本文主要是介绍SEGGER Embedded Studio IDE移植FreeRTOS，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
SEGGER Embedded Studio IDE移植FreeRTOS
- 一、简介
- 二、技术路线
- 2.1 获取FreeRTOS源码
- 2.2 将必要的文件复制到工程中
- 2.2.1 移植C文件
- 2.2.2 移植portable文件
- 2.2.3 移植头文件
- 2.3 创建FreeRTOSConfig.h并进行配置
- 2.3.1 处理中断优先级
- 2.3.2 `configASSERT( x )`的处理
- 2.3.3 关于系统时钟、`configCPU_CLOCK_HZ`和`configSYSTICK_CLOCK_HZ`的一点说明
- 2.3.4 动态内存和`vApplicationGetIdleTaskMemory`符号
- 2.3.4 操作系统那三个系统调用
- 2.3.5 `FreeRTOSConfig.h`的代码
- 2.4 测试
- 三、 总结
一、简介
SEGGER Embedded Studio虽然可以支持embOS，但是我们也可能更多的时候想移植FreeRTOS。这里我把做这个移植的操作放在这里。以便未来查阅。
在本案例中，笔者不打算使用动态内存。
二、技术路线
移植的技术路线是
- 获取FreeRTOS源码
- 将必要的文件复制到工程中
- 创建FreeRTOSConfig.h并进行配置
- 测试
2.1 获取FreeRTOS源码
这一步非常简单，就是从FreeRTOS官网下载源码包。得到的源码文件里面是这个样子。
2.2 将必要的文件复制到工程中
2.2.1 移植C文件
参考《Mastering the FreeRTOS™ Real Time Kernel》第13页的文件结构。
我们把除了croutine.c的其他的文件放到项目文件夹下新建的FreeRTOS/目录下。
2.2.2 移植portable文件
一共有2个文件要用。在FreeRTOS/Source/portable/GCC/ARM-CM4F下面把cortex-m4的编译器支持包port.c和portmacro.h考过去。
记得在Project->Option->Preprocessor的User Include Directory中加入我们新建的FreeRTOS/文件夹。
因为我没有使用动态内存，所以不需要添加heap_x.c的那些文件。那些文件在FreeRTOS/Source/portable/MemMang/下面
2.2.3 移植头文件
除了那个要自己创建的FreeRTOSConfig.h，其他的在FreeRTOSv202212.01\FreeRTOS\Source\include\下面的头文件可以都考过来。虽然有那么零星的几个其实是用不上的。
2.3 创建FreeRTOSConfig.h并进行配置
这个文件必须要自己创建的。虽然官方给了很多的模板。笔者比较推荐[官方网页的模板]。(https://www.freertos.org/a00110.html)
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H/* Here is a good place to include header files that are required across
your application. */
#include "something.h"#define configUSE_PREEMPTION 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#define configUSE_TICKLESS_IDLE 0
#define configCPU_CLOCK_HZ 60000000
#define configSYSTICK_CLOCK_HZ 1000000
#define configTICK_RATE_HZ 250
#define configMAX_PRIORITIES 5
#define configMINIMAL_STACK_SIZE 128
#define configMAX_TASK_NAME_LEN 16
#define configUSE_16_BIT_TICKS 0
#define configTICK_TYPE_WIDTH_IN_BITS TICK_TYPE_WIDTH_16_BITS
#define configIDLE_SHOULD_YIELD 1
#define configUSE_TASK_NOTIFICATIONS 1
#define configTASK_NOTIFICATION_ARRAY_ENTRIES 3
#define configUSE_MUTEXES 0
#define configUSE_RECURSIVE_MUTEXES 0
#define configUSE_COUNTING_SEMAPHORES 0
#define configUSE_ALTERNATIVE_API 0 /* Deprecated! */
#define configQUEUE_REGISTRY_SIZE 10
#define configUSE_QUEUE_SETS 0
#define configUSE_TIME_SLICING 0
#define configUSE_NEWLIB_REENTRANT 0
#define configENABLE_BACKWARD_COMPATIBILITY 0
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 5
#define configUSE_MINI_LIST_ITEM 1
#define configSTACK_DEPTH_TYPE uint32_t
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
#define configHEAP_CLEAR_MEMORY_ON_FREE 1
#define configUSE_APPLICATION_TASK_TAG 0
#define configSTATS_BUFFER_MAX_LENGTH 0xFFFF/* Memory allocation related definitions. */
#define configSUPPORT_STATIC_ALLOCATION 1
#define configSUPPORT_DYNAMIC_ALLOCATION 1
#define configKERNEL_PROVIDED_STATIC_MEMORY 1
#define configTOTAL_HEAP_SIZE 10240
#define configAPPLICATION_ALLOCATED_HEAP 1
#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 1
#define configENABLE_HEAP_PROTECTOR 1/* Hook function related definitions. */
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configCHECK_FOR_STACK_OVERFLOW 0
#define configUSE_MALLOC_FAILED_HOOK 0
#define configUSE_DAEMON_TASK_STARTUP_HOOK 0
#define configUSE_SB_COMPLETED_CALLBACK 0/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
#define configUSE_TRACE_FACILITY 0
#define configUSE_STATS_FORMATTING_FUNCTIONS 0/* Co-routine related definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES 1/* Software timer related definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY 3
#define configTIMER_QUEUE_LENGTH 10
#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE/* Interrupt nesting behaviour configuration. */
#define configKERNEL_INTERRUPT_PRIORITY [dependent of processor]
