Zookeeper3.5.7源码分析

2024-01-26 06:04
文章标签 分析 源码 zookeeper3.5

本文主要是介绍Zookeeper3.5.7源码分析，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

文章目录

  • 一、Zookeeper算法一致性
    • 1、Paxos 算法
      • 1.1 概述
      • 1.2 算法流程
      • 1.3 算法缺陷
    • 2、ZAB 协议
      • 2.1 概述
      • 2.2 Zab 协议内容
    • 3、CAP理论
  • 二、源码详解
    • 1、辅助源码
      • 1.1 持久化源码(了解)
      • 1.2 序列化源码
    • 2、ZK 服务端初始化源码解析
      • 2.1 启用脚本分析
      • 2.2 ZK 服务端启动入口
      • 2.3 解析参数 zoo.cfg 和 myid
      • 2.4 过期快照删除
      • 2.5 初始化通信组件
    • 3、ZK 服务端加载数据源码解析
      • 3.1 冷启动数据恢复快照数据
      • 3.2 冷启动数据恢复编辑日志
    • 4、ZK 选举源码解析
      • 4.1 选举准备
      • 4.2 选举执行
    • 5、Follower 和 Leader 状态同步源码
    • 6、服务端启动
      • 6.1 Leader 启动
      • 6.2 Follower 启动
    • 7、客户端启动
      • 7.1 创建 ZookeeperMain
      • 7.2 初始化监听器
      • 7.3 解析连接地址
      • 7.4 创建通信
      • 7.5 执行 run()

一、Zookeeper算法一致性

1、Paxos 算法

1.1 概述

Paxos算法：一种基于消息传递且具有高度容错特性的一致性算法。Paxos算法解决的问题：就是如何快速正确的在一个分布式系统中对某个数据值达成一致，并且保证不论发生任何异常，都不会破坏整个系统的一致性。

在一个Paxos系统中，首先将所有节点划分为Proposer（提议者），Acceptor（接受者），和Learner（学习者）。（注意：每个节点都可以身兼数职），一个完整的Paxos算法流程分为三个阶段：

Prepare准备阶段

  • Proposer向多个Acceptor发出Propose请求Promise（承诺）
  • Acceptor针对收到的Propose请求进行Promise（承诺）

Accept接受阶段

  • Proposer收到多数Acceptor承诺的Promise后，向Acceptor发出Propose请求
  • Acceptor针对收到的Propose请求进行Accept处理

Learn学习阶段：Proposer将形成的决议发送给所有Learners

1.2 算法流程

1.3 算法缺陷

在网络复杂的情况下，一个应用 Paxos 算法的分布式系统，可能很久无法收敛，甚至陷入活锁的情况。造成这种情况的原因是系统中有一个以上的 Proposer，多个Proposers 相互争夺Acceptor，造成迟迟无法达成一致的情况。针对这种情况，一种改进的 Paxos 算法被提出：从系统中选出一个节点作为 Leader，只有 Leader 能够发起提案。这样，一次 Paxos 流程中只有一个Proposer，不会出现活锁的情况

2、ZAB 协议

2.1 概述

Zab 借鉴了 Paxos 算法，是特别为 Zookeeper 设计的支持崩溃恢复的原子广播协议。基于该协议，Zookeeper 设计为只有一台客户端（Leader）负责处理外部的写事务请求，然后Leader 客户端将数据同步到其他 Follower 节点。即 Zookeeper 只有一个 Leader 可以发起提案

2.2 Zab 协议内容

Zab 协议包括两种基本的模式：消息广播、崩溃恢复

3、CAP理论

CAP理论告诉我们，一个分布式系统不可能同时满足以下三种

  • 一致性（C:Consistency）

    在分布式环境中，一致性是指数据在多个副本之间是否能够保持数据一致的特性。在一致性的需求下，当一个系统在数据一致的状态下执行更新操作后，应该保证系统的数据仍然处于一致的状态。

  • 可用性（A:Available）

    可用性是指系统提供的服务必须一直处于可用的状态，对于用户的每一个操作请求总是能够在有限的时间内返回结果

  • 分区容错性（P:Partition Tolerance）

    分布式系统在遇到任何网络分区故障的时候，仍然需要能够保证对外提供满足一致性和可用性的服务，除非是整个网络环境都发生了故障

这三个基本需求，最多只能同时满足其中的两项，因为P是必须的，因此往往选择就在CP或者AP中。ZooKeeper保证的是CP

  • ZooKeeper不能保证每次服务请求的可用性。（注：在极端环境下，ZooKeeper可能会丢弃一些请求，消费者程序需要重新请求才能获得结果）。所以说，ZooKeeper不能保证服务可用性。
  • 进行Leader选举时集群都是不可用

二、源码详解

Zookeeper源码下载地址：https://archive.apache.org/dist/zookeeper/zookeeper-3.5.7/

1、辅助源码

1.1 持久化源码(了解)

Leader 和 Follower 中的数据会在内存和磁盘中各保存一份。所以需要将内存中的数据持久化到磁盘中，在 org.apache.zookeeper.server.persistence 包下的相关类都是序列化相关的代码

public interface SnapShot {// 反序列化方法long deserialize(DataTree dt, Map<Long, Integer> sessions)throws IOException;// 序列化方法void serialize(DataTree dt, Map<Long, Integer> sessions,File name) throws IOException;/***find the most recent snapshot file*查找最近的快照文件*/File findMostRecentSnapshot() throws IOException;// 释放资源void close() throws IOException;
}public interface TxnLog {// 设置服务状态void setServerStats(ServerStats serverStats);// 滚动日志void rollLog() throws IOException;// 追 加boolean append(TxnHeader hdr, Record r) throws IOException;// 读取数据TxnIterator read(long zxid) throws IOException;// 获取最后一个 zxidlong getLastLoggedZxid() throws IOException;// 删除日志boolean truncate(long zxid) throws IOException;// 获 取 DbIdlong getDbId() throws IOException;// 提 交void commit() throws IOException;// 日志同步时间long getTxnLogSyncElapsedTime();// 关闭日志void close() throws IOException;// 读取日志的接口public interface TxnIterator {// 获取头信息TxnHeader getHeader();// 获取传输的内容Record getTxn();// 下一条记录boolean next() throws IOException;// 关闭资源void close() throws IOException;// 获取存储的大小long getStorageSize() throws IOException;}
}

