小程序两个按钮并排_如何在iPad上并排摆脱两个应用程序

2024-01-15 09:30

本文主要是介绍小程序两个按钮并排_如何在iPad上并排摆脱两个应用程序,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

小程序两个按钮并排

小程序两个按钮并排

Crossed-out iPad Split View

While using your iPad, you may end up with two app windows on the screen by accident due to multitasking features called Slide Over and Split View. The extra app window can be frustrating to remove if you don’t know the right gestures. Here’s how to do it.

使用iPad时,由于名为Slide Over和Split View的多任务功能 ,您可能会偶然在屏幕上看到两个应用程序窗口。 如果您不知道正确的手势,则多余的应用程序窗口可能会令人沮丧。 这是操作方法。

如何摆脱iPad上的小浮动窗口(滑倒) (How to Get Rid of a Small Floating Window on iPad (Slide Over))

While using your iPad, you may end up with a smaller window off to the side hovering over a full-screen app. This is called Slide Over, and it looks like this.

使用iPad时,您可能会遇到一个较小的窗口,该窗口悬停在全屏应用程序上方。 这称为“滑过”,看起来像这样。

An example of Slide Over on the iPad

To dismiss the small Slide Over window, place your finger on the control bar at the top of the Slide Over window, and quickly swipe it toward the right edge of the screen if the window is on the right side, or swipe toward the left edge of the screen if the window is on the left.

要关闭较小的“滑动”窗口,请将手指放在“滑动”窗口顶部的控制栏上,如果窗口在右侧,则向屏幕右边缘快速滑动,或向左边缘滑动如果窗口在屏幕左侧

Slide side view window to dimiss on iPad

For most people, this does the trick, but you are technically only hiding the Slide Over window, not closing it. It can still be recalled by swiping it back from the edge of the screen corresponding to the side you hid it on.

对于大多数人来说,这是可行的方法,但是从技术上讲,您只是隐藏“滑动”窗口,而不是将其关闭。 仍可以通过从与隐藏它的一侧相对应的屏幕边缘向后轻扫它来调出它。

To fully close a Slide Over window, hold your finger on the control bar at the top, and slide it slowly toward the edge of the screen until it becomes part of a split-screen view (called Split View). Then you can close the unwanted window by sliding the black partition between the two windows all the way to the edge of the screen until one window disappears (See “How to Get Rid of Split Screen on iPad” below).

要完全关闭“滑动”窗口,请用手指按住顶部的控制栏,然后将其缓慢朝屏幕边缘滑动,直到它成为分屏视图(称为“分屏视图”)的一部分。 然后,您可以通过将两个窗口之间的黑色分区一直滑到屏幕边缘直到一个窗口消失来关闭不需要的窗口(请参阅下面的“如何摆脱iPad上的分屏显示”)。

If you’d like to disable Slide Over in Settings so it never shows up again, you can disable multitasking on your iPad.

如果您想在“设置”中禁用“滑行”以使其不再显示,则可以在iPad上禁用多任务处理 。

如何摆脱iPad上的拆分屏幕(拆分视图) (How to Get Rid of Split Screen on iPad (Split View))

Sometimes, you might end up with two app windows side by side on your iPad’s screen. This is called Split View, and it looks like this.

有时,您最终可能会在iPad屏幕上并排看到两个应用程序窗口。 这称为“拆分视图”,看起来像这样。

An example of Split View on the iPad

If you’d like to dismiss the split-screen view (by getting rid of one of the windows), place your finger on the center of the black partition line, and drag it at a steady medium speed toward the right edge of the screen.

如果要关闭分屏视图(摆脱一个窗口),请将手指放在黑色分隔线的中心,然后以稳定的中速向屏幕右边缘拖动。

Dismissing Split View on iPad Step 1

As you slide closer to the edge of the screen, the apps will blur out, and you will see two windows with the apps’ icons in them instead. Keep sliding your finger to the right.

当您滑近屏幕边缘时,应用程序将模糊,您将看到两个带有应用程序图标的窗口。 继续向右滑动手指。

Dismissing Split View on iPad Step 2

Toward the very edge of the screen, the black partition between the two windows will begin to grow wider (this visually signifies that you are about to “break up” Split View). Keep sliding your finger until you reach the edge of the screen.

在屏幕的最边缘,两个窗口之间的黑色分区将开始变宽(这在视觉上表示您将“分解”拆分视图)。 继续滑动手指,直到到达屏幕边缘。

Dismissing Split View on iPad Step 3

Once at the edge of the screen, release your finger, and the Split View should be gone.

到达屏幕边缘后,松开手指,拆分视图应该消失了。

Maps on iPad

If you’d like to disable Split Screen in Settings so it never shows up again, you can disable multitasking on your iPad.

如果您想在“设置”中禁用“分屏”以使其不再显示,则可以在iPad上禁用多任务处理。

了解有关分屏/多任务处理的更多信息,或完全禁用它 (Learn More About Split Screen/Multitasking—or Disable it Completely)

Multitasking features on the iPad can be quite handy and powerful if you get the hang of them. Because of the nuances of the gestures involved, they do take patience and practice to get just right.

