本文主要是介绍LoadBalancer将服务暴露到外部实现负载均衡Openelb-layer2模式配置介绍，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
目录
一.openelb简介
二.主要介绍layer2模式
1.简介
2.原理
3.部署
（1）先在集群master上开启kube-proxy的strictARP
（2）应用下载openelb.yaml（需要修改镜像地址）
（3）编写yaml文件来添加eip地址池
（4）创建service
（5）验证暴露到外部并且负载均衡实现
（6）卸载openelb
一.openelb简介
OpenELB是一个开源的企业级负载均衡器，它为 Kubernetes 集群提供了强大的负载均衡功能。OpenELB 通过与 Kubernetes API 交互来获取服务和端点信息，并与 Kubernetes的内部组件（如 etcd）进行通信，以获取集群状态信息。这使得 OpenELB 能够动态地感知到整个集群的状态和服务变化。他可以根据 Kubernetes 中服务和端点的变化动态地更新负载均衡策略，确保流量（VIP流量）能够按照需求正确地路由到后端 Pod。之后的文章会讲述几类负载均衡器如何使用。
二.主要介绍layer2模式
1.简介
网络通信中使用以太网的二层（数据链路层）交换机进行数据转发的一种工作方式。在Layer2模式下，交换机根据设备的物理地址（MAC地址）来决定数据包应该转发到哪个端口。如果node1出现故障，OpenELB 会重新向路由器发送 APR/NDP 数据包，将 Service IP 地址映射到 node2的 MAC 地址，Service 流量切换到node2，这个过程可能会出现服务中断。
2.原理
单manager情况下，在设置strictARP后，openelb-manager持续的监听局域网中的ARP请求，请求IP符合IP池里面已经使用的IP时主动响应。
3.部署
（1）先在集群master上开启kube-proxy的strictARP
目的地使所有网卡停止响应其他网卡请求，以openelb来替代。
[root@k8s-master service]# kubectl edit configmap kube-proxy -n kube-system
#将strictARP改为true
（2）应用下载openelb.yaml（需要修改镜像地址）
这里的文件已经修改好了的，一般是需要将1267和1300行两处的image地址更改（kubespheredev/kube-webhook-certgen:v1.1.1）
链接：百度网盘 请输入提取码 取码：df6b
[root@k8s-master service]# kubectl apply -f openelb.yaml
[root@k8s-master service]# kubectl get ns #查看到已经新建了ns
NAME STATUS AGE
default Active 116m
kube-node-lease Active 116m
kube-public Active 116m
kube-system Active 116m
myns Active 88m
openelb-system Active 17s
[root@k8s-master service]# kubectl get pods -n openelb-system #ns中已经运行需要的pod
NAME READY STATUS RESTARTS AGE
openelb-admission-create-g4q5f 0/1 Completed 0 17s
openelb-admission-patch-j679s 0/1 Completed 0 17s
openelb-keepalive-vip-jk5lh 1/1 Running 0 8s #我这里有两个node，应用出两个vip
openelb-keepalive-vip-xcjpw 1/1 Running 0 8s
openelb-manager-99b49789c-ssn4x 1/1 Running 0 17s（3）编写yaml文件来添加eip地址池
[root@k8s-master service]# vim ip-pool.yaml
apiVersion: network.kubesphere.io/v1alpha2 #版本可以在成功应用openelb之后使用kubectl explain Eip.apiVersion来查看
kind: Eip
metadata:name: my-eip-pool
spec:address: 192.168.2.11-192.168.2.20 #写一段没有使用的IP地址范围作为ip-pool，要与主机位于同一网段protocol: layer2disable: falseinterface: ens33 #指定主机网卡名称
[root@k8s-master service]# kubectl apply -f ip-pool.yaml
eip.network.kubesphere.io/my-eip-pool created
[root@k8s-master service]# kubectl get eip
NAME CIDR USAGE TOTAL
my-eip-pool 192.168.2.11-192.168.2.20 10（4）创建service
[root@k8s-master service]# cat service1.yaml
apiVersion: apps/v1
kind: Deployment
metadata:labels:name: my-nginxname: my-nginxnamespace: myns
spec:replicas: 3selector:matchLabels:name: my-nginx-deploytemplate:metadata:labels:name: my-nginx-deployspec:containers:- name: my-nginx-podimage: nginxports:- containerPort: 80
---
apiVersion: v1
kind: Service
metadata:name: my-nginx-servicenamespace: mynsannotations: #这三行详情也要添加，尤为重要lb.kubesphere.io/v1alpha1: openelbprotocol.openelb.kubesphere.io/v1alpha1: layer2 eip.openelb.kubesphere.io/v1alpha2: my-eip-pool #指定创建地址池时指定的名称
spec:ports:- port: 80protocol: TCPtargetPort: 80selector:name: my-nginx-deploytype: LoadBalancer #指定type为LoadBalancerLoadBalancerIP: number#是可以指定IP的
[root@k8s-master service]# kubectl apply -f service1.yaml
