本文主要是介绍C++将任意文件编码为汉字文本实现简单加密，将汉字文本转码还原原文件实现解密，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
C++将任意文件编码为汉字文本实现简单加密，将汉字文本转码还原原文件实现解密。
#include <QCoreApplication>
#include <iostream>
#include <fstream>
#include <map>
#include <vector>
#include <string>
#include <locale>
// 创建字节到汉字的映射
std::map<uint8_t, std::string> byte_to_hanzi = {
{0x00, "凡"}, {0x01, "周"}, {0x02, "张"}, {0x03, "古"},
{0x04, "陈"}, {0x05, "菲"}, {0x06, "慧"}, {0x07, "伟"},
{0x08, "梅"}, {0x09, "邓"}, {0x0A, "钰"}, {0x0B, "琳"},
{0x0C, "浩"}, {0x0D, "语"}, {0x0E, "洲"}, {0x0F, "蓓"},
{0x10, "京"}, {0x11, "垓"}, {0x12, "秭"}, {0x13, "穰"},
{0x14, "沟"}, {0x15, "涧"}, {0x16, "正"}, {0x17, "载"},
{0x18, "极"}, {0x19, "恒"}, {0x1A, "酸"}, {0x1B, "僧"},
{0x1C, "祇"}, {0x1D, "那"}, {0x1E, "由"}, {0x1F, "他"},
{0x20, "甲"}, {0x21, "乙"}, {0x22, "丙"}, {0x23, "丁"},
{0x24, "戊"}, {0x25, "己"}, {0x26, "庚"}, {0x27, "辛"},
{0x28, "壬"}, {0x29, "癸"}, {0x2A, "子"}, {0x2B, "丑"},
{0x2C, "寅"}, {0x2D, "卯"}, {0x2E, "辰"}, {0x2F, "巳"},
{0x30, "午"}, {0x31, "未"}, {0x32, "申"}, {0x33, "酉"},
{0x34, "戌"}, {0x35, "亥"}, {0x36, "东"}, {0x37, "南"},
{0x38, "西"}, {0x39, "北"}, {0x3A, "中"}, {0x3B, "春"},
{0x3C, "夏"}, {0x3D, "秋"}, {0x3E, "冬"}, {0x3F, "上"},
{0x40, "下"}, {0x41, "左"}, {0x42, "右"}, {0x43, "前"},
{0x44, "后"}, {0x45, "外"}, {0x46, "内"}, {0x47, "大"},
{0x48, "小"}, {0x49, "高"}, {0x4A, "低"}, {0x4B, "远"},
{0x4C, "近"}, {0x4D, "长"}, {0x4E, "短"}, {0x4F, "宽"},
{0x50, "窄"}, {0x51, "强"}, {0x52, "弱"}, {0x53, "黑"},
{0x54, "白"}, {0x55, "红"}, {0x56, "绿"}, {0x57, "蓝"},
{0x58, "黄"}, {0x59, "金"}, {0x5A, "木"}, {0x5B, "水"},
{0x5C, "火"}, {0x5D, "土"}, {0x5E, "风"}, {0x5F, "雷"},
{0x60, "电"}, {0x61, "雨"}, {0x62, "雪"}, {0x63, "云"},
{0x64, "雾"}, {0x65, "龙"}, {0x66, "虎"}, {0x67, "鸟"},
{0x68, "鱼"}, {0x69, "花"}, {0x6A, "草"}, {0x6B, "谭"},
{0x6C, "虫"}, {0x6D, "马"}, {0x6E, "牛"}, {0x6F, "羊"},
{0x70, "猪"}, {0x71, "狗"}, {0x72, "猫"}, {0x73, "鼠"},
{0x74, "兔"}, {0x75, "蛇"}, {0x76, "鹰"}, {0x77, "狼"},
{0x78, "熊"}, {0x79, "星"}, {0x7A, "月"}, {0x7B, "日"},
{0x7C, "光"}, {0x7D, "暗"}, {0x7E, "力"}, {0x7F, "气"},
{0x80, "神"}, {0x81, "魔"}, {0x82, "妖"}, {0x83, "仙"},
{0x84, "佛"}, {0x85, "人"}, {0x86, "鬼"}, {0x87, "魂"},
{0x88, "灵"}, {0x89, "梦"}, {0x8A, "爱"}, {0x8B, "恨"},
{0x8C, "情"}, {0x8D, "欲"}, {0x8E, "喜"}, {0x8F, "怒"},
{0x90, "哀"}, {0x91, "乐"}, {0x92, "怨"}, {0x93, "惊"},
