 = imread('lena_cropped_rotated_shifted.bmp');% ---------------------------------------------------------------------% Convert both to FFT, centering on zero frequency component

% The procedure is as follows (note this does not compute scale)

    % (1)   Read in I1 - the image to register against
    % (2)   Read in I2 - the image to register
    % (3)   Take the FFT of I1, shifting it to center on zero frequency
    % (4)   Take the FFT of I2, shifting it to center on zero frequency
    % (5)   Convolve the magnitude of (3) with a high pass filter
    % (6)   Convolve the magnitude of (4) with a high pass filter
    % (7)   Transform (5) into log polar space
    % (8)   Transform (6) into log polar space
    % (9)   Take the FFT of (7)
    % (10)  Take the FFT of (8)
    % (11)  Compute phase correlation of (9) and (10)
    % (12)  Find the location (x,y) in (11) of the peak of the phase correlation
    % (13)  Compute angle (360 / Image Y Size) * y from (12)
    % (14)  Rotate the image from (2) by - angle from (13)
    % (15)  Rotate the image from (2) by - angle + 180 from (13)
    % (16)  Take the FFT of (14)
    % (17)  Take the FFT of (15)
    % (18)  Compute phase correlation of (3) and (16)
    % (19)  Compute phase correlation of (3) and (17)
    % (20)  Find the location (x,y) in (18) of the peak of the phase correlation
    % (21)  Find the location (x,y) in (19) of the peak of the phase correlation
    % (22)  If phase peak in (20) > phase peak in (21), (y,x) from (20) is the translation
    % (23a) Else (y,x) from (21) is the translation and also:
    % (23b) If the angle from (13) < 180, add 180 to it, else subtract 180 from it.
    % (24)  Tada!

    % Requires (ouch):

    % 6 x FFT
    % 4 x FFT Shift
    % 3 x IFFT
    % 2 x Log Polar
    % 3 x Phase Correlations
    % 2 x High Pass Filter
    % 2 x Image Rotation

    % ---------------------------------------------------------------------
   
    
    
    % Load first image (I1)

    I1 = imread('lena.bmp');

    
    

    % Load second image (I2)

    I2 = imread('lena_cropped_rotated_shifted.bmp');

    
    
    % ---------------------------------------------------------------------
   
    
    
    
    % Convert both to FFT, centering on zero frequency component

🎉3 参考文献

文章中一些内容引自网络,会注明出处或引用为参考文献,难免有未尽之处,如有不妥,请随时联系删除。

[1]李翰威,崔飞易,凌庆庆,等.基于傅里叶梅林变换的图像配准方法[J].中国医学物理学杂志, 2023, 40(5):562-567.

[2]李傲梅,姜万里.基于图像特征的傅里叶梅林变换在图像配准中的应用[J].计算机与数字工程, 2017, 45(4):5.DOI:10.3969/j.issn.1672-9722.2017.04.030.

[3]周刚.一种傅里叶-梅林变换空间图像快速配准算法[J].  2010.

[4]焦继超1,赵保军1,周刚2.一种傅里叶—梅林变换空间图像快速配准算法[J].兵工学报, 2010, 31(12):1551-1556.

🌈4 Matlab代码实现

这篇关于【傅里叶梅林图像配准】用于图像配准的傅里叶梅林相位相关性的实现(Matlab代码实现)的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/153753

相关文章

Python实现终端清屏的几种方式详解

《Python实现终端清屏的几种方式详解》在使用Python进行终端交互式编程时,我们经常需要清空当前终端屏幕的内容,本文为大家整理了几种常见的实现方法,有需要的小伙伴可以参考下... 目录方法一:使用 `os` 模块调用系统命令方法二:使用 `subprocess` 模块执行命令方法三:打印多个换行符模拟

SpringBoot+EasyPOI轻松实现Excel和Word导出PDF

《SpringBoot+EasyPOI轻松实现Excel和Word导出PDF》在企业级开发中,将Excel和Word文档导出为PDF是常见需求,本文将结合​​EasyPOI和​​Aspose系列工具实... 目录一、环境准备与依赖配置1.1 方案选型1.2 依赖配置(商业库方案)二、Excel 导出 PDF

Python实现MQTT通信的示例代码

《Python实现MQTT通信的示例代码》本文主要介绍了Python实现MQTT通信的示例代码,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有一定的参考学习价值,需要的朋友们下面随着小编来一... 目录1. 安装paho-mqtt库‌2. 搭建MQTT代理服务器(Broker)‌‌3. pytho

基于Python开发一个图像水印批量添加工具

《基于Python开发一个图像水印批量添加工具》在当今数字化内容爆炸式增长的时代,图像版权保护已成为创作者和企业的核心需求,本方案将详细介绍一个基于PythonPIL库的工业级图像水印解决方案,有需要... 目录一、系统架构设计1.1 整体处理流程1.2 类结构设计(扩展版本)二、核心算法深入解析2.1 自

使用zip4j实现Java中的ZIP文件加密压缩的操作方法

《使用zip4j实现Java中的ZIP文件加密压缩的操作方法》本文介绍如何通过Maven集成zip4j1.3.2库创建带密码保护的ZIP文件,涵盖依赖配置、代码示例及加密原理,确保数据安全性,感兴趣的... 目录1. zip4j库介绍和版本1.1 zip4j库概述1.2 zip4j的版本演变1.3 zip4

MySQL进行数据库审计的详细步骤和示例代码

《MySQL进行数据库审计的详细步骤和示例代码》数据库审计通过触发器、内置功能及第三方工具记录和监控数据库活动,确保安全、完整与合规,Java代码实现自动化日志记录,整合分析系统提升监控效率,本文给大... 目录一、数据库审计的基本概念二、使用触发器进行数据库审计1. 创建审计表2. 创建触发器三、Java

python生成随机唯一id的几种实现方法

《python生成随机唯一id的几种实现方法》在Python中生成随机唯一ID有多种方法,根据不同的需求场景可以选择最适合的方案,文中通过示例代码介绍的非常详细,需要的朋友们下面随着小编来一起学习学习... 目录方法 1:使用 UUID 模块(推荐)方法 2:使用 Secrets 模块(安全敏感场景)方法

Spring StateMachine实现状态机使用示例详解

《SpringStateMachine实现状态机使用示例详解》本文介绍SpringStateMachine实现状态机的步骤,包括依赖导入、枚举定义、状态转移规则配置、上下文管理及服务调用示例,重点解... 目录什么是状态机使用示例什么是状态机状态机是计算机科学中的​​核心建模工具​​,用于描述对象在其生命

Spring Boot 结合 WxJava 实现文章上传微信公众号草稿箱与群发

《SpringBoot结合WxJava实现文章上传微信公众号草稿箱与群发》本文将详细介绍如何使用SpringBoot框架结合WxJava开发工具包,实现文章上传到微信公众号草稿箱以及群发功能,... 目录一、项目环境准备1.1 开发环境1.2 微信公众号准备二、Spring Boot 项目搭建2.1 创建

IntelliJ IDEA2025创建SpringBoot项目的实现步骤

《IntelliJIDEA2025创建SpringBoot项目的实现步骤》本文主要介绍了IntelliJIDEA2025创建SpringBoot项目的实现步骤,文中通过示例代码介绍的非常详细,对大家... 目录一、创建 Spring Boot 项目1. 新建项目2. 基础配置3. 选择依赖4. 生成项目5.