本文主要是介绍uvm白皮书练习_ch2_ch231_加入transaction,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!
2.3 为验证平平台加入各种组件
uvm白皮书练习_ch2_ch231_加入transaction
代码部分
top_tb.sv
`timescale 1ns / 1ps
`include "uvm_macros.svh"import uvm_pkg::*;
/*只能现在*/`include "my_if.sv"
`include "my_transaction.sv"
`include "my_driver.sv"module top_tb();
/*time set*/
initial begin$display("start sim");#1.5ms;$finish;
end/*fsdb*/
initial begin$display("fsdbDumpfilrs is start at %d",$time);$fsdbDumpfile("verilog.fsdb");$fsdbDumpvars(0);
endreg clk;
reg rst_n;
reg [7:0] rxd;
reg rx_dv;
wire [7:0] txd;
wire tx_en;my_if input_if (clk,rst_n);
my_if output_if (clk,rst_n);initial beginclk = 0;forever begin#100ns clk = ~ clk;end
endinitial beginrst_n =1'b0 ;#1us;rst_n =1'b1 ;
enddut my_dut(.clk (clk ),.rst_n (rst_n ),.rxd (input_if.data ),.rx_dv (input_if.valid ),.txd (output_if.data ),.tx_en (output_if.valid ) );// initial begin
// my_driver drv;
// drv=new("drv",null);
// drv.main_phase(null);
// $finish;
// end
initial beginrun_test("my_driver");
endinitial beginuvm_config_db#(virtual my_if)::set(null, "uvm_test_top", "vif", input_if);
endendmodule
my_if.sv
`ifndef MY_IF__SV
`define MY_IF__SV
interface my_if(input clk,input rst_n);logic [7:0] data;logic valid;
endinterface //my_if`endif
my_transaction.sv
`ifndef MY_TRANSACTION__SV
`define MY_TRANSACTION__SVclass my_transaction extends uvm_sequence_item;rand bit[47:0] dmac;rand bit[47:0] smac;rand bit[15:0] ether_type;rand byte pload[];rand bit[31:0] crc;constraint pload_cons{pload.size >= 46;pload.size <= 1500;}function bit[31:0] calc_crc();return 32'h0;endfunctionfunction void post_randomize();crc = calc_crc;endfunction`uvm_object_utils(my_transaction)function new(string name = "my_transaction");super.new();endfunction
endclass
`endif
my_driver.sv
// `ifndef MY_DRIVER__SV
// `define MY_DRIVER__SV
// class my_driver extends uvm_driver;
// virtual my_if vif;
// `uvm_component_utils(my_driver) //没有后缀// function new(string name="my_driver",uvm_component parent = null);
// super.new(name,parent);
// `uvm_info("my_driver", "new is called", UVM_LOW)
// endfunction //new()// virtual function void build_phase(uvm_phase phase);
// super.build_phase(phase);
// `uvm_info("my_driver", "build phase is caslled", UVM_LOW)
// if(!uvm_config_db#(virtual my_if)::get(this, "", "vif", vif))
// `uvm_fatal("my_driver", "virtual interface must be set for vif!!!") //没有后缀
// endfunction// extern task main_phase(uvm_phase phase);
// extern task drive_one_pkt(my_transaction tr);// endclass //my_driver extends uvm_driver`ifndef MY_DRIVER__SV
`define MY_DRIVER__SV
class my_driver extends uvm_driver;virtual my_if vif;`uvm_component_utils(my_driver)function new(string name = "my_driver", uvm_component parent = null);super.new(name, parent);endfunctionvirtual function void build_phase(uvm_phase phase);super.build_phase(phase);if(!uvm_config_db#(virtual my_if)::get(this, "", "vif", vif))`uvm_fatal("my_driver", "virtual interface must be set for vif!!!")endfunctionextern task main_phase(uvm_phase phase);extern task drive_one_pkt(my_transaction tr);
endclasstask my_driver::main_phase (uvm_phase phase);my_transaction tr ; /*先声明数组*/phase.raise_objection(this); //有后缀,项目真起始点vif.data <= 8'b0; vif.valid <= 1'b0;//先来一个初始化while(!vif.rst_n)@(posedge vif.clk);for(int i = 0; i < 2; i++)begin //发两轮数据包tr = new("tr");// assert (tr.randomize() with {pload.size ==20;});//源码200,这里减到20,进行随机初始化assert (tr.randomize() with {pload.size ==50;});//源码200,这里减到20,进行随机初始化// else error_process //本来此处还有断言,源码处暂时没有drive_one_pkt(tr);endrepeat(5) @(posedge vif.clk);//等待5个时钟// vif.valid <= 1'b0;phase.drop_objection(this);//运行结束
endtask //my_driver::main_phasetask my_driver::drive_one_pkt(my_transaction tr);bit [47:0] tmp_data;bit [7:0] data_q[$]; //push dmac to data_qtmp_data = tr.dmac;for(int i = 0; i < 6; i++) begindata_q.push_back(tmp_data[7:0]);tmp_data = (tmp_data >> 8);end//push smac to data_qtmp_data = tr.smac;for(int i = 0; i < 6; i++) begindata_q.push_back(tmp_data[7:0]);tmp_data = (tmp_data >> 8);end//push ether_type to data_qtmp_data = tr.ether_type;for(int i = 0; i < 2; i++) begindata_q.push_back(tmp_data[7:0]);tmp_data = (tmp_data >> 8);end//push payload to data_qfor(int i = 0; i < tr.pload.size; i++) begindata_q.push_back(tr.pload[i]);end//push crc to data_qtmp_data = tr.crc;for(int i = 0; i < 4; i++) begindata_q.push_back(tmp_data[7:0]);tmp_data = (tmp_data >> 8);end`uvm_info("my_driver", "begin to drive one pkt", UVM_LOW);repeat(3) @(posedge vif.clk);while(data_q.size() > 0) begin@(posedge vif.clk);vif.valid <= 1'b1;vif.data <= data_q.pop_front(); end@(posedge vif.clk);vif.valid <= 1'b0;`uvm_info("my_driver", "end drive one pkt", UVM_LOW);
endtask`endif// /*
// 注册
// main phase// driver one pkt// */
仿真结果
UVM_INFO @ 0: reporter [RNTST] Running test my_driver...
UVM_INFO my_driver.sv(100) @ 1100000: uvm_test_top [my_driver] begin to drive one pkt
UVM_INFO my_driver.sv(111) @ 15500000: uvm_test_top [my_driver] end drive one pkt
UVM_INFO my_driver.sv(100) @ 15500000: uvm_test_top [my_driver] begin to drive one pkt
UVM_INFO my_driver.sv(111) @ 29900000: uvm_test_top [my_driver] end drive one pkt--- UVM Report Summary ---** Report counts by severity
UVM_INFO : 5
UVM_WARNING : 0
UVM_ERROR : 0
UVM_FATAL : 0
** Report counts by id
[RNTST] 1
[my_driver] 4
小结
Error-[CNST-CIF] Constraints inconsistency failure
my_driver.sv, 57Constraints are inconsistent and cannot be solved.Please check the inconsistent constraints being printed above and rewrite them.
约束超出预设范围,会导致失败
解决方法,使用范围内的数据值进行随机化
这篇关于uvm白皮书练习_ch2_ch231_加入transaction的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!