#define configMAX_SYSCALL_INTERRUPT_PRIORITY [dependent on processor and application]
#define configMAX_API_CALL_INTERRUPT_PRIORITY [dependent on processor and application]/* Define to trap errors during development. */
#define configASSERT( ( x ) ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ )/* FreeRTOS MPU specific definitions. */
#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0
#define configTOTAL_MPU_REGIONS 8 /* Default value. */
#define configTEX_S_C_B_FLASH 0x07UL /* Default value. */
#define configTEX_S_C_B_SRAM 0x07UL /* Default value. */
#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 1
#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 1
#define configENABLE_ERRATA_837070_WORKAROUND 1
#define configUSE_MPU_WRAPPERS_V1 0
#define configPROTECTED_KERNEL_OBJECT_POOL_SIZE 10
#define configSYSTEM_CALL_STACK_SIZE 128
#define configENABLE_ACCESS_CONTROL_LIST 1/* ARMv8-M secure side port related definitions. */
#define secureconfigMAX_SECURE_CONTEXTS 5/* Optional functions - most linkers will remove unused functions anyway. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_xResumeFromISR 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetSchedulerState 1
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#define INCLUDE_uxTaskGetStackHighWaterMark2 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_eTaskGetState 0
#define INCLUDE_xEventGroupSetBitFromISR 1
#define INCLUDE_xTimerPendFunctionCall 0
#define INCLUDE_xTaskAbortDelay 0
#define INCLUDE_xTaskGetHandle 0
#define INCLUDE_xTaskResumeFromISR 1/* A header file that defines trace macro can be included here. */#endif /* FREERTOS_CONFIG_H */
当然这个只是个模板。比较好的原因是这里面的每一个定义下面都有说明。我们稍加修改就可以了。
这里，笔者删掉了#include "something.h"。
2.3.1 处理中断优先级
下面这三句
/* Interrupt nesting behaviour configuration. */
#define configKERNEL_INTERRUPT_PRIORITY [dependent of processor]
#define configMAX_SYSCALL_INTERRUPT_PRIORITY [dependent on processor and application]
#define configMAX_API_CALL_INTERRUPT_PRIORITY [dependent on processor and application]
根据stm32f407改成了
/* Interrupt nesting behaviour configuration. */
#define configKERNEL_INTERRUPT_PRIORITY ( 15 << 4 )
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << 4 )
#define configMAX_API_CALL_INTERRUPT_PRIORITY
因为STM32F4的中断优先级是0 - 15，所以我设置成上面的参数。当然如果觉得不保险的话还可以参考例程。
2.3.2 configASSERT( x )的处理
这个宏的处理方法非常多。但是如果并不真的用它，可以像我这样处理。
/* Define to trap errors during development. */
#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }
2.3.3 关于系统时钟、configCPU_CLOCK_HZ和configSYSTICK_CLOCK_HZ的一点说明
为了测试方便，笔者这里只是使用了芯片内部的RC震荡时钟。所以要把configCPU_CLOCK_HZ设置成16MHz。
关于configCPU_CLOCK_HZ和configSYSTICK_CLOCK_HZ这个的设计的初衷我不清楚。但是根据调试的效果来看，如果定义了configSYSTICK_CLOCK_HZ，系统的sysTick会使能8分频。
2.3.4 动态内存和vApplicationGetIdleTaskMemory符号
把configSUPPORT_DYNAMIC_ALLOCATION关掉。但是编译后会出现要vApplicationGetIdleTaskMemory这个符号的问题。
参考官网上FreeRTOSConfig.h的模板的阐述，点一下configSUPPORT_STATIC_ALLOCATION的蓝字，就可以找到解决方案。就是把后面的代码加上去。
笔者的做法是在工程中建立一个新的文件，起名叫user_port.c，把这些代码加进去就好了。
/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an
implementation of vApplicationGetIdleTaskMemory() to provide the memory that is
used by the Idle task. */
void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer,StackType_t **ppxIdleTaskStackBuffer,configSTACK_DEPTH_TYPE *puxIdleTaskStackSize )
{
/* If the buffers to be provided to the Idle task are declared inside this
function then they must be declared static - otherwise they will be allocated on
the stack and so not exists after this function exits. */
static StaticTask_t xIdleTaskTCB;
static StackType_t uxIdleTaskStack[ configMINIMAL_STACK_SIZE ];/* Pass out a pointer to the StaticTask_t structure in which the Idle task'sstate will be stored. */*ppxIdleTaskTCBBuffer = &xIdleTaskTCB;/* Pass out the array that will be used as the Idle task's stack. */*ppxIdleTaskStackBuffer = uxIdleTaskStack;/* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer.Note that, as the array is necessarily of type StackType_t,configMINIMAL_STACK_SIZE is specified in words, not bytes. */*puxIdleTaskStackSize = configMINIMAL_STACK_SIZE;
