利用Skyline6.5的接口实现模型路径漫游

楼主也是刚开始接触Skyline开发，文中若有错误还望指出，话不多说，upupup.
实现模型动态漫游，主体就是三个步骤考虑：
（a）模型加载
（b）规划路径
（c）将路径添加给模型对象
直接上全部代码：

function run_3d() {//绘制路径
//将路径以折线展示在skyline中
//            var cVerticesArray = [0.79051472222223, 0.52489722222222, 500,
//                        90.79051472221223, 0.52489722212222, 500,
//                       145.79051472220223, 0.52489722202222, 500,
//                        179.79051472220923, 0.52489722209222, 500, ];
//     
// 
//            pILineString = SGWorld.Creator.GeometryCreator.CreateLineStringGeometry(cVerticesArray);
//             color = SGWorld.Creator.CreateColor(255, 0, 0, 125);
//            var polyline = SGWorld.Creator.CreatePolyline(pILineString, color);//加载3d模型；CreateDynamicObject接口第三、四个参数绑定在一起；传的0表示我传的3d模型，第四个就是加载模型的具体路径了，var dynamicObject = SGWorld.Creator.CreateDynamicObject(0, 1, 0, "filepath", 1000, 0, 0, "动态对象");//规划模型具体路径；var wayPoint1 = SGWorld.Creator.CreateRouteWaypoint(0.79051472222223, 0.52489722222222, 1000000, 8000000);var wayPoint2 = SGWorld.Creator.CreateRouteWaypoint(90.79051472221223, 0.52489722212222, 1000000, 8000000);var wayPoint3 = SGWorld.Creator.CreateRouteWaypoint(145.79051472220223, 0.52489722202222, 1000000, 8000000);var wayPoint4 = SGWorld.Creator.CreateRouteWaypoint(179.79051472220923, 0.52489722209222, 1000000, 8000000);//将飞行路径传给动态模型dynamicObject.Waypoints.AddWaypoint(wayPoint1);dynamicObject.Waypoints.AddWaypoint(wayPoint2);dynamicObject.Waypoints.AddWaypoint(wayPoint3);dynamicObject.Waypoints.AddWaypoint(wayPoint4);//CircularRoute的true值表示执行完当前一次完整路由再继续执行，dynamicObject.CircularRoute = true；dynamicObject.RestartRoute(0);SGWorld.Navigate.FlyTo(dynamicObject);}

调用之后，我们可以看看效果!

加上定时器不断触发之后：