1.2 序列化源码

zookeeper-jute 代码是关于Zookeeper 序列化相关源码

2、ZK 服务端初始化源码解析

2.1 启用脚本分析

zkServer.sh start 底层的实际执行内容，所以程序的入口是 QuorumPeerMain.java 类

nohup "$JAVA" 
+ 一堆提交参数
+ $ZOOMAIN(org.apache.zookeeper.server.quorum.QuorumPeerMain)
+ "$ZOOCFG"(zkEnv.sh 文件中 ZOOCFG="zoo.cfg")

2.2 ZK 服务端启动入口

源码里查找QuorumPeerMain类

public static void main(String[] args) {// 创建了一个 zk 节点QuorumPeerMain main = new QuorumPeerMain();try {// 初始化节点并运行，args 相当于提交参数中的 zoo.cfgmain.initializeAndRun(args);} catch (IllegalArgumentException e) {... ...}LOG.info("Exiting normally"); System.exit(0);
}protected void initializeAndRun(String[] args)
throws ConfigException, IOException, AdminServerException{// 管理 zk 的配置信息QuorumPeerConfig config = new QuorumPeerConfig();if (args.length == 1) {// 1 解析参数，zoo.cfg 和 myidconfig.parse(args[0]);}// 2 启动定时任务，对过期的快照，执行删除（默认该功能关闭）// Start and schedule the the purge taskDatadirCleanupManager purgeMgr = new DatadirCleanupManager(config.getDataDir(), config.getDataLogDir(), config.getSnapRetainCount(), config.getPurgeInterval()); purgeMgr.start();if (args.length == 1 && config.isDistributed()) {// 3 启动集群runFromConfig(config);} else {LOG.warn("Either no config or no quorum defined in config, running "+ " in standalone mode");// there is only server in the quorum -- run as standalone ZooKeeperServerMain.main(args);}
}

2.3 解析参数 zoo.cfg 和 myid

public void parse(String path) throws ConfigException {LOG.info("Reading configuration from: " + path);try {// 校验文件路径及是否存在File configFile = (new VerifyingFileFactory.Builder(LOG).warnForRelativePath().failForNonExistingPath().build()).create(path);Properties cfg = new Properties();FileInputStream in = new FileInputStream(configFile); // 加载配置文件cfg.load(in);configFileStr = path;} finally {in.close();}// 解析配置文件parseProperties(cfg);} catch (IOException e) {throw new ConfigException("Error processing " + path, e);} catch (IllegalArgumentException e) {throw new ConfigException("Error processing " + path, e);}... ...
}// parseProperties(cfg)方法拉到最下面setupQuorumPeerConfigvoid setupQuorumPeerConfig(Properties prop, boolean configBackwardCompatibilityMode)throws IOException, ConfigException {quorumVerifier = parseDynamicConfig(prop, electionAlg, true, configBackwardCompatibilityMode);setupMyId();setupClientPort();setupPeerType();checkValidity();
}private void setupMyId() throws IOException {File myIdFile = new File(dataDir, "myid");// standalone server doesn't need myid file.if (!myIdFile.isFile()) {return;}BufferedReader br = new BufferedReader(new FileReader(myIdFile));String myIdString;try {myIdString = br.readLine();} finally {br.close();}try {// 将解析 myid 文件中的 id 赋值给 serverIdserverId = Long.parseLong(myIdString);MDC.put("myid", myIdString);} catch (NumberFormatException e) {throw new IllegalArgumentException("serverid " + myIdString+ " is not a number");}
}

2.4 过期快照删除

可以启动定时任务，对过期的快照，执行删除。默认该功能时关闭的

// 2 启动定时任务，对过期的快照，执行删除（默认是关闭）
// config.getSnapRetainCount() = 3 最少保留的快照个数
// config.getPurgeInterval() = 0  默认 0 表示关闭
DatadirCleanupManager purgeMgr = new DatadirCleanupManager(config.getDataDir(), config.getDataLogDir(), config.getSnapRetainCount(), config.getPurgeInterval());
purgeMgr.start();public void start() {if (PurgeTaskStatus.STARTED == purgeTaskStatus) { LOG.warn("Purge task is already running."); return;}// 默认情况 purgeInterval=0，该任务关闭，直接返回// Don't schedule the purge task with zero or negative purge interval.if (purgeInterval <= 0) {LOG.info("Purge task is not scheduled."); return;}// 创建一个定时器timer = new Timer("PurgeTask", true);// 创建一个清理快照任务TimerTask task = new PurgeTask(dataLogDir, snapDir, snapRetainCount);// 如果 purgeInterval 设置的值是 1，表示 1 小时检查一次，判断是否有过期快照， 有则删除timer.scheduleAtFixedRate(task, 0, TimeUnit.HOURS.toMillis(purgeInterval));purgeTaskStatus = PurgeTaskStatus.STARTED;
}static class PurgeTask extends TimerTask { private File logsDir;private File snapsDir; private int snapRetainCount;public PurgeTask(File dataDir, File snapDir, int count) { logsDir = dataDir;snapsDir = snapDir; snapRetainCount = count;
}@Overridepublic void run() {LOG.info("Purge task started."); try {// 清理过期的数据PurgeTxnLog.purge(logsDir, snapsDir, snapRetainCount);} catch (Exception e) {LOG.error("Error occurred while purging.", e);}LOG.info("Purge task completed.");}
}public static void purge(File dataDir, File snapDir, int num) throws IOException { if (num < 3) {throw new IllegalArgumentException(COUNT_ERR_MSG);}FileTxnSnapLog txnLog = new FileTxnSnapLog(dataDir, snapDir); List<File> snaps = txnLog.findNRecentSnapshots(num);int numSnaps = snaps.size(); if (numSnaps > 0) {purgeOlderSnapshots(txnLog, snaps.get(numSnaps - 1));}
}

