本文主要是介绍LT8668SXC Typec转edp/hdmi2.1/vbo，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
⚫ DP1.4a/eDP1.5 Transmitter
▪ Compliant with DisplayPort specification 1.4a for 1.62Gbps,
2.7Gbps, 5.4Gbps, 8.1Gbps
▪ Compliant with Embedded DisplayPort specification
version 1.5
▪ Support DisplayPort 1/2/4 lanes
▪ Support HDCP 1.3/2.3
▪ Support HDCP repeater
▪ Support RGB 6/8/10/12 bpc, YCbCr4:4:4/YCbCr4:2:2/
YCbCr4:2:0 8/10/12 bpc
▪ Support up to 8K@30Hz RGB 6bpc, YCbCr4:2:2 10 bpc or
YCbCr4:2:0 12 bpc
▪ Support up to 4K@120Hz RGB 6bpc, YCbCr4:2:2 10 bpc
or YCbCr4:2:0 12 bpc
▪ Support up to 8K@60Hz DSC pass-through
▪ Support static HDR10
▪ Support FEC
▪ Support Adaptive-Sync
▪ Support ASSR for eDP
▪ Support SSC
⚫ HDMI2.1 Transmitter
▪ Compliant with HDMI2.1, HDMI2.0b, HDMI1.4 and DVI1.0
▪ Data rate up to 8Gbps
▪ Support HDCP 1.4/2.3
▪ Support HDCP repeater
▪ Support RGB 8/10/12 bpc, YCbCr4:4:4/ YCbCr4:2:2/
YCbCr4:2:0 /8/10/12 bpc
▪ Support up to 8K@30Hz RGB/YCbCr4:4:4/ YCbCr4:2:2
8bpc or YCbCr4:2:0 12 bpc
▪ Support up to 4K@120Hz RGB/YCbCr4:4:4/ YCbCr4:2:2
8bpc or YCbCr4:2:0 12 bpc
▪ Support up to 8K@60Hz DSC pass-through
▪ Support static HDR10
eDP1.4b / eDPx Transmitter
▪ Compliant Embedded DisplayPort specification version
1.4b
▪ Support resolution up to 4K@60Hz
▪ Support RGB/YUV 8/10-bit
▪ Support eDP transmitter up to 8 lane with 5.4Gbps link rate
▪ Support 8 pairs eDPx @3Gbps interface
▪ Support ASSR for eDP
▪ Support SSC
LT8668SX/LT8668SXC DP 转 eDPx/eDP 源码 设置说明
1、Global 配置，globalLT.h 文件：
#define CHIP_B05 DISABLED
//DISABLED,ENABLED
// LT8668SX U3 B03 设置 DISABLED
// LT8668SX U3 B05 设置 ENABLED
// LT8668SXC : Don't care
#define CHIP_SXC ENABLED
//DISABLED,ENABLED
// LT8668SXC chip 设置 ENABLED
// LT8668SX chip 设置 DISABLED
#define LT8668SXC_EVB DISABLED
//DISABLED,ENABLED
// 如果用 LT8668SXC demo 板 调试，设置 ENABLED；否则设置 DISABLED
// 因为 LT8668SXC demo 板 的 DPRX 的 P/N 和 eDP 8lane TX 的 P/N 为了走线方便，有
swap，在寄存器配置上需要跟着 swap
这篇关于LT8668SXC Typec转edp/hdmi2.1/vbo的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
