华为数通HCIA、HCIP实验（含ensp实验拓扑资料）

华为数通HCIA和HCIP的考试代码为H12-811、H12-821、H12-831。

想要学好网络，掌握关键因素非常重要：多实操。

来看看具体实验目录：

HCIA目录详情

HCIP目录详情

需要实验拓扑练习的朋友，可以关注+点赞后，文章底部有我的方式（记得备注csdn）。

HCIA全套实验拓扑

HCIP全套实验拓扑

需要实验拓扑练习的朋友，可以关注+点赞后，文章底部有我的方式（记得备注csdn）。

本文重点讲解HCIA综合实验，列举一个综合实验详细脚本，更多实验讲持续更新。

HCIA综合实验案例详细设计

一、实验拓扑

二、实验需求

1. 市场部属于VLAN10，财务部属于VLAN20，技术部属于VLAN30，生产部属于VLAN40，接待中心属于VLAN50，数据中心属于VLAN60。

1. LSW1与LSW2之间的链路带宽要求为2G

1. 通过STP的配置阻塞LSW3的e0/0/4，阻塞LSW4的e0/0/3

1. 通过DHCP让市场部、财务部、技术部、生产部获得IP地址，IP规则如下：

1. 接待中心通过AC下发配置给AP1让客户可以通过无线上网

1. 把数据中心的服务器搭建好，可以为用户提供服务

1. AR1通过拨号上网

三、实验步骤

1、创建VLAN

LSW1的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
Info: Information center is disabled.
[Huawei]sysname LSW1
[LSW1]vlan batch 10 20 30 40 50 60  
[LSW1]quit

LSW2的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
[Huawei]sysname LSW2
[LSW2]vlan batch 10 20 30 40 50 60 
[LSW2]quit

LSW3的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
[Huawei]sysname LSW3
[LSW3]vlan batch 10 20 30 40 50 60 
[LSW3]quit

LSW4的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
Info: Information center is disabled.
[Huawei]sysname LSW4
[LSW4]vlan batch 10 20 30 40 50 60 
[LSW4]quit

LSW6的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
Info: Information center is disabled.
[Huawei]sysname LSW6
[LSW6]vlan batch 10 20 30 40 50 60 
[LSW6]quit

2、把接口划入到相应的VLAN

LSW1的配置

LSW2的配置

LSW3的配置

[LSW3]interface e0/0/1
[LSW3-Ethernet0/0/1]port link-type access 
[LSW3-Ethernet0/0/1]port default vlan 10
[LSW3-Ethernet0/0/1]quit
[LSW3]interface e0/0/2
[LSW3-Ethernet0/0/2]port link-type access 
[LSW3-Ethernet0/0/2]port default vlan 20
[LSW3-Ethernet0/0/2]quit

LSW4的配置

[LSW4]interface e0/0/1
[LSW4-Ethernet0/0/1]port link-type access 
[LSW4-Ethernet0/0/1]port default vlan 30
[LSW4-Ethernet0/0/1]quit
[LSW4]interface e0/0/2
[LSW4-Ethernet0/0/2]port link-type access 
[LSW4-Ethernet0/0/2]port default vlan 40
[LSW4-Ethernet0/0/2]quit

LSW6的配置

[LSW6]interface g0/0/1
[LSW6-GigabitEthernet0/0/1]port link-type access 
[LSW6-GigabitEthernet0/0/1]port default vlan 60
[LSW6-GigabitEthernet0/0/1]quit
[LSW6]interface g0/0/2
[LSW6-GigabitEthernet0/0/2]port link-type access 
[LSW6-GigabitEthernet0/0/2]port default vlan 60
[LSW6-GigabitEthernet0/0/2]quit

3、设置trunk

LSW1的配置

[LSW1]port-group 1
[LSW1-port-group-1]group-member g0/0/1 g0/0/4 g0/0/6
[LSW1-port-group-1]port link-type trunk 
[LSW1-port-group-1]port trunk allow-pass vlan 10 20 30 40 50 60 
[LSW1-port-group-1]quit