2.5 初始化通信组件

if (args.length == 1 && config.isDistributed()) {runFromConfig(config);
} else {LOG.warn("Either no config or no quorum defined in config, running "+ " in standalone mode");// there is only server in the quorum -- run as standaloneZooKeeperServerMain.main(args);
}// 通信协议默认 NIO
public void runFromConfig(QuorumPeerConfig config)throws IOException, AdminServerException{
......
LOG.info("Starting quorum peer");
try {ServerCnxnFactory cnxnFactory = null;ServerCnxnFactory secureCnxnFactory = null;// 通信组件初始化，默认是 NIO 通信if (config.getClientPortAddress() != null) {// zookeeperAdmin.md 文件中//Default is `NIOServerCnxnFactorycnxnFactory = ServerCnxnFactory.createFactory();cnxnFactory.configure(config.getClientPortAddress(),config.getMaxClientCnxns(), false);}if (config.getSecureClientPortAddress() != null) {secureCnxnFactory = ServerCnxnFactory.createFactory();secureCnxnFactory.configure(config.getSecureClientPortAddress(),config.getMaxClientCnxns(), true);}// 把解析的参数赋值给该 zookeeper 节点quorumPeer = getQuorumPeer();quorumPeer.setTxnFactory(new FileTxnSnapLog(config.getDataLogDir(),config.getDataDir()));quorumPeer.enableLocalSessions(config.areLocalSessionsEnabled());quorumPeer.enableLocalSessionsUpgrading(config.isLocalSessionsUpgradingEnabled());//quorumPeer.setQuorumPeers(config.getAllMembers());quorumPeer.setElectionType(config.getElectionAlg());quorumPeer.setMyid(config.getServerId());quorumPeer.setTickTime(config.getTickTime());quorumPeer.setMinSessionTimeout(config.getMinSessionTimeout());quorumPeer.setMaxSessionTimeout(config.getMaxSessionTimeout());quorumPeer.setInitLimit(config.getInitLimit());quorumPeer.setSyncLimit(config.getSyncLimit());quorumPeer.setConfigFileName(config.getConfigFilename());// 管理 zk 数据的存储quorumPeer.setZKDatabase(new ZKDatabase(quorumPeer.getTxnFactory()));quorumPeer.setQuorumVerifier(config.getQuorumVerifier(), false);if (config.getLastSeenQuorumVerifier()!=null) {quorumPeer.setLastSeenQuorumVerifier(config.getLastSeenQuorumVerifier(),false);}quorumPeer.initConfigInZKDatabase();// 管理 zk 的通信quorumPeer.setCnxnFactory(cnxnFactory);quorumPeer.setSecureCnxnFactory(secureCnxnFactory);quorumPeer.setSslQuorum(config.isSslQuorum());quorumPeer.setUsePortUnification(config.shouldUsePortUnification());quorumPeer.setLearnerType(config.getPeerType());quorumPeer.setSyncEnabled(config.getSyncEnabled());quorumPeer.setQuorumListenOnAllIPs(config.getQuorumListenOnAllIPs());if (config.sslQuorumReloadCertFiles) {quorumPeer.getX509Util().enableCertFileReloading();}......quorumPeer.setQuorumCnxnThreadsSize(config.quorumCnxnThreadsSize);quorumPeer.initialize();// 启动 zkquorumPeer.start();quorumPeer.join();} catch (InterruptedException e) {// warn, but generally this is okLOG.warn("Quorum Peer interrupted", e);}
}

初始化 NIO 服务端 Socket（并未启动）,ctrl + alt +B 查找 configure 实现类，NIOServerCnxnFactory.java

@Override
public void configure(InetSocketAddress addr, int maxcc, boolean secure) throws IOException {......// 初始化 NIO 服务端 socket，绑定 2181 端口，可以接收客户端请求this.ss = ServerSocketChannel.open();ss.socket().setReuseAddress(true);LOG.info("binding to port " + addr);// 绑定 2181 端口ss.socket().bind(addr);ss.configureBlocking(false);acceptThread = new AcceptThread(ss, addr, selectorThreads);
}

3、ZK 服务端加载数据源码解析

3.1 冷启动数据恢复快照数据

public synchronized void start() {if (!getView().containsKey(myid)) {throw new RuntimeException("My id " + myid + " not in the peer list");}// 冷启动数据恢复loadDataBase();startServerCnxnFactory(); try {// 启动通信工厂实例对象adminServer.start();} catch (AdminServerException e) { LOG.warn("Problem starting AdminServer", e); System.out.println(e);}// 准备选举环境startLeaderElection();//  执行选举super.start();
}private void loadDataBase() {try {// 加载磁盘数据到内存，恢复 DataTree// zk 的操作分两种：事务操作和非事务操作// 事务操作：zk.cteate()；都会被分配一个全局唯一的 zxid，zxid 组成：64 位：（前 32 位：epoch 每个 leader 任期的代号；后 32 位：txid 为事务 id）// 非事务操作：zk.getData()zkDb.loadDataBase();// load the epochslong lastProcessedZxid = zkDb.getDataTree().lastProcessedZxid;long epochOfZxid = ZxidUtils.getEpochFromZxid(lastProcessedZxid);......
}public long restore(DataTree dt, Map<Long, Integer> sessions,PlayBackListener listener) throws IOException {// 恢复快照文件数据到 DataTreelong deserializeResult = snapLog.deserialize(dt, sessions);FileTxnLog txnLog = new FileTxnLog(dataDir);RestoreFinalizer finalizer = () -> {// 恢复编辑日志数据到 DataTreelong highestZxid = fastForwardFromEdits(dt, sessions, listener);return highestZxid;......
}//ctrl + alt +B 查找 deserialize 实现类 FileSnap.java
public long deserialize(DataTree dt, Map<Long, Integer> sessions)throws IOException {......// 依次遍历每一个快照的数据for (int i = 0, snapListSize = snapList.size(); i < snapListSize; i++) {snap = snapList.get(i);LOG.info("Reading snapshot " + snap);// 反序列化环境准备try (InputStream snapIS = new BufferedInputStream(new FileInputStream(snap));CheckedInputStream crcIn = new CheckedInputStream(snapIS, new Adler32())) {InputArchive ia = BinaryInputArchive.getArchive(crcIn);// 反序列化，恢复数据到 DataTreedeserialize(dt, sessions, ia);......
}public void deserialize(DataTree dt, Map<Long, Integer> sessions,InputArchive ia) throws IOException {FileHeader header = new FileHeader();header.deserialize(ia, "fileheader");if (header.getMagic() != SNAP_MAGIC) {throw new IOException("mismatching magic headers "+ header.getMagic() +" !=  " + FileSnap.SNAP_MAGIC);}// 恢复快照数据到 DataTreeSerializeUtils.deserializeSnapshot(dt,ia,sessions);
}public static void deserializeSnapshot(DataTree dt,InputArchive ia,Map<Long, Integer> sessions) throws IOException {int count = ia.readInt("count");while (count > 0) {long id = ia.readLong("id");int to = ia.readInt("timeout");sessions.put(id, to);if (LOG.isTraceEnabled()) {ZooTrace.logTraceMessage(LOG, ZooTrace.SESSION_TRACE_MASK,"loadData --- session in archive: " + id+ " with timeout: " + to);}count--;}// 恢复快照数据到 DataTreedt.deserialize(ia, "tree");
}public void deserialize(InputArchive ia, String tag) throws IOException {aclCache.deserialize(ia);nodes.clear();pTrie.clear();String path = ia.readString("path");// 从快照中恢复每一个 datanode 节点数据到 DataTreewhile (!"/".equals(path)) {// 每次循环创建一个节点对象  DataNode node = new DataNode();ia.readRecord(node, "node");// 将 DataNode 恢复到 DataTreenodes.put(path, node);synchronized (node) {aclCache.addUsage(node.acl);}int lastSlash = path.lastIndexOf('/');if (lastSlash == -1) {root = node;} else {// 处理父节点String parentPath = path.substring(0, lastSlash);DataNode parent = nodes.get(parentPath);if (parent == null) {throw new IOException("Invalid Datatree, unable to find " +"parent " + parentPath + " of path " + path);}// 处理子节点parent.addChild(path.substring(lastSlash + 1));// 处理临时节点和永久节点long eowner = node.stat.getEphemeralOwner();EphemeralType ephemeralType = EphemeralType.get(eowner);if (ephemeralType == EphemeralType.CONTAINER) {containers.add(path);} else if (ephemeralType == EphemeralType.TTL) {ttls.add(path);} else if (eowner != 0) {HashSet<String> list = ephemerals.get(eowner);if (list == null) {list = new HashSet<String>();ephemerals.put(eowner, list);}list.add(path);}}path = ia.readString("path");}nodes.put("/", root);// we are done with deserializing the// the datatree// update the quotas - create path trie// and also update the stat nodessetupQuota();aclCache.purgeUnused();
}