deployment.apps/my-nginx created
service/my-nginx-service created
[root@k8s-master service]# kubectl get service -n myns
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
my-nginx-service LoadBalancer 10.106.211.61 192.168.2.11 80:32230/TCP 7s
[root@k8s-master service]# kubectl get pod -n myns
NAME READY STATUS RESTARTS AGE
my-nginx-5d67c8f488-2m7dz 1/1 Running 0 13s
my-nginx-5d67c8f488-knfl5 1/1 Running 0 13s
my-nginx-5d67c8f488-v49xg 1/1 Running 0 13s（5）验证暴露到外部并且负载均衡实现
主机验证
[root@k8s-master service]# kubectl exec -it my-nginx-5d67c8f488-2m7dz -n myns -- /bin/sh -c "echo pod1 > /usr/share/nginx/html/index.html"
[root@k8s-master service]# kubectl exec -it my-nginx-5d67c8f488-knfl5 -n myns -- /bin/sh -c "echo pod2 > /usr/share/nginx/html/index.html"
[root@k8s-master service]# kubectl exec -it my-nginx-5d67c8f488-v49xg -n myns -- /bin/sh -c "echo pod3 > /usr/share/nginx/html/index.html"
[root@k8s-master service]# curl 192.168.2.11
pod2
[root@k8s-master service]# curl 192.168.2.11
pod1
[root@k8s-master service]# curl 192.168.2.11
pod3
[root@k8s-master service]# curl 192.168.2.11
pod2
[root@k8s-master service]# curl 192.168.2.11
pod1
[root@k8s-master service]# curl 192.168.2.11
pod3
[root@k8s-master service]# curl 192.168.2.11浏览器验证
（6）卸载openelb
我们采用apply -f的yaml文件来配置，就直接使用delete -f 该yaml文件即可
[root@k8s-master service]# kubectl delete -f service1.yaml
deployment.apps "my-nginx" deleted
service "my-nginx-service" deleted
[root@k8s-master service]# kubectl delete -f ip-pool.yaml
eip.network.kubesphere.io "my-eip-pool" deleted
[root@k8s-master service]# kubectl delete -f openelb.yaml
namespace "openelb-system" deleted
customresourcedefinition.apiextensions.k8s.io "bgpconfs.network.kubesphere.io" deleted
customresourcedefinition.apiextensions.k8s.io "bgppeers.network.kubesphere.io" deleted
customresourcedefinition.apiextensions.k8s.io "eips.network.kubesphere.io" deleted
serviceaccount "kube-keepalived-vip" deleted
serviceaccount "openelb-admission" deleted
role.rbac.authorization.k8s.io "leader-election-role" deleted
role.rbac.authorization.k8s.io "openelb-admission" deleted
clusterrole.rbac.authorization.k8s.io "kube-keepalived-vip" deleted
clusterrole.rbac.authorization.k8s.io "openelb-admission" deleted
clusterrole.rbac.authorization.k8s.io "openelb-manager-role" deleted
rolebinding.rbac.authorization.k8s.io "leader-election-rolebinding" deleted
rolebinding.rbac.authorization.k8s.io "openelb-admission" deleted
clusterrolebinding.rbac.authorization.k8s.io "kube-keepalived-vip" deleted
clusterrolebinding.rbac.authorization.k8s.io "openelb-admission" deleted
clusterrolebinding.rbac.authorization.k8s.io "openelb-manager-rolebinding" deleted
service "openelb-admission" deleted
deployment.apps "openelb-manager" deleted
job.batch "openelb-admission-create" deleted
job.batch "openelb-admission-patch" deleted
mutatingwebhookconfiguration.admissionregistration.k8s.io "openelb-admission" deleted
validatingwebhookconfiguration.admissionregistration.k8s.io "openelb-admiss这篇关于LoadBalancer将服务暴露到外部实现负载均衡Openelb-layer2模式配置介绍的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