LSW2的配置

[LSW2]port-group 1
[LSW2-port-group-1]group-member GigabitEthernet 0/0/1 g0/0/4 g0/0/5
[LSW2-port-group-1]quit
[LSW2-port-group-1]port link-type trunk 
[LSW2-port-group-1]port trunk allow-pass vlan 10 20 30 40 50 60 
[LSW2-port-group-1]quit

LSW3的配置

[LSW3]port-group 1
[LSW3-port-group-1]group-member e0/0/3 e0/0/4
[LSW3-port-group-1]port link-type trunk 
[LSW3-port-group-1]port trunk allow-pass vlan 10 20 30 40 50 60 
[LSW3-port-group-1]quit

LSW4的配置

[LSW4]port-group 1
[LSW4-port-group-1]group-member e0/0/3 to e0/0/5
[LSW4-port-group-1]port link-type trunk 
[LSW4-port-group-1]port trunk allow-pass vlan 10 20 30 40 50 60 
[LSW4-port-group-1]quit

LSW6的配置

[LSW6]interface g0/0/3
[LSW6-GigabitEthernet0/0/3]port link-type trunk 
[LSW6-GigabitEthernet0/0/3]port trunk allow-pass vlan 10 20 30 40 50 60 
[LSW6-GigabitEthernet0/0/3]quit

4、设置聚合链路

LSW1的配置

[LSW1]interface Eth-Trunk 1
[LSW1-Eth-Trunk1]trunkport GigabitEthernet 0/0/2 to 0/0/3
[LSW1-Eth-Trunk1]port link-type trunk 
[LSW1-Eth-Trunk1]port trunk allow-pass vlan all 
[LSW1-Eth-Trunk1]quit

LSW2的配置

[LSW2]interface Eth-Trunk 1
[LSW2-Eth-Trunk1]trunkport GigabitEthernet 0/0/2 to 0/0/3
[LSW2-Eth-Trunk1]port link-type trunk 
[LSW2-Eth-Trunk1]port trunk allow-pass vlan all 
[LSW2-Eth-Trunk1]quit

5、STP的配置

[LSW1]stp root primary
[LSW2]stp root secondary

6、DHCP的配置

1. 市场部

[LSW1]interface Vlanif 10
[LSW1-Vlanif10]ip address 192.168.10.1 24
[LSW1-Vlanif10]quit[LSW1]dhcp enable [LSW1]ip pool vlan10 
[LSW1-ip-pool-vlan10]network 192.168.10.0 mask 24
[LSW1-ip-pool-vlan10]dns-list 3.3.3.3 4.4.4.4
[LSW1-ip-pool-vlan10]gateway-list 192.168.10.1
[LSW1-ip-pool-vlan10]quit[LSW1]interface Vlanif 10
[LSW1-Vlanif10]dhcp select global 
[LSW1-Vlanif10]quit

1. 财务部

[LSW1]interface Vlanif 20
[LSW1-Vlanif20]ip address 192.168.20.1 24
[LSW1-Vlanif20]quit[LSW1]ip pool vlan20
[LSW1-ip-pool-vlan20]network 192.168.20.0 mask 24
[LSW1-ip-pool-vlan20]gateway-list 192.168.20.1
[LSW1-ip-pool-vlan20]dns-list 3.3.3.3 4.4.4.4
[LSW1-ip-pool-vlan20]quit[LSW1]interface Vlanif 20
[LSW1-Vlanif20]dhcp select global 
[LSW1-Vlanif20]quit

1. 技术部

[LSW2]dhcp enable[LSW2]interface Vlanif 30
[LSW2-Vlanif30]ip address 192.168.30.1 24
[LSW2-Vlanif30]dhcp select interface
[LSW2-Vlanif30]dhcp server dns-list 3.3.3.3 4.4.4.4