3.2 冷启动数据恢复编辑日志

回到 FileTxnSnapLog.java 类中的 restore 方法

public long restore(DataTree dt, Map<Long, Integer> sessions,PlayBackListener listener) throws IOException {// 恢复快照文件数据到 DataTreelong deserializeResult = snapLog.deserialize(dt, sessions);FileTxnLog txnLog = new FileTxnLog(dataDir);RestoreFinalizer finalizer = () -> {// 恢复编辑日志数据到 DataTreelong highestZxid = fastForwardFromEdits(dt, sessions, listener);return highestZxid;};......
}public long fastForwardFromEdits(DataTree dt, Map<Long, Integer> sessions,PlayBackListener listener) throws IOException {// 在此之前，已经从快照文件中恢复了大部分数据，接下来只需从快照的 zxid + 1位置开始恢复TxnIterator itr = txnLog.read(dt.lastProcessedZxid+1);// 快照中最大的 zxid，在执行编辑日志时，这个值会不断更新，直到所有操作执行完long highestZxid = dt.lastProcessedZxid;TxnHeader hdr;try {// 从 lastProcessedZxid 事务编号器开始，不断的从编辑日志中恢复剩下的还没有恢复的数据while (true) {// 获取事务头信息（有 zxid）hdr = itr.getHeader();if (hdr == null) {//empty logsreturn dt.lastProcessedZxid;}if (hdr.getZxid() < highestZxid && highestZxid != 0) {LOG.error("{}(highestZxid) > {}(next log) for type {}",highestZxid, hdr.getZxid(), hdr.getType());} else {highestZxid = hdr.getZxid();}try {// 根据编辑日志恢复数据到 DataTree，每执行一次，对应的事务 id，highestZxid + 1processTransaction(hdr,dt,sessions, itr.getTxn());} catch(KeeperException.NoNodeException e) {throw new IOException("Failed to process transaction type: " +hdr.getType() + " error: " + e.getMessage(), e);}listener.onTxnLoaded(hdr, itr.getTxn());if (!itr.next())break;}} finally {if (itr != null) {itr.close();}}return highestZxid;
}

4、ZK 选举源码解析

选举流程可以参考之前的zookeeper基础学习

4.1 选举准备

@Override
public synchronized void start() {if (!getView().containsKey(myid)) {throw new RuntimeException("My id " + myid + " not in the peer list");}loadDataBase();startServerCnxnFactory();try {adminServer.start();} catch (AdminServerException e) {LOG.warn("Problem starting AdminServer", e);System.out.println(e);}// 选举准备startLeaderElection();super.start();
}synchronized public void startLeaderElection() {try {if (getPeerState() == ServerState.LOOKING) {// 创建选票// （1）选票组件：epoch（leader 的任期代号）、zxid（某个 leader 当选期间执行的事务编号）、myid（serverid）// （2）开始选票时，都是先投自己currentVote = new Vote(myid, getLastLoggedZxid(), getCurrentEpoch());}......// 创建选举算法实例this.electionAlg = createElectionAlgorithm(electionType);
}protected Election createElectionAlgorithm(int electionAlgorithm){Election le=null;......case 3:// 1 创建 QuorumCnxnManager，负责选举过程中的所有网络通信QuorumCnxManager qcm = createCnxnManager();QuorumCnxManager oldQcm = qcmRef.getAndSet(qcm);if (oldQcm != null) {LOG.warn("Clobbering already-set QuorumCnxManager (restarting leader election?)");oldQcm.halt();}QuorumCnxManager.Listener listener = qcm.listener;if(listener != null){// 2 启动监听线程listener.start();// 3 准备开始选举FastLeaderElection fle = new FastLeaderElection(this, qcm);fle.start();le = fle;} else {LOG.error("Null listener when initializing cnx manager");}......
}// 网络通信组件初始化
public QuorumCnxManager createCnxnManager() {return new QuorumCnxManager(this,this.getId(),this.getView(),this.authServer,this.authLearner,this.tickTime * this.syncLimit,this.getQuorumListenOnAllIPs(),this.quorumCnxnThreadsSize,this.isQuorumSaslAuthEnabled());
}public QuorumCnxManager(QuorumPeer self,final long mySid,Map<Long,QuorumPeer.QuorumServer> view,QuorumAuthServer authServer,QuorumAuthLearner authLearner,int socketTimeout,boolean listenOnAllIPs,int quorumCnxnThreadsSize,boolean quorumSaslAuthEnabled) {// 创建各种队列this.recvQueue = new ArrayBlockingQueue<Message>(RECV_CAPACITY);this.queueSendMap = new ConcurrentHashMap<Long, ArrayBlockingQueue<ByteBuffer>>();this.senderWorkerMap = new ConcurrentHashMap<Long, SendWorker>();this.lastMessageSent = new ConcurrentHashMap<Long, ByteBuffer>();String cnxToValue = System.getProperty("zookeeper.cnxTimeout");if(cnxToValue != null){this.cnxTO = Integer.parseInt(cnxToValue);}this.self = self;this.mySid = mySid;this.socketTimeout = socketTimeout;this.view = view;this.listenOnAllIPs = listenOnAllIPs;initializeAuth(mySid, authServer, authLearner, quorumCnxnThreadsSize,quorumSaslAuthEnabled);// Starts listener thread that waits for connection requestslistener = new Listener();listener.setName("QuorumPeerListener");
}