{0x94, "恐"}, {0x95, "悲"}, {0x96, "痛"}, {0x97, "伤"},
{0x98, "疾"}, {0x99, "病"}, {0x9A, "死"}, {0x9B, "生"},
{0x9C, "老"}, {0x9D, "少"}, {0x9E, "地"}, {0x9F, "天"},
{0xA0, "山"}, {0xA1, "海"}, {0xA2, "岛"}, {0xA3, "川"},
{0xA4, "河"}, {0xA5, "湖"}, {0xA6, "江"}, {0xA7, "溪"},
{0xA8, "泉"}, {0xA9, "沙"}, {0xAA, "漠"}, {0xAB, "湾"},
{0xAC, "港"}, {0xAD, "村"}, {0xAE, "镇"}, {0xAF, "城"},
{0xB0, "氟"}, {0xB1, "都"}, {0xB2, "国"}, {0xB3, "府"},
{0xB4, "皇"}, {0xB5, "王"}, {0xB6, "帝"}, {0xB7, "崇"},
{0xB8, "妃"}, {0xB9, "公"}, {0xBA, "侯"}, {0xBB, "伯"},
{0xBC, "睿"}, {0xBD, "男"}, {0xBE, "将"}, {0xBF, "军"},
{0xC0, "帅"}, {0xC1, "士"}, {0xC2, "卒"}, {0xC3, "兵"},
{0xC4, "旅"}, {0xC5, "团"}, {0xC6, "连"}, {0xC7, "排"},
{0xC8, "班"}, {0xC9, "战"}, {0xCA, "斗"}, {0xCB, "攻"},
{0xCC, "守"}, {0xCD, "敌"}, {0xCE, "友"}, {0xCF, "盟"},
{0xD0, "社"}, {0xD1, "会"}, {0xD2, "党"}, {0xD3, "团"},
{0xD4, "队"}, {0xD5, "部"}, {0xD6, "组"}, {0xD7, "队"},
{0xD8, "队"}, {0xD9, "校"}, {0xDA, "场"}, {0xDB, "店"},
{0xDC, "院"}, {0xDD, "馆"}, {0xDE, "堂"}, {0xDF, "舍"},
{0xE0, "房"}, {0xE1, "屋"}, {0xE2, "室"}, {0xE3, "厅"},
{0xE4, "廊"}, {0xE5, "庙"}, {0xE6, "塔"}, {0xE7, "楼"},
{0xE8, "台"}, {0xE9, "殿"}, {0xEA, "寺"}, {0xEB, "宫"},
{0xEC, "阁"}, {0xED, "堂"}, {0xEE, "院"}, {0xEF, "盐"},
{0xF0, "氧"}, {0xF1, "户"}, {0xF2, "门"}, {0xF3, "窗"},
{0xF4, "墙"}, {0xF5, "柱"}, {0xF6, "梁"}, {0xF7, "顶"},
{0xF8, "基"}, {0xF9, "础"}, {0xFA, "路"}, {0xFB, "桥"},
{0xFC, "街"}, {0xFD, "巷"}, {0xFE, "预"}, {0xFF, "满"}
};
// 创建汉字到字节的映射
std::map<std::string, uint8_t> hanzi_to_byte;
// 编码函数：二进制文件 -> 汉字文件
void encode_to_hanzi(const std::string& input_file, const std::string& output_file) {
std::ifstream ifs(input_file, std::ios::binary);
std::ofstream ofs(output_file, std::ios::binary);
uint8_t byte;
while (ifs.read(reinterpret_cast<char*>(&byte), sizeof(byte))) {
ofs << byte_to_hanzi[byte];
}
}
// 读取并处理文件中的每个汉字
/* 这方法是注释掉的，也可以使用，按二进制读取文件。
void decode_to_binary(const std::string& input_file, const std::string& output_file) {
std::ifstream ifs(input_file, std::ios::binary);
std::ofstream ofs(output_file, std::ios::binary);
if (!ifs.is_open() || !ofs.is_open()) {
std::cerr << "无法打开文件" << std::endl;
return;
}
char byte;
// 用于存储单个汉字的3个字节
std::string hanzi;
while (ifs.get(byte)) {
if ((byte & 0x80) == 0) {
// ASCII字符，直接处理
// ...处理ASCII字符...