}
/*-----------------------------------------------------------*//* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the
application must provide an implementation of vApplicationGetTimerTaskMemory()
to provide the memory that is used by the Timer service task. */
void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer,StackType_t **ppxTimerTaskStackBuffer,configSTACK_DEPTH_TYPE *puxTimerTaskStackSize )
{
/* If the buffers to be provided to the Timer task are declared inside this
function then they must be declared static - otherwise they will be allocated on
the stack and so not exists after this function exits. */
static StaticTask_t xTimerTaskTCB;
static StackType_t uxTimerTaskStack[ configTIMER_TASK_STACK_DEPTH ];/* Pass out a pointer to the StaticTask_t structure in which the Timertask's state will be stored. */*ppxTimerTaskTCBBuffer = &xTimerTaskTCB;/* Pass out the array that will be used as the Timer task's stack. */*ppxTimerTaskStackBuffer = uxTimerTaskStack;/* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer.Note that, as the array is necessarily of type StackType_t,configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */*puxTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH;
}
2.3.4 操作系统那三个系统调用
我们都知道，RTOS的运行离不开SVC_Handler、PendSV_Handler和SysTick_Handler。但是系统已经给实现了vPortSVCHandler、xPortPendSVHandler和xPortSysTickHandler。这里只要用#define把名称对应一下就可以了。
/* A header file that defines trace macro can be included here. */
#define vPortSVCHandler SVC_Handler
#define xPortPendSVHandler PendSV_Handler
#define xPortSysTickHandler SysTick_Handler
2.3.5 FreeRTOSConfig.h的代码
根据上面的操作，笔者最后的FreeRTOSConfig.h的代码如下所示
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H/* Here is a good place to include header files that are required across
your application. */#define configUSE_PREEMPTION 1
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#define configUSE_TICKLESS_IDLE 0
#define configCPU_CLOCK_HZ 16000000
//#define configSYSTICK_CLOCK_HZ 16000000
#define configTICK_RATE_HZ 1000
#define configMAX_PRIORITIES 255
#define configMINIMAL_STACK_SIZE 128
#define configMAX_TASK_NAME_LEN 16
#define configUSE_16_BIT_TICKS 0
#define configTICK_TYPE_WIDTH_IN_BITS TICK_TYPE_WIDTH_16_BITS
#define configIDLE_SHOULD_YIELD 1
#define configUSE_TASK_NOTIFICATIONS 1
#define configTASK_NOTIFICATION_ARRAY_ENTRIES 3
#define configUSE_MUTEXES 0
#define configUSE_RECURSIVE_MUTEXES 0
#define configUSE_COUNTING_SEMAPHORES 0
#define configUSE_ALTERNATIVE_API 0 /* Deprecated! */
#define configQUEUE_REGISTRY_SIZE 10
#define configUSE_QUEUE_SETS 0
#define configUSE_TIME_SLICING 0
#define configUSE_NEWLIB_REENTRANT 0
#define configENABLE_BACKWARD_COMPATIBILITY 0
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 5
#define configUSE_MINI_LIST_ITEM 1
#define configSTACK_DEPTH_TYPE uint32_t
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
#define configHEAP_CLEAR_MEMORY_ON_FREE 1
#define configUSE_APPLICATION_TASK_TAG 0
#define configSTATS_BUFFER_MAX_LENGTH 0xFFFF/* Memory allocation related definitions. */
#define configSUPPORT_STATIC_ALLOCATION 1
#define configSUPPORT_DYNAMIC_ALLOCATION 0
#define configKERNEL_PROVIDED_STATIC_MEMORY 1
#define configTOTAL_HEAP_SIZE 1024
#define configAPPLICATION_ALLOCATED_HEAP 1
#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 1
#define configENABLE_HEAP_PROTECTOR 1/* Hook function related definitions. */
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configCHECK_FOR_STACK_OVERFLOW 0
#define configUSE_MALLOC_FAILED_HOOK 0
#define configUSE_DAEMON_TASK_STARTUP_HOOK 0
#define configUSE_SB_COMPLETED_CALLBACK 0/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