监听线程初始化，点击 QuorumCnxManager.Listener，找到对应的 run 方法

@Override
public void run() {......LOG.info("My election bind port: " + addr.toString());setName(addr.toString());// 绑定服务器地址ss.bind(addr);// 死循环while (!shutdown) {try {// 阻塞，等待处理请求client = ss.accept();......
}

选举准备，点击 FastLeaderElection

public FastLeaderElection(QuorumPeer self, QuorumCnxManager manager){ this.stop = false;this.manager = manager;starter(self, manager);
}private void starter(QuorumPeer self, QuorumCnxManager manager) { this.self = self;proposedLeader = -1;proposedZxid = -1;// 初始化队列和信息sendqueue = new LinkedBlockingQueue<ToSend>();recvqueue = new LinkedBlockingQueue<Notification>(); this.messenger = new Messenger(manager);
}

4.2 选举执行

QuorumPeer.java中执行 super.start();就相当于执行 QuorumPeer.java 类中的 run()方法。当 Zookeeper 启动后，首先都是 Looking 状态，通过选举，让其中一台服务器成为 Leader，其他的服务器成为 Follower。

@Override
public void run() {......while (running) {switch (getPeerState()) {case LOOKING:LOG.info("LOOKING");......// 进行选举，选举结束，返回最终成为 Leader 胜选的那张选票setCurrentVote(makeLEStrategy().lookForLeader());......case FOLLOWING:try {LOG.info("FOLLOWING");setFollower(makeFollower(logFactory));follower.followLeader();} catch (Exception e) {LOG.warn("Unexpected exception",e);} finally {follower.shutdown();setFollower(null);updateServerState();}break;case LEADING:LOG.info("LEADING");try {setLeader(makeLeader(logFactory));leader.lead();setLeader(null);} catch (Exception e) {LOG.warn("Unexpected exception",e);} finally {if (leader != null) {leader.shutdown("Forcing shutdown");setLeader(null);}updateServerState();}break;}start_fle = Time.currentElapsedTime();}} finally {......
}

ctrl+alt+b 点击 lookForLeader()的实现类 FastLeaderElection.java

public Vote lookForLeader() throws InterruptedException {......try {// 正常启动中，所有其他服务器，都会给我发送一个投票// 保存每一个服务器的最新合法有效的投票HashMap<Long, Vote> recvset = new HashMap<Long, Vote>();// 存储合法选举之外的投票结果HashMap<Long, Vote> outofelection = new HashMap<Long, Vote>();// 一次选举的最大等待时间，默认值是 0.2sint notTimeout = finalizeWait;// 每发起一轮选举，logicalclock++// 在没有合法的 epoch 数据之前，都使用逻辑时钟代替// 选举 leader 的规则：依次比较 epoch（任期） zxid（事务 id） serverid（myid） 谁大谁当选 leadersynchronized(this){// 更新逻辑时钟，每进行一次选举，都需要更新逻辑时钟logicalclock.incrementAndGet();// 更新选票（serverid， zxid, epoch）updateProposal(getInitId(), getInitLastLoggedZxid(), getPeerEpoch());}LOG.info("New election. My id =  " + self.getId() +", proposed zxid=0x" + Long.toHexString(proposedZxid));// 广播选票，把自己的选票发给其他服务器sendNotifications();/** Loop in which we exchange notifications until we find a leader*/// 一轮一轮的选举直到选举成功while ((self.getPeerState() == ServerState.LOOKING) &&(!stop)){......
}

点击 sendNotifications，广播选票，把自己的选票发给其他服务器

private void sendNotifications() {// 遍历投票参与者，给每台服务器发送选票for (long sid : self.getCurrentAndNextConfigVoters()) {QuorumVerifier qv = self.getQuorumVerifier();// 创建发送选票ToSend notmsg = new ToSend(ToSend.mType.notification,proposedLeader,proposedZxid,logicalclock.get(),QuorumPeer.ServerState.LOOKING,sid,proposedEpoch, qv.toString().getBytes());if(LOG.isDebugEnabled()){LOG.debug("Sending Notification: " + proposedLeader + " (n.leader), 0x"  +Long.toHexString(proposedZxid) + " (n.zxid), 0x" + Long.toHexString(logicalclock.get())  +" (n.round), " + sid + " (recipient), " + self.getId() +" (myid), 0x" + Long.toHexString(proposedEpoch) + " (n.peerEpoch)");}// 把发送选票放入发送队列sendqueue.offer(notmsg);}
}

在 FastLeaderElection.java 类中查找 WorkerSender 线程

class WorkerSender extends ZooKeeperThread {......public void run() {while (!stop) {try {// 队列阻塞，时刻准备接收要发送的选票ToSend m = sendqueue.poll(3000, TimeUnit.MILLISECONDS);if(m == null) continue;// 处理要发送的选票process(m);} catch (InterruptedException e) {break;}}LOG.info("WorkerSender is down");}/*** Called by run() once there is a new message to send.** @param m     message to send*/void process(ToSend m) {ByteBuffer requestBuffer = buildMsg(m.state.ordinal(),m.leader,m.zxid,m.electionEpoch,m.peerEpoch,m.configData);// 发送选票manager.toSend(m.sid, requestBuffer);}
}public void toSend(Long sid, ByteBuffer b) { // 判断如果是发给自己的消息，直接进入自己的 RecvQueueif (this.mySid == sid) {b.position(0);addToRecvQueue(new Message(b.duplicate(), sid));} else {// 如果是发给其他服务器，创建对应的发送队列或者获取已经存在的发送队列// ，并把要发送的消息放入该队列ArrayBlockingQueue<ByteBuffer> bq = new ArrayBlockingQueue<ByteBuffer>(SEND_CAPACITY);ArrayBlockingQueue<ByteBuffer> oldq = queueSendMap.putIfAbsent(sid, bq);if (oldq != null) {addToSendQueue(oldq, b);} else {addToSendQueue(bq, b);}// 将选票发送出去connectOne(sid);}
}

