本文主要是介绍TOJ 4085 Drainage Ditches 最大流，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
描述
Every time it rains on Farmer John's fields, a pond forms over Bessie's favorite clover patch. This means that the clover is covered by water for awhile and takes quite a long time to regrow. Thus, Farmer John has built a set of drainage ditches so that Bessie's clover patch is never covered in water. Instead, the water is drained to a nearby stream. Being an ace engineer, Farmer John has also installed regulators at the beginning of each ditch, so he can control at what rate water flows into that ditch.
Farmer John knows not only how many gallons of water each ditch can transport per minute but also the exact layout of the ditches, which feed out of the pond and into each other and stream in a potentially complex network.
Given all this information, determine the maximum rate at which water can be transported out of the pond and into the stream. For any given ditch, water flows in only one direction, but there might be a way that water can flow in a circle.
输入
The input includes several cases. For each case, the first line contains two space-separated integers, N (0 <= N <= 200) and M (2 <= M <= 200). N is the number of ditches that Farmer John has dug. M is the number of intersections points for those ditches. Intersection 1 is the pond. Intersection point M is the stream. Each of the following N lines contains three integers, Si, Ei, and Ci. Si and Ei (1 <= Si, Ei <= M) designate the intersections between which this ditch flows. Water will flow through this ditch from Si to Ei. Ci (0 <= Ci <= 10,000,000) is the maximum rate at which water will flow through the ditch.
输出
For each case, output a single integer, the maximum rate at which water may emptied from the pond.
最大流入门基础题，纯模板啦~
#include<stdio.h>
#include<string.h>
#include<math.h>
#include<iostream>
#include<string>
#include<algorithm>
#include<map>
#include<queue>
#include<vector>
using namespace std;
const int maxn=220;
const int inf=0x7f7f7f7f;
int G[maxn][maxn],flow[maxn],pre[maxn];
int n,m;
queue<int> q;int bfs(int s,int t)
{while(!q.empty())q.pop();memset(pre,-1,sizeof pre);pre[s]=0,flow[s]=inf;q.push(s);while(!q.empty()){int p=q.front();q.pop();if(p==t)break;for(int u=1;u<=n;u++){if(u!=s&&G[p][u]>0&&pre[u]==-1){pre[u]=p;flow[u]=min(flow[p],G[p][u]);q.push(u);}}}if(pre[t]==-1)return -1;return flow[t];
}
int EK(int s,int t)
{int delta=0,tot=0;while(1){delta=bfs(s,t); if(delta==-1)break;int p=t;while(p!=s){G[pre[p]][p]-=delta;G[p][pre[p]]+=delta;p=pre[p];}tot+=delta;}return tot;
}
int main()
{int u,v,w;while(scanf("%d%d",&m,&n)!=EOF){memset(G,0,sizeof G);memset(flow,0,sizeof flow);for(int i=0;i<m;i++){scanf("%d%d%d",&u,&v,&w);G[u][v]+=w;}printf("%d\n",EK(1,n));}
}
这篇关于TOJ 4085 Drainage Ditches 最大流的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
