基于51单片机的16x128点阵滚动广告牌 proteus仿真程序设计

前言

之前咱们讲了8x8点阵、8x16点阵、16x16点阵以及16x32点阵，这篇文章再讲一讲16x128点阵

硬件设计

该方案支持左右轮动，按键可以控制暂停、换方向。

仿真图：

程序设计

#include<reg51.h>
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
sbit sclk=P1^1;
sbit rclk=P1^2;
sbit sdin=P1^0;
sbit s1=P3^6;
sbit s2=P3^7;
bit fangxiang;
uint alt,net,s3=30*25.5;
int d1,d2;
bit mode;
uchar code tab[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",0*/0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",1*/0x00,0x80,0x01,0x02,0x06,0x02,0x78,0x82,0x08,0x82,0x08,0x82,0x08,0x82,0x08,0x82,
0xFF,0xFE,0x48,0x82,0x08,0x82,0x08,0x82,0x19,0x82,0x08,0x86,0x00,0x02,0x00,0x00,/*"生",2*/0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFC,0x42,0x08,0x42,0x08,0x42,0x08,0x42,0x08,
0x42,0x08,0x42,0x08,0x42,0x08,0x7F,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"日",3*/0x0E,0x00,0x00,0x00,0xFF,0xFF,0x10,0x00,0x0D,0x01,0x11,0x02,0x11,0x0C,0x11,0x70,
0xFF,0x80,0x11,0x60,0x11,0x10,0x11,0x0C,0x1F,0x06,0x01,0x03,0x01,0x02,0x00,0x00,/*"快",4*/0x00,0x00,0x00,0x04,0x02,0x18,0x3F,0x30,0x22,0xE0,0x22,0x48,0x22,0x04,0x62,0x02,
0x5F,0xFC,0x42,0x00,0xC2,0x00,0xC2,0x40,0x42,0x30,0x02,0x1C,0x00,0x08,0x00,0x00,/*"乐",5*/0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xFA,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*"！",6*//*--  文字:  点  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x01,0x00,0x02,0x03,0xEC,0x02,0x20,0x02,0x20,0x02,0x28,0xFE,0x26,0x12,0x20,
0x12,0x28,0x12,0x26,0x12,0x20,0x13,0xE0,0x10,0x08,0x10,0x07,0x00,0x00,0x00,0x00,/*--  文字:  阵  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x7F,0xFF,0x40,0x10,0x44,0x08,0x5B,0x10,0x60,0xE0,0x10,0x10,0x13,0x10,
0x1D,0x10,0xF1,0x10,0x17,0xFF,0x11,0x10,0x11,0x10,0x11,0x10,0x10,0x10,0x00,0x00,/*--  文字:  显  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x00,0x42,0x00,0x22,0x7F,0x1A,0x49,0x02,0x49,0xFE,0x49,0x02,0x49,0x02,
0x49,0x02,0x49,0xFE,0x49,0x02,0x7F,0x0A,0x00,0x12,0x00,0x62,0x00,0x02,0x00,0x00,/*--  文字:  示  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0x04,0x02,0x08,0x42,0x10,0x42,0x60,0x42,0x00,0x42,0x02,0x42,0x01,0x43,0xFE,
0x42,0x00,0x42,0x00,0x42,0x00,0x42,0x40,0x42,0x20,0x02,0x10,0x02,0x0C,0x00,0x00,/*--  文字:  屏  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x00,0x0C,0x7F,0xF0,0x48,0x20,0x49,0x21,0x4D,0x26,0x4B,0xF8,0x49,0x20,
0x49,0x20,0x49,0x20,0x4B,0xFF,0x4D,0x20,0x79,0x20,0x00,0x20,0x00,0x00,0x00,0x00,		/*--  文字:  程  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x24,0x10,0x24,0x60,0x25,0x80,0x7F,0xFF,0xC4,0x80,0x44,0x60,0x00,0x02,0x7C,0x92,
0x44,0x92,0x44,0x92,0x44,0xFE,0x44,0x92,0x44,0x92,0x7C,0x92,0x00,0x82,0x00,0x00,
/*--  文字:  序  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x00,0x0C,0x3F,0xF0,0x20,0x00,0x20,0x80,0x20,0x80,0x28,0x80,0xA8,0x82,
0x6A,0x81,0x29,0xFE,0x2A,0x80,0x2C,0x80,0x28,0x80,0x20,0xA0,0x20,0xC0,0x00,0x00,/*--  文字:  设  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0x00,0x02,0x00,0x42,0x00,0x33,0xFC,0x00,0x09,0x02,0x11,0x05,0x02,0x79,0xC2,
0x41,0x34,0x41,0x08,0x41,0x14,0x79,0x62,0x05,0x82,0x04,0x01,0x04,0x01,0x00,0x00,/*--  文字:  计  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0x00,0x02,0x00,0x42,0x00,0x33,0xFE,0x00,0x04,0x02,0x08,0x02,0x00,0x02,0x00,
0x02,0x00,0xFF,0xFF,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x00,0x00,/*--  文字:  与  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x10,0x00,0x10,0x07,0x10,0xF9,0x10,0x11,0x10,0x11,0x10,0x11,0x10,0x11,0x10,