1. 生产部

[LSW2]interface Vlanif 40[LSW2-Vlanif40]ip address 192.168.40.1 24
[LSW2-Vlanif40]dhcp select interface 
[LSW2-Vlanif40]dhcp server dns-list 3.3.3.3 4.4.4.4
[LSW2-Vlanif40]quit

7、WLAN的配置

交换机LSW4的配置

[LSW4]vlan 70
[LSW4-vlan70]quit[LSW4]interface e0/0/5
[LSW4-Ethernet0/0/5]port trunk pvid vlan 70
[LSW4-Ethernet0/0/5]port trunk allow-pass vlan 70   //trunk之前已创建[LSW4-Ethernet0/0/5]quit[LSW4]interface e0/0/4 // 因为e0/0/3阻塞了
[LSW4-Ethernet0/0/3]port trunk allow-pass vlan 70  //trunk之前已创建
[LSW4-Ethernet0/0/3]quit

LSW2的配置

[LSW2]vlan 70
[LSW2-vlan70]quit[LSW2]interface g0/0/1
[LSW2-GigabitEthernet0/0/1]port trunk allow-pass vlan 70
[LSW2-GigabitEthernet0/0/1]quit[LSW2]interface g0/0/5
[LSW2-GigabitEthernet0/0/5]port trunk allow-pass vlan 50 70 
[LSW2-GigabitEthernet0/0/5]quit[LSW2]interface Vlanif 50
[LSW2-Vlanif50]ip address 192.168.50.1 24
[LSW2-Vlanif50]dhcp select interface  //为无线客户分配IP地址

AC的配置

<AC6005>system-view 
Enter system view, return user view with Ctrl+Z.
[AC6005]undo info-center enable [AC6005]sysname AC[AC]vlan batch 50 70[AC]interface g0/0/1
[AC-GigabitEthernet0/0/1]port link-type trunk 
[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan 50 70
[AC-GigabitEthernet0/0/1]quit[AC]dhcp enable [AC]interface Vlanif 70
[AC-Vlanif70]ip address 192.168.70.1 24
[AC-Vlanif70]dhcp  select interface 
[AC-Vlanif70]quit[AC-wlan-view]regulatory-domain-profile name x1
[AC-wlan-regulate-domain-x1]country-code CN 
[AC-wlan-regulate-domain-x1]quit[AC-wlan-view]ap-group name x
[AC-wlan-ap-group-x]regulatory-domain-profile x1
Warning: Modifying the country code will clear channel, power and antenna gain c
onfigurations of the radio and reset the AP. Continue?[Y/N]:y[AC]capwap source interface Vlanif 70[AC]wlan 
[AC-wlan-view]ap auth-mode mac-auth 
[AC-wlan-view]ap-id 1 ap-mac 00e0-fc0f-47d0
[AC-wlan-ap-1]ap-name client
[AC-wlan-ap-1]ap-group x
Warning: This operation may cause AP reset. If the country code changes, it willclear channel, power and antenna gain configurations of the radio, Whether to c
ontinue? [Y/N]:y注意：为什么AP拿不到地址，因为STP把e0/0/3阻塞了，所以其它交换机还要创建VLAN70，trunk要允许70通过[AC]wlan 
[AC-wlan-view]security-profile name y1
[AC-wlan-sec-prof-y1]security wpa-wpa2 psk pass-phrase huawei@123 aes
[AC-wlan-sec-prof-y1]quit
[AC-wlan-view]ssid-profile name y2    
[AC-wlan-ssid-prof-y2]ssid hcia
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-ssid-prof-y2]quit
[AC-wlan-view]vap-profile name y
[AC-wlan-vap-prof-y]forward-mode tunnel 
Info: This operation may take a few seconds, please wait.done.
[AC-wlan-vap-prof-y]service-vlan vlan-id 50
[AC-wlan-vap-prof-y]security-profile y1
[AC-wlan-vap-prof-y]ssid-profile y2
[AC-wlan-vap-prof-y]quit
[AC-wlan-view]ap-group name x
[AC-wlan-ap-group-x]vap-profile y wlan 1 radio 0