与要发送的服务器节点建立通信连接，创建并启动发送器线程和接收器线程

//connectOne->connectOne->initiateConnection->startConnection
private boolean startConnection(Socket sock, Long sid)throws IOException {DataOutputStream dout = null;DataInputStream din = null;try {// 通过输出流，向服务器发送数据BufferedOutputStream buf = new BufferedOutputStream(sock.getOutputStream());dout = new DataOutputStream(buf);// Sending id and challenge// represents protocol version (in other words - message type)dout.writeLong(PROTOCOL_VERSION);dout.writeLong(self.getId());String addr = formatInetAddr(self.getElectionAddress());byte[] addr_bytes = addr.getBytes();dout.writeInt(addr_bytes.length);dout.write(addr_bytes);dout.flush();// 通过输入流读取对方发送过来的选票din = new DataInputStream(new BufferedInputStream(sock.getInputStream()));} catch (IOException e) {LOG.warn("Ignoring exception reading or writing challenge: ", e);closeSocket(sock);return false;}// authenticate learnerQuorumPeer.QuorumServer qps = self.getVotingView().get(sid);if (qps != null) {// TODO - investigate why reconfig makes qps null.authLearner.authenticate(sock, qps.hostname);}// 如果对方的 id 比我的大，我是没有资格给对方发送连接请求的，直接关闭自己的客户端if (sid > self.getId()) {LOG.info("Have smaller server identifier, so dropping the " +"connection: (" + sid + ", " + self.getId() + ")");closeSocket(sock);// Otherwise proceed with the connection} else {// 初始化，发送器 和 接收器SendWorker sw = new SendWorker(sock, sid);RecvWorker rw = new RecvWorker(sock, din, sid, sw);sw.setRecv(rw);SendWorker vsw = senderWorkerMap.get(sid);if(vsw != null)vsw.finish();senderWorkerMap.put(sid, sw);queueSendMap.putIfAbsent(sid, new ArrayBlockingQueue<ByteBuffer>(SEND_CAPACITY));// 启动发送器线程和接收器线程sw.start();rw.start();return true;}return false;
}

点击 SendWorker，并查找该类下的 run 方法；点击 RecvWorker，并查找该类下的 run 方法(这里不举例了)，在 FastLeaderElection.java 类中查找 WorkerReceiver 线程

public void run() {Message response;while (!stop) {// Sleeps on receivetry {// 从 RecvQueue 中取出选举投票消息（其他服务器发送过来的）response = manager.pollRecvQueue(3000, TimeUnit.MILLISECONDS);......} catch (InterruptedException e) {......
}

5、Follower 和 Leader 状态同步源码

当选举结束后，每个节点都需要根据自己的角色更新自己的状态。选举出的 Leader 更新自己状态为Leader，其他节点更新自己状态为 Follower。Leader 更新状态入口：leader.lead()；Follower 更新状态入口：follower.followerLeader() 注意：

  • follower 必须要让 leader 知道自己的状态：epoch、zxid、sid 必须要找出谁是leader；发起请求连接 leader；发送自己的信息给leader；leader 接收到信息，必须要返回对应的信息给 follower
  • 当leader 得知follower 的状态了，就确定需要做何种方式的数据同步DIFF、TRUNC、SNAP
  • 执行数据同步
  • 当 leader 接收到超过半数 follower 的 ack 之后，进入正常工作状态，集群启动完成了

最终总结同步的方式：

  • DIFF 咱两一样，不需要做什么
  • TRUNC follower 的 zxid 比 leader 的 zxid 大，所以 Follower 要回滚
  • COMMIT leader 的zxid 比 follower 的 zxid 大，发送 Proposal 给 foloower 提交执行
  • 如果 follower 并没有任何数据，直接使用 SNAP 的方式来执行数据同步（直接把数据全部序列到follower）

6、服务端启动

6.1 Leader 启动

ZooKeeperServer全局查找 Leader，然后 ctrl + f 查找 lead()

void lead() throws IOException, InterruptedException {... ...// 启动 zookeeper 服务startZkServer();... ...
}private synchronized void startZkServer() {......// 启动 zookeeper 服务zk.startup();......
}//LeaderZooKeeperServer.java->super.startup();//ZookeeperServer.java
public synchronized void startup() {if (sessionTracker == null) {createSessionTracker();}startSessionTracker();// 接受请求相关处理setupRequestProcessors();registerJMX();setState(State.RUNNING);notifyAll();
}protected void setupRequestProcessors() {RequestProcessor finalProcessor = new FinalRequestProcessor(this);RequestProcessor syncProcessor = new SyncRequestProcessor(this,finalProcessor);((SyncRequestProcessor)syncProcessor).start();firstProcessor = new PrepRequestProcessor(this, syncProcessor);((PrepRequestProcessor)firstProcessor).start();
}//点击 PrepRequestProcessor，并查找它的 run 方法

6.2 Follower 启动

FollowerZooKeeperServer全局查找 Follower，然后 ctrl + f 查找 followLeader()