如果您掌握了iPad上的多任务处理功能, 它们将非常方便且强大 。 由于所涉及手势的细微差别,它们确实需要耐心和练习才能正确对待。

On the other hand, if you prefer to use the iPad as a single-task device, or you keep bringing up extra app windows by accident, you can easily turn off Split View and Slide Over in the Settings.

另一方面,如果您更喜欢将iPad用作单任务设备,或者意外地继续打开其他应用程序窗口,则可以轻松地在“设置”中关闭“拆分视图”和“滑过” 。

翻译自: https://www.howtogeek.com/664496/how-to-get-rid-of-two-windows-side-by-side-on-an-ipad/

小程序两个按钮并排

这篇关于小程序两个按钮并排_如何在iPad上并排摆脱两个应用程序的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/608428

相关文章

C语言实现两个变量值交换的三种方式

《C语言实现两个变量值交换的三种方式》两个变量值的交换是编程中最常见的问题之一,以下将介绍三种变量的交换方式,其中第一种方式是最常用也是最实用的,后两种方式一般只在特殊限制下使用,需要的朋友可以参考下... 目录1.使用临时变量(推荐)2.相加和相减的方式(值较大时可能丢失数据)3.按位异或运算1.使用临时

如何用java对接微信小程序下单后的发货接口

《如何用java对接微信小程序下单后的发货接口》:本文主要介绍在微信小程序后台实现发货通知的步骤,包括获取Access_token、使用RestTemplate调用发货接口、处理AccessTok... 目录配置参数 调用代码获取Access_token调用发货的接口类注意点总结配置参数 首先需要获取Ac

基于Python开发PDF转Doc格式小程序

《基于Python开发PDF转Doc格式小程序》这篇文章主要为大家详细介绍了如何基于Python开发PDF转Doc格式小程序,文中的示例代码讲解详细,感兴趣的小伙伴可以跟随小编一起学习一下... 用python实现PDF转Doc格式小程序以下是一个使用Python实现PDF转DOC格式的GUI程序,采用T

java两个List的交集,并集方式

《java两个List的交集,并集方式》文章主要介绍了Java中两个List的交集和并集的处理方法,推荐使用Apache的CollectionUtils工具类,因为它简单且不会改变原有集合,同时,文章... 目录Java两个List的交集,并集方法一方法二方法三总结java两个List的交集,并集方法一

Vue中动态权限到按钮的完整实现方案详解

《Vue中动态权限到按钮的完整实现方案详解》这篇文章主要为大家详细介绍了Vue如何在现有方案的基础上加入对路由的增、删、改、查权限控制,感兴趣的小伙伴可以跟随小编一起学习一下... 目录一、数据库设计扩展1.1 修改路由表(routes)1.2 修改角色与路由权限表(role_routes)二、后端接口设计

将java程序打包成可执行文件的实现方式

《将java程序打包成可执行文件的实现方式》本文介绍了将Java程序打包成可执行文件的三种方法:手动打包(将编译后的代码及JRE运行环境一起打包),使用第三方打包工具(如Launch4j)和JDK自带... 目录1.问题提出2.如何将Java程序打包成可执行文件2.1将编译后的代码及jre运行环境一起打包2

Python如何计算两个不同类型列表的相似度

《Python如何计算两个不同类型列表的相似度》在编程中,经常需要比较两个列表的相似度,尤其是当这两个列表包含不同类型的元素时,下面小编就来讲讲如何使用Python计算两个不同类型列表的相似度吧... 目录摘要引言数字类型相似度欧几里得距离曼哈顿距离字符串类型相似度Levenshtein距离Jaccard相

在不同系统间迁移Python程序的方法与教程

《在不同系统间迁移Python程序的方法与教程》本文介绍了几种将Windows上编写的Python程序迁移到Linux服务器上的方法,包括使用虚拟环境和依赖冻结、容器化技术(如Docker)、使用An... 目录使用虚拟环境和依赖冻结1. 创建虚拟环境2. 冻结依赖使用容器化技术(如 docker)1. 创

使用Navicat工具比对两个数据库所有表结构的差异案例详解

《使用Navicat工具比对两个数据库所有表结构的差异案例详解》:本文主要介绍如何使用Navicat工具对比两个数据库test_old和test_new,并生成相应的DDLSQL语句,以便将te... 目录概要案例一、如图两个数据库test_old和test_new进行比较:二、开始比较总结概要公司存在多

C#比较两个List集合内容是否相同的几种方法

《C#比较两个List集合内容是否相同的几种方法》本文详细介绍了在C#中比较两个List集合内容是否相同的方法,包括非自定义类和自定义类的元素比较,对于非自定义类,可以使用SequenceEqual、... 目录 一、非自定义类的元素比较1. 使用 SequenceEqual 方法(顺序和内容都相等)2.