#define configUSE_TRACE_FACILITY 0
#define configUSE_STATS_FORMATTING_FUNCTIONS 0/* Co-routine related definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES 1/* Software timer related definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY 3
#define configTIMER_QUEUE_LENGTH 10
#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE/* Interrupt nesting behaviour configuration. */
#define configKERNEL_INTERRUPT_PRIORITY ( 15 )
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 )
#define configMAX_API_CALL_INTERRUPT_PRIORITY /* Define to trap errors during development. */
#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }/* FreeRTOS MPU specific definitions. */
#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0
#define configTOTAL_MPU_REGIONS 8 /* Default value. */
#define configTEX_S_C_B_FLASH 0x07UL /* Default value. */
#define configTEX_S_C_B_SRAM 0x07UL /* Default value. */
#define configENFORCE_SYSTEM_CALLS_FROM_KERNEL_ONLY 1
#define configALLOW_UNPRIVILEGED_CRITICAL_SECTIONS 1
#define configENABLE_ERRATA_837070_WORKAROUND 1
#define configUSE_MPU_WRAPPERS_V1 0
#define configPROTECTED_KERNEL_OBJECT_POOL_SIZE 10
#define configSYSTEM_CALL_STACK_SIZE 128
#define configENABLE_ACCESS_CONTROL_LIST 1/* ARMv8-M secure side port related definitions. */
#define secureconfigMAX_SECURE_CONTEXTS 5/* Optional functions - most linkers will remove unused functions anyway. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_xResumeFromISR 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetSchedulerState 1
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#define INCLUDE_uxTaskGetStackHighWaterMark2 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_eTaskGetState 0
#define INCLUDE_xEventGroupSetBitFromISR 1
#define INCLUDE_xTimerPendFunctionCall 0
#define INCLUDE_xTaskAbortDelay 0
#define INCLUDE_xTaskGetHandle 0
#define INCLUDE_xTaskResumeFromISR 1/* A header file that defines trace macro can be included here. */
#define vPortSVCHandler SVC_Handler
#define xPortPendSVHandler PendSV_Handler
#define xPortSysTickHandler SysTick_Handler
#endif /* FREERTOS_CONFIG_H */
2.4 测试
参考手册，做了下面的这样一个测试用例。
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************-------------------------- END-OF-HEADER -----------------------------File : main.c
Purpose : Generic application start*/#include "stm32f407xx.h"
#include <stdio.h>
#include <stdlib.h>
#include "FreeRTOS.h"
#include "task.h"
#include "hardware.h"/*********************************************************************
*
* main()
*
* Function description
* Application entry point.
*
**********************************************************************/#define STACK_SIZE 200
static void vTaskMain(void *p);
static StaticTask_t xTaskBuffer;
static StackType_t xStack[ STACK_SIZE ];int main(void) {int i;SystemCoreClockUpdate();prvSetupHardware();TaskHandle_t xHandle = NULL;/* Create the task without using any dynamic memory allocation. */xHandle = xTaskCreateStatic(vTaskMain, /* Function that implements the task. */"NAME", /* Text name for the task. */STACK_SIZE, /* The number of indexes in the xStack array. */( void * ) 1, /* Parameter passed into the task. */155, /* Priority at which the task is created. */xStack, /* Array to use as the task's stack. */&xTaskBuffer ); /* Variable to hold the task's data structure. */vTaskStartScheduler();while(1);
}void vTaskMain(void *p){while(1){GPIOA->BSRR = 1<<7;vTaskDelay(pdMS_TO_TICKS(10));GPIOA->BSRR = 1<<7<<16;vTaskDelay(pdMS_TO_TICKS(20));}
}/*************************** End of file ****************************/运行，用示波器测PA7的输出。
三、 总结
根据上述步骤，完成FreeRTOS的移植。但是本例子中没有采用到动态内存。如果要启动动态内存，就在FreeRTOSConfig.h中把configSUPPORT_DYNAMIC_ALLOCATION这一项启用；将heap_x.c挑1个放入工程文件夹中；手动实现vPortFree函数。这次这里就不做介绍。
这篇关于SEGGER Embedded Studio IDE移植FreeRTOS的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