void followLeader() throws InterruptedException {
......while (this.isRunning()) {readPacket(qp);processPacket(qp);}
......
}void readPacket(QuorumPacket pp) throws IOException {synchronized (leaderIs) {leaderIs.readRecord(pp, "packet");}if (LOG.isTraceEnabled()) {final long traceMask =(pp.getType() == Leader.PING) ? ZooTrace.SERVER_PING_TRACE_MASK: ZooTrace.SERVER_PACKET_TRACE_MASK;ZooTrace.logQuorumPacket(LOG, traceMask, 'i', pp);}
}protected void processPacket(QuorumPacket qp) throws Exception{switch (qp.getType()) {case Leader.PING:            ping(qp);            break;case Leader.PROPOSAL:           TxnHeader hdr = new TxnHeader();Record txn = SerializeUtils.deserializeTxn(qp.getData(), hdr);if (hdr.getZxid() != lastQueued + 1) {LOG.warn("Got zxid 0x"+ Long.toHexString(hdr.getZxid())+ " expected 0x"+ Long.toHexString(lastQueued + 1));}lastQueued = hdr.getZxid();if (hdr.getType() == OpCode.reconfig){SetDataTxn setDataTxn = (SetDataTxn) txn;       QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));self.setLastSeenQuorumVerifier(qv, true);                               }fzk.logRequest(hdr, txn);break;case Leader.COMMIT:fzk.commit(qp.getZxid());break;case Leader.COMMITANDACTIVATE:// get the new configuration from the requestRequest request = fzk.pendingTxns.element();SetDataTxn setDataTxn = (SetDataTxn) request.getTxn();                                                                                                      QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));                                // get new designated leader from (current) leader's messageByteBuffer buffer = ByteBuffer.wrap(qp.getData());    long suggestedLeaderId = buffer.getLong();boolean majorChange = self.processReconfig(qv, suggestedLeaderId, qp.getZxid(), true);// commit (writes the new config to ZK tree (/zookeeper/config)                     fzk.commit(qp.getZxid());if (majorChange) {throw new Exception("changes proposed in reconfig");}break;case Leader.UPTODATE:LOG.error("Received an UPTODATE message after Follower started");break;case Leader.REVALIDATE:revalidate(qp);break;case Leader.SYNC:fzk.sync();break;default:LOG.warn("Unknown packet type: {}", LearnerHandler.packetToString(qp));break;}
}

7、客户端启动

在 ZkCli.sh 启动 Zookeeper 时，会调用 ZooKeeperMain.java，查找 ZooKeeperMain，找到程序的入口 main()方法

public static void main(String args[]) throws CliException, IOException, InterruptedException{ZooKeeperMain main = new ZooKeeperMain(args);main.run();
}

7.1 创建 ZookeeperMain

public ZooKeeperMain(String args[]) throws IOException, InterruptedException {cl.parseOptions(args);System.out.println("Connecting to " + cl.getOption("server"));connectToZK(cl.getOption("server"));
}protected void connectToZK(String newHost) throws InterruptedException, IOException {if (zk != null && zk.getState().isAlive()) {zk.close();}host = newHost;boolean readOnly = cl.getOption("readonly") != null;if (cl.getOption("secure") != null) {System.setProperty(ZKClientConfig.SECURE_CLIENT, "true");System.out.println("Secure connection is enabled");}zk = new ZooKeeperAdmin(host, Integer.parseInt(cl.getOption("timeout")), new MyWatcher(), readOnly);
}

7.2 初始化监听器

ZooKeeperAdmin一直点进去

public ZooKeeper(String connectString, int sessionTimeout, Watcher watcher,boolean canBeReadOnly, HostProvider aHostProvider,ZKClientConfig clientConfig) throws IOException {LOG.info("Initiating client connection, connectString=" + connectString+ " sessionTimeout=" + sessionTimeout + " watcher=" + watcher);if (clientConfig == null) {clientConfig = new ZKClientConfig();}this.clientConfig = clientConfig;watchManager = defaultWatchManager();// 赋值 watcher 给默认的 defaultWatcherwatchManager.defaultWatcher = watcher;ConnectStringParser connectStringParser = new ConnectStringParser(connectString);hostProvider = aHostProvider;// 客户端与服务器端通信的终端cnxn = createConnection(connectStringParser.getChrootPath(),hostProvider, sessionTimeout, this, watchManager,getClientCnxnSocket(), canBeReadOnly);cnxn.start();
}

7.3 解析连接地址

public ConnectStringParser(String connectString) {// parse out chroot, if anyint off = connectString.indexOf('/');if (off >= 0) {String chrootPath = connectString.substring(off);// ignore "/" chroot spec, same as nullif (chrootPath.length() == 1) {this.chrootPath = null;} else {PathUtils.validatePath(chrootPath);this.chrootPath = chrootPath;}connectString = connectString.substring(0, off);} else {this.chrootPath = null;}// "hadoop102:2181,hadoop103:2181,hadoop104:2181"用逗号切割List<String> hostsList = split(connectString,",");for (String host : hostsList) {int port = DEFAULT_PORT;int pidx = host.lastIndexOf(':');if (pidx >= 0) {// otherwise : is at the end of the string, ignoreif (pidx < host.length() - 1) {port = Integer.parseInt(host.substring(pidx + 1));}host = host.substring(0, pidx);}serverAddresses.add(InetSocketAddress.createUnresolved(host, port));}
}public class InetSocketAddress extends SocketAddress{// Private implementation class pointed to by all public methods.private static class InetSocketAddressHolder {// The hostname of the Socket Address 主机名称private String hostname;// The IP address of the Socket Address 通信地址private InetAddress addr;// The port number of the Socket Address 端口号private int port;... ...}... ...
}

7.4 创建通信

public ZooKeeper(String connectString, int sessionTimeout, Watcher watcher,boolean canBeReadOnly, HostProvider aHostProvider,ZKClientConfig clientConfig) throws IOException {......// 客户端与服务器端通信的终端cnxn = createConnection(connectStringParser.getChrootPath(),hostProvider, sessionTimeout, this, watchManager,getClientCnxnSocket(), canBeReadOnly);cnxn.start();
}protected ClientCnxn createConnection(String chrootPath,HostProvider hostProvider, int sessionTimeout, ZooKeeper zooKeeper,ClientWatchManager watcher, ClientCnxnSocket clientCnxnSocket,boolean canBeReadOnly) throws IOException {return new ClientCnxn(chrootPath, hostProvider, sessionTimeout, this,watchManager, clientCnxnSocket, canBeReadOnly);
}// 一直点下去，直到这里
public ClientCnxn(String chrootPath, HostProvider hostProvider, int sessionTimeout, ZooKeeper zooKeeper,ClientWatchManager watcher, ClientCnxnSocket clientCnxnSocket,long sessionId, byte[] sessionPasswd, boolean canBeReadOnly) {this.zooKeeper = zooKeeper;this.watcher = watcher;this.sessionId = sessionId;this.sessionPasswd = sessionPasswd;this.sessionTimeout = sessionTimeout;this.hostProvider = hostProvider;this.chrootPath = chrootPath;connectTimeout = sessionTimeout / hostProvider.size();readTimeout = sessionTimeout * 2 / 3;readOnly = canBeReadOnly;sendThread = new SendThread(clientCnxnSocket);eventThread = new EventThread();this.clientConfig=zooKeeper.getClientConfig();initRequestTimeout();
}