8、数据中心的搭建

[LSW1]interface Vlanif 60
[LSW1-Vlanif60]ip address 192.168.60.1 24
[LSW1-Vlanif60]quit

9、内网相相互访问

第一步：LSW1与AR1的地址

[LSW1]interface Vlanif 200    
[LSW1-Vlanif200]ip address 10.1.1.1 24
[LSW1-Vlanif200]quit
[LSW1]interface g0/0/5
[LSW1-GigabitEthernet0/0/5]port link-type access 
[LSW1-GigabitEthernet0/0/5]port default vlan 200
[LSW1-GigabitEthernet0/0/5]quit

第二步：路由器的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
Info: Information center is disabled.
[Huawei]sysname R1
[R1]int    
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip address 10.1.1.254 24
[R1-GigabitEthernet0/0/0]quit

第三步：运行OSPF

[R1]ospf router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]quit[LSW1]ospf router-id 2.2.2.2
[LSW1-ospf-1]area 0
[LSW1-ospf-1-area-0.0.0.0]network 192.168.60.0 0.0.0.255
[LSW1-ospf-1-area-0.0.0.0]network 192.168.10.0 0.0.0.255
[LSW1-ospf-1-area-0.0.0.0]network 192.168.20.0 0.0.0.255
[LSW1-ospf-1-area-0.0.0.0]quit[LSW2]ospf router-id 3.3.3.3
[LSW2-ospf-1]area 0
[LSW2-ospf-1-area-0.0.0.0]network 192.168.30.0 0.0.0.255
[LSW2-ospf-1-area-0.0.0.0]network 192.168.40.0 0.0.0.255
[LSW2-ospf-1-area-0.0.0.0]network 192.168.50.0 0.0.0.255

注意：LSW1和LSW2没有直连接口，所以在要LSW2上创建int vlan 10，int vlan 20，并宣告进OSPF

10、拨号上网

第一步：拨号服务器的配置

<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info-center enable 
Info: Information center is disabled.
[Huawei]sysname AR2
[AR2]interface LoopBack 0
[AR2-LoopBack0]ip address 8.8.8.8 24
[AR2-LoopBack0]quit[AR2]ip pool lw
Info: It's successful to create an IP address pool.
[AR2-ip-pool-lw]network 100.1.1.0 mask 24
[AR2-ip-pool-lw]gateway-list 100.1.1.1
[AR2-ip-pool-lw]quit[AR2]aaa
[AR2-aaa]local-user huawei password cipher 1234
[AR2-aaa]local-user huawei service-type ppp[AR2]interface Virtual-Template 1
[AR2-Virtual-Template1]ip address 100.1.1.1 24
[AR2-Virtual-Template1]pp authentication-mode chap 
[AR2-Virtual-Template1]remote address pool lw
[AR2-Virtual-Template1]quit[AR2]interface g0/0/0
[AR2-GigabitEthernet0/0/0]pppoe-server bind virtual-template 1
[AR2-GigabitEthernet0/0/0]quit

第二步：拨号客户端的配置

[R1]interface Dialer 0
[R1-Dialer0]dialer user user1
[R1-Dialer0]dialer bundle 1
[R1-Dialer0]ppp chap user huawei
[R1-Dialer0]ppp chap password cipher 1234
[R1-Dialer0]ip address ppp-negotiate 
[R1-Dialer0]quit
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]pppoe-client dial-bundle-number 1
[R1-GigabitEthernet0/0/1]

注意：要在R1上写一条默认路由、做NAT，在OSPF里面下发默认路由，

更多实验，我将继续更新。

需要实验拓扑练习的朋友，可以关注+点赞后，通过下方方式找我领取（记得备注csdn）。