本文主要是介绍HQX Customization Guide，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
QNX Hypervisor Customization Guide 80-PM231-1
qnx FDE配置
target/hypervisor/host/qcpe_config/8540/QCPE_config_8540_la.xml
<fde_config><!-- Total Slots for Makena are 64, of which 10 are reserved --><!-- QNX_HOST --><vm id="HOST" max_slots="2"><!-- provide two blocks for unencrypted footer in the userdata partition. On a UFS device this is 8KB--><partition name_guest="userdata" name_host="userdata" unencrypted_footer_size="0x0" in_place_encrypted="False" /><partition name_guest="misc" name_host="misc" unencrypted_footer_size="0x0" in_place_encrypted="False" /></vm><vm id="2" max_slots="38" /></fde_config>
qnx 启动qvm cmdline 配置
target/hypervisor/gvm/ivi/la/avb1-la.config
load /mnt/vm/images/linux-la.img# CMDLINE for LA GVM
cmdline "console=ttyAMA0 earlycon=pl011,0x1c090000 debug user_debug=31 loglevel=9 print-fatal-signals=1 androidboot.console=ttyAMA0 androidboot.hardware=qcom androidboot.selinux=permissive androidboot.memcg=1 root=/dev/system init=/init androidboot.bootdevice=/dev/disk/system_inactive swiotlb=2048 skip_initramfs=1 pcie_ports=compat msm_cfg.cfg_sel=1"fdt load /tmp/la.dtb
#initrd load /mnt/vm/images/initrd-arm64在vmm_service中进行启动 qvm
这篇关于HQX Customization Guide的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
