04_led_water_flow_v0 流水灯

本文主要是介绍04_led_water_flow_v0 流水灯，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

04_led_water_flow_v0

流水灯和跑马灯都是一种常见的LED灯效，它们在灯光的变化方式上有所不同。

流水灯是一种灯效模式，LED灯在一定的时间间隔内依次点亮或熄灭，形成像水流一样的效果。而跑马灯则是LED灯在一定的时间间隔内依次从左向右或从右向左依次点亮或熄灭，形成像跑马一样的效果,每个时刻只有一个灯亮，其他灯都熄灭。

更新

使用dip开关控制跑马灯的速度和方向

知识点：

• 非循环移位寄存器的使用
• 两种不同的组合逻辑赋值风格(assign, always(*))
• 灵活利用参数设计可复用模块(模块级参数，局部参数)

module led_water_flow #(parameter LED_ON = 1'b0,  //led active lowparameter CLK_FREQ  = 50*1000*1000  //frequency of input clock
)(input  clk,  input  rst_n, input wire [5:0] dip_u6,output reg [5:0] led
);//
//Local parameter, same as const in c/c++
//For 50Mhz clock, 
//one second count to 50*1000*1000 
//one millisecond count to 50*1000 
//
localparam ONE_MSECOND = CLK_FREQ / 1000;//-------------------------------------------
//control the running speed and direction 
//according to the status of dip keys
wire [1:0] speed = dip_u6[1:0];
wire direct = dip_u6[5];//First style of assignment for combinational logic, (not for sequential logic)
//Note: left value must be wire type, here 'wire [31:0] count_max;'
wire [31:0] count_max;  
assign count_max =  (speed == 0) ? ONE_MSECOND * 2000 :(speed == 1) ? ONE_MSECOND * 1000 :(speed == 2) ? ONE_MSECOND * 500 : ONE_MSECOND * 200;
/*
//another style of assignment of combinational logic
//Note: left value must be reg type, here 'reg [31:0] count_max;'
reg [31:0] count_max;  
always @(*) begincount_max =     (speed == 0) ? ONE_MSECOND * 2000 :(speed == 1) ? ONE_MSECOND * 1000 :(speed == 2) ? ONE_MSECOND * 500  : ONE_MSECOND * 200;
end
*///---------------------------------------------------------
//water flow will light leds one by one, and then set off all leds,
//then light leds one by one, and then turn off all,recycle 
reg [31:0] count; 
wire time_on = (count == count_max-1);always @(posedge clk) beginif(~rst_n) count <= 0;else if(time_on) count <= 0;else count <= count + 1;
endwire [5:0] all_led_on = (LED_ON == 1'b1) ?  6'b111111 : 6'b000000;
wire [5:0] all_led_off = ~all_led_on;always @(posedge clk) beginif(~rst_n) led <= all_led_off;else if(time_on) beginif(led == all_led_on) led <= all_led_off;else beginif(direct == 1'b1) led <= {led[4:0], LED_ON} ; //shift leftelse led <= {LED_ON,led[5:1]} ;                 //shift rightendend//else led <= led;
end
endmodule

扩展思维

了解呼吸灯的效果，思考如何用Verilog设计实现。

这篇关于04_led_water_flow_v0 流水灯的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！

---