Linux 配置wireshark 分析thread 使用nRF-Sniffer dongle

本文主要是介绍Linux 配置wireshark 分析thread 使用nRF-Sniffer dongle，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

Linux 配置wireshark nRF-Sniffer-for-802.15.4
1.下载固件和配置文件
https://github.com/NordicSemiconductor/nRF-Sniffer-for-802.15.4
2.烧写固件

使用nRF Connect for Desktop 中的 programmer 4.3烧写
https://www.nordicsemi.com/Products/Development-tools/nrf-connect-for-desktop/download

3.配置wireshark
3.1 给wireshark开放权限
参考：https://www.cnblogs.com/potatosuper/p/14391116.html
1)Create the wireshark group.
$ sudo groupadd wireshark

2) Add your username to the wireshark group
$ sudo usermod -a -G wireshark YOUR_USER_NAME

3) Change the group ownership of file dumpcap to wireshark
$ sudo chgrp wireshark /usr/bin/dumpcap

4) Change the mode of the file dumpcap to allow execution by the group wireshark
$ sudo chmod 750 /usr/bin/dumpcap

5) Grant capabilities with setcap, man capabilities(7), setcap(8), cap_from_text(3) for more info about what are "cap_net_raw", "cap_net_admin" and "eip". Anyway, after we grant the capabilities, the dump can perform various network-related operations, use RAW and PACKET sockets; bind to any address for transparent proxying.
$ sudo setcap cap_net_raw,cap_net_admin=eip /usr/bin/dumpcap

6) Verify the change
$ sudo getcap /usr/bin/dumpcap
Output should be like below:
/usr/bin/dumpcap = cap_net_admin,cap_net_raw=eip

7) At this point, you will need to log out, or reset

3.2 安装802.15.4插件
找到Global Extcap path的位置：/usr/lib/x86_64-linux-gnu/wireshark/extcap