} else {
// 汉字的第一个字节
hanzi.push_back(byte);
// 读取剩余的两个字节
for (int i = 0; i < 2; ++i) {
if (ifs.get(byte)) {
hanzi.push_back(byte);
} else {
// 文件结束或读取错误
std::cerr << "文件读取错误" << std::endl;
return;
}
}
// 查找汉字对应的字节值并写入输出文件
auto it = hanzi_to_byte.find(hanzi);
if (it != hanzi_to_byte.end()) {
ofs.write(reinterpret_cast<const char*>(&it->second), sizeof(uint8_t));
} else {
std::cerr << "映射中未找到汉字: " << hanzi << std::endl;
}
// 清空hanzi字符串以读取下一个汉字
hanzi.clear();
}
}
}
*/
// 将宽字符串转换为UTF-8编码的普通字符串
std::string wstring_to_utf8(const std::wstring& wstr) {
// 定义一个用于存储转换后字符串的变量
std::string converted_str;
// 初始化转换状态对象
std::mbstate_t state = std::mbstate_t();
// 获取宽字符串的指针
const wchar_t* wstr_ptr = wstr.data();
// 计算转换为多字节字符串所需的长度
size_t len = std::wcsrtombs(nullptr, &wstr_ptr, 0, &state);
// 调整目标字符串的大小以适应转换后的长度
converted_str.resize(len);
// 执行实际的转换操作
std::wcsrtombs(&converted_str[0], &wstr_ptr, len, &state);
// 返回转换后的UTF-8字符串
return converted_str;
}
//这方法通用一些，读取宽字符。将包含汉字的文件解码为二进制文件
void decode_to_binary(const std::string& input_file, const std::string& output_file) {
// 以宽字符模式打开输入文件
std::wifstream ifs(input_file);
// 设置文件流的locale为UTF-8编码
ifs.imbue(std::locale("en_US.UTF-8"));
// 以二进制模式打开输出文件
std::ofstream ofs(output_file, std::ios::binary);
// 检查文件是否成功打开
if (!ifs.is_open() || !ofs.is_open()) {
// 如果无法打开文件，则输出错误信息并返回
std::wcerr << L"无法打开文件" << std::endl;
return;
}
// 定义一个宽字符变量用于读取输入文件中的字符
wchar_t wch;
// 循环读取每个字符
while (ifs.get(wch)) {
// 检查读取的字符是否是ASCII字符
if (wch <= 0x7F) {
// 如果是ASCII字符，则直接处理（此处省略具体处理代码）
// ...处理ASCII字符...
} else {
// 如果不是ASCII字符，则认为是汉字字符
// 创建一个只包含一个汉字的宽字符串
std::wstring hanzi(1, wch);
// 将宽字符串转换为UTF-8编码的字符串
std::string s = wstring_to_utf8(hanzi);
// 在映射中查找转换后的字符串对应的字节值
auto it = hanzi_to_byte.find(s);
if (it != hanzi_to_byte.end()) {
// 如果找到，则将字节值写入输出文件
ofs.write(reinterpret_cast<const char*>(&it->second), sizeof(uint8_t));
} else {
// 如果未找到，则输出错误信息
std::wcerr << L"映射中未找到汉字: " << hanzi << std::endl;
}
}
}
}
int main(int argc, char *argv[])
{
QCoreApplication a(argc, argv);
for (const auto& pair : byte_to_hanzi) {
hanzi_to_byte[pair.second] = pair.first;
}
// 调用编码函数
encode_to_hanzi("1.xls", "hanzi_output.txt");
// 调用解码函数
decode_to_binary("hanzi_output.txt", "2.xls");
return a.exec();
}
这篇关于C++将任意文件编码为汉字文本实现简单加密，将汉字文本转码还原原文件实现解密的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
