Jetson Orin NX L4T35.5.0平台LT6911芯片 调试记录（1）MIPI问题调试

本文主要是介绍Jetson Orin NX L4T35.5.0平台LT6911芯片 调试记录（1）MIPI问题调试，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

1.前言

硬件： JetsonOrinNX16GB， 35.5.0

转换芯片： 龙讯LT6911

dts配置

			mode0 { // E2832_1920x1080_60Fpsmclk_khz = "24000";num_lanes = "4";tegra_sinterface = "serial_a";phy_mode = "DPHY";discontinuous_clk = "no";dpcm_enable = "false";cil_settletime = "0";lane_polarity = "6";
// must be 0x6 for sensors attached to CSI0/1 port, 
//since CSI0 D1 and CSI1 D0 has P/N swizzled, 
//in Orin NX 16GB, Orin NX 8GB, Orin Nano 8GB and Orin Nano 4GB modules. active_w = "1920";active_h = "1080";mode_type = "yuv";pixel_phase = "yuyv";csi_pixel_bit_depth = "16";dynamic_pixel_bit_depth = "16";readout_orientation = "0";line_length = "1920";inherent_gain = "1";

这篇关于Jetson Orin NX L4T35.5.0平台LT6911芯片 调试记录（1）MIPI问题调试的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！

---