smithchart matlab,Electronic Circuits with MATLAB, PSpice, and Smith Chart

2023-10-07 22:30

本文主要是介绍smithchart matlab,Electronic Circuits with MATLAB, PSpice, and Smith Chart,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

4212c0eb0db63c54ac443035913d4251.png

Electronic Circuits with MATLAB, PSpice, and Smith Chart

By 作者:Won Y. Yang

Jaekwon Kim

Kyung W. Park

Donghyun Baek

Sungjoon Lim

Jingon Joung

Suhyun Park

Han L. Lee

Woo June Choi

Taeho Im

Release Finelybook 出版日期:2020

Publisher Finelybook 出版社:Wiley

pages 页数: 880

ISBN-13 书号:9781119598923

ISBN-10 书号:1119598923

The Book Description robot was collected from Amazon and arranged by Finelybook

Provides practical examples of circuit design and analysis using PSpice, MATLAB, and the Smith Chart

This book presents the three technologies used to deal with electronic circuits: MATLAB, PSpice, and Smith chart. It gives students, researchers, and practicing engineers the necessary design and modelling tools for validating electronic design concepts involving bipolar junction transistors (BJTs), field-effect transistors (FET), OP Amp circuits, and analog filters.

Electronic Circuits with MATLAB®, PSpice®, and Smith Chart presents analytical solutions with the results of MATLAB analysis and PSpice simulation. This gives the reader information about the state of the art and confidence in the legitimacy of the solution, as long as the solutions obtained By 作者:using the two software tools agree with each other. For representative examples of impedance matching and filter design, the solution using MATLAB and Smith chart (Smith V4.1) are presented for comparison and crosscheck. This approach is expected to give the reader confidence in, and a deeper understanding of, the solution. In addition, this text:

Increases the reader’s understanding of the underlying processes and related equations for the design and analysis of circuits

Provides a stepping stone to RF (radio frequency) circuit design By 作者:demonstrating how MATLAB can be used for the design and implementation of microstrip filters

Features two chapters dedicated to the application of Smith charts and two-port network theory

Electronic Circuits with MATLAB®, PSpice®, and Smith Chart will be of great benefit to practicing engineers and graduate students interested in circuit theory and RF circuits.下载地址

Electronic Circuits with MATLAB, PSpice, and Smith Chart 9781119598923.zip

这篇关于smithchart matlab,Electronic Circuits with MATLAB, PSpice, and Smith Chart的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/160854

相关文章

C#图表开发之Chart详解

《C#图表开发之Chart详解》C#中的Chart控件用于开发图表功能,具有Series和ChartArea两个重要属性,Series属性是SeriesCollection类型,包含多个Series对... 目录OverviChina编程ewSeries类总结OverviewC#中,开发图表功能的控件是Char

matlab读取NC文件(含group)

matlab读取NC文件(含group): NC文件数据结构: 代码: % 打开 NetCDF 文件filename = 'your_file.nc'; % 替换为你的文件名% 使用 netcdf.open 函数打开文件ncid = netcdf.open(filename, 'NC_NOWRITE');% 查看文件中的组% 假设我们想读取名为 "group1" 的组groupName

利用matlab bar函数绘制较为复杂的柱状图,并在图中进行适当标注

示例代码和结果如下:小疑问:如何自动选择合适的坐标位置对柱状图的数值大小进行标注?😂 clear; close all;x = 1:3;aa=[28.6321521955954 26.2453660695847 21.69102348512086.93747104431360 6.25442246899816 3.342835958564245.51365061796319 4.87

C# double[] 和Matlab数组MWArray[]转换

C# double[] 转换成MWArray[], 直接赋值就行             MWNumericArray[] ma = new MWNumericArray[4];             double[] dT = new double[] { 0 };             double[] dT1 = new double[] { 0,2 };

libsvm在matlab中的使用方法

原文地址:libsvm在matlab中的使用方法 作者: lwenqu_8lbsk 前段时间,gyp326曾在论坛里问libsvm如何在matlab中使用,我还奇怪,认为libsvm是C的程序,应该不能。没想到今天又有人问道,难道matlab真的能运行libsvm。我到官方网站看了下,原来,真的提供了matlab的使用接口。 接口下载在: http://www.csie.ntu.edu.

Matlab/Simulink中PMSM模型的反电动势系数和转矩系数

Matlab/Simulink中PMSM模型的反电动势系数和转矩系数_matlab pmsm-CSDN博客

MATLAB层次聚类分析法

转自:http://blog.163.com/lxg_1123@126/blog/static/74841406201022774051963/ 层次聚类是基于距离的聚类方法,MATLAB中通过pdist、linkage、dendrogram、cluster等函数来完成。层次聚类的过程可以分这么几步: (1) 确定对象(实际上就是数据集中的每个数据点)之间的相似性,实际上就是定义一个表征

MATLAB的fix(),floor()和ceil()函数的区别与联系

fix(x),floor(x)和ceil(x)函数都是对x取整,只不过取整方向不同而已。 这里的方向是以x轴作为横坐标来看的,向右就是朝着正轴方向,向左就是朝着负轴方向。 fix(x):向0取整(也可以理解为向中间取整) floor(x):向左取整 ceil(x):向右取整 举例: 4个数:a=3.3、b=3.7、c=-3.3、d=-3.7 fix(a)=3 fl

MATLAB中的eig函数

在MATLAB中,计算矩阵A的特征值和特征向量的函数是eig(A),常用的调用格式有5种: E=eig(A):求矩阵A的全部特征值,构成向量E。 [V,D]=eig(A):求矩阵A的全部特征值,构成对角阵D,并求A的特征向量构成V的列向量。 [V,D]=eig(A,'nobalance'):与第2种格式类似,但第2种格式中先对A作相似变换后求矩阵A的特征值和特征向量,而格式3直接求矩阵A的特

MATLAB中的diag函数

diag函数功能:矩阵对角元素的提取和创建对角阵 设以下X为方阵,v为向量 1、X = diag(v,k)当v是一个含有n个元素的向量时,返回一个n+abs(k)阶方阵X,向量v在矩阵X中的第k个对角线上,k=0表示主对角线,k>0表示在主对角线上方,k<0表示在主对角线下方。例1: v=[1 2 3]; diag(v, 3) ans =      0     0     0