点击SendThread，查找run方法

// ZooKeeperThread 是一个线程，执行它的 run()方法
@Override
public void run() {clientCnxnSocket.introduce(this, sessionId, outgoingQueue);clientCnxnSocket.updateNow();clientCnxnSocket.updateLastSendAndHeard();int to;long lastPingRwServer = Time.currentElapsedTime();final int MAX_SEND_PING_INTERVAL = 10000; //10 secondsInetSocketAddress serverAddress = null;// 在循环里面，循环发送，循环接收while (state.isAlive()) {try {if (!clientCnxnSocket.isConnected()) {// don't re-establish connection if we are closingif (closing) {break;}if (rwServerAddress != null) {serverAddress = rwServerAddress;rwServerAddress = null;} else {serverAddress = hostProvider.next(1000);}// 启动连接服务端startConnect(serverAddress);......// If we are in read-only mode, seek for read/write serverif (state == States.CONNECTEDREADONLY) {long now = Time.currentElapsedTime();int idlePingRwServer = (int) (now - lastPingRwServer);if (idlePingRwServer >= pingRwTimeout) {lastPingRwServer = now;idlePingRwServer = 0;pingRwTimeout =Math.min(2*pingRwTimeout, maxPingRwTimeout);pingRwServer();}to = Math.min(to, pingRwTimeout - idlePingRwServer);}// 接收服务端响应，并处理clientCnxnSocket.doTransport(to, pendingQueue, ClientCnxn.this);......
}private void startConnect(InetSocketAddress addr) throws IOException {......logStartConnect(addr);// 建立连接clientCnxnSocket.connect(addr);
}

ctrl + alt +B 查找 connect 实现类，ClientCnxnSocketNIO.java

@Override
void connect(InetSocketAddress addr) throws IOException {SocketChannel sock = createSock();try {registerAndConnect(sock, addr);} catch (IOException e) {LOG.error("Unable to open socket to " + addr);sock.close();throw e;}initialized = false;/** Reset incomingBuffer*/lenBuffer.clear();incomingBuffer = lenBuffer;
}void registerAndConnect(SocketChannel sock, InetSocketAddress addr) 
throws IOException {sockKey = sock.register(selector, SelectionKey.OP_CONNECT);boolean immediateConnect = sock.connect(addr);if (immediateConnect) {sendThread.primeConnection();}
}void primeConnection() throws IOException {LOG.info("Socket connection established, initiating session, client: {}, server: {}",clientCnxnSocket.getLocalSocketAddress(),clientCnxnSocket.getRemoteSocketAddress());// 标记不是第一次连接isFirstConnect = false;... ...
}

ctrl + alt +B 查找 doTransport 实现类，ClientCnxnSocketNIO.java

@Override
void doTransport(int waitTimeOut, List<Packet> pendingQueue, ClientCnxn cnxn)throws IOException, InterruptedException {selector.select(waitTimeOut);Set<SelectionKey> selected;synchronized (this) {selected = selector.selectedKeys();}// Everything below and until we get back to the select is// non blocking, so time is effectively a constant. That is// Why we just have to do this once, hereupdateNow();for (SelectionKey k : selected) {SocketChannel sc = ((SocketChannel) k.channel());if ((k.readyOps() & SelectionKey.OP_CONNECT) != 0) {if (sc.finishConnect()) {updateLastSendAndHeard();updateSocketAddresses();sendThread.primeConnection();}} else if ((k.readyOps() & (SelectionKey.OP_READ | SelectionKey.OP_WRITE)) != 0) {// 读取服务端应答doIO(pendingQueue, cnxn);}}if (sendThread.getZkState().isConnected()) {if (findSendablePacket(outgoingQueue,sendThread.tunnelAuthInProgress()) != null) {enableWrite();}}selected.clear();
}

7.5 执行 run()

public static void main(String args[]) throws CliException, IOException, InterruptedException{ZooKeeperMain main = new ZooKeeperMain(args);main.run();
}void run() throws CliException, IOException, InterruptedException {......if (jlinemissing) {System.out.println("JLine support is disabled");BufferedReader br =new BufferedReader(new InputStreamReader(System.in));String line;while ((line = br.readLine()) != null) {// 一行一行读取命令executeLine(line);}}} else {// Command line args non-null.  Run what was passed.processCmd(cl);}System.exit(exitCode);
}public void executeLine(String line) throws CliException, InterruptedException, IOException {if (!line.equals("")) {cl.parseCommand(line);addToHistory(commandCount,line);// 处理客户端命令processCmd(cl);commandCount++;}
}protected boolean processCmd(MyCommandOptions co) throws CliException, IOException, InterruptedException {boolean watch = false;try {// 解析命令watch = processZKCmd(co);exitCode = 0;} catch (CliException ex) {exitCode = ex.getExitCode();System.err.println(ex.getMessage());}return watch;
}protected boolean processZKCmd(MyCommandOptions co) throws CliException, IOException, InterruptedException {String[] args = co.getArgArray();String cmd = co.getCommand();if (args.length < 1) {usage();throw new MalformedCommandException("No command entered");}if (!commandMap.containsKey(cmd)) {usage();throw new CommandNotFoundException("Command not found " + cmd);}boolean watch = false;LOG.debug("Processing " + cmd);if (cmd.equals("quit")) {zk.close();System.exit(exitCode);} else if (cmd.equals("redo") && args.length >= 2) {Integer i = Integer.decode(args[1]);if (commandCount <= i || i < 0) { // don't allow redoing this redothrow new MalformedCommandException("Command index out of range");}cl.parseCommand(history.get(i));if (cl.getCommand().equals("redo")) {throw new MalformedCommandException("No redoing redos");}history.put(commandCount, history.get(i));processCmd(cl);} else if (cmd.equals("history")) {for (int i = commandCount - 10; i <= commandCount; ++i) {if (i < 0) continue;System.out.println(i + " - " + history.get(i));}} else if (cmd.equals("printwatches")) {if (args.length == 1) {System.out.println("printwatches is " + (printWatches ? "on" : "off"));} else {printWatches = args[1].equals("on");}} else if (cmd.equals("connect")) {if (args.length >= 2) {connectToZK(args[1]);} else {connectToZK(host);}