0x11,0x10,0x11,0x12,0x11,0x01,0x11,0x02,0x11,0xFC,0x10,0x00,0x00,0x00,0x00,0x00,/*--  文字:  仿  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x80,0x01,0x00,0x06,0x00,0x1F,0xFF,0xE0,0x01,0x10,0x02,0x10,0x0C,0x1F,0xF0,
0x91,0x00,0x71,0x02,0x11,0x01,0x11,0x02,0x11,0xFC,0x10,0x00,0x10,0x00,0x00,0x00,/*--  文字:  真  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x08,0x20,0x08,0x20,0x09,0x2F,0xFA,0x2A,0xAC,0x2A,0xA8,0x2A,0xA8,0xFA,0xA8,
0x2A,0xA8,0x2A,0xA8,0x2A,0xAC,0x2F,0xFA,0x20,0x09,0x20,0x08,0x00,0x08,0x00,0x00,0x10,0x04,0x1F,0xFC,0x00,0x84,0x01,0x00,0x01,0x00,0x01,0x04,0x00,0xFC,0x00,0x04,/*"h",7*/0x00,0x00,0x00,0x98,0x01,0x24,0x01,0x44,0x01,0x44,0x01,0x44,0x00,0xFC,0x00,0x04,/*"a",8*/0x01,0x01,0x01,0xFF,0x00,0x85,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x70,0x00,0x00,/*"p",9*/0x01,0x01,0x01,0xFF,0x00,0x85,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x70,0x00,0x00,/*"p",10*/0x01,0x01,0x01,0x81,0x01,0x71,0x00,0x0E,0x00,0x18,0x01,0x60,0x01,0x80,0x01,0x00,/*"y",11*/0x00,0x00,0x00,0x0C,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*".",12*/0x10,0x00,0x1F,0xFC,0x00,0x88,0x01,0x04,0x01,0x04,0x00,0x88,0x00,0x70,0x00,0x00,/*"b",13*/0x00,0x00,0x01,0x04,0x19,0x04,0x19,0xFC,0x00,0x04,0x00,0x04,0x00,0x00,0x00,0x00,/*"i",14*/0x01,0x04,0x01,0x04,0x01,0xFC,0x00,0x84,0x01,0x04,0x01,0x00,0x01,0x80,0x00,0x00,/*"r",15*/0x00,0x00,0x01,0x00,0x01,0x00,0x07,0xF8,0x01,0x04,0x01,0x04,0x00,0x00,0x00,0x00,/*"t",16*/0x10,0x04,0x1F,0xFC,0x00,0x84,0x01,0x00,0x01,0x00,0x01,0x04,0x00,0xFC,0x00,0x04,/*"h",17*/0x00,0x00,0x00,0x70,0x00,0x88,0x01,0x04,0x01,0x04,0x11,0x08,0x1F,0xFC,0x00,0x04,/*"d",18*/0x00,0x00,0x00,0x98,0x01,0x24,0x01,0x44,0x01,0x44,0x01,0x44,0x00,0xFC,0x00,0x04,/*"a",19*/0x01,0x01,0x01,0x81,0x01,0x71,0x00,0x0E,0x00,0x18,0x01,0x60,0x01,0x80,0x01,0x00,/*"y",20*/0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xCC,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,/*"!",21*/0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",22*/0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*" ",23*/};void delay(uint z)	   //延时子函数
{uchar x;for(;z>0;z--)for(x=110;x>0;x--);
}void writedata(uchar dat1,uchar dat2,uchar dat3,uchar dat4,uchar dat5,uchar dat6,uchar dat7,uchar dat8,uchar dat9,uchar dat10,uchar dat11,uchar dat12,uchar dat13,uchar dat14,uchar dat15,uchar dat16)	 //595显示子函数
{uchar i;for(i=0;i<8;i++)		//循环八次{dat1=dat1>>1;		//数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat2=dat2>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat3=dat3>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat4=dat4>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)		//循环八次{dat5=dat5>>1;		//数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat6=dat6>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat7=dat7>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat8=dat8>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)		//循环八次{dat9=dat9>>1;		//数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat10=dat10>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat11=dat11>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat12=dat12>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)		//循环八次{dat13=dat13>>1;		//数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat14=dat14>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat15=dat15>>1;	  //数据左移sdin=CY;sclk=1;sclk=0;} for(i=0;i<8;i++)	  //循环八次{dat16=dat16>>1;	  //数据左移sdin=CY;sclk=1;

附：http://www.jh-tec.cn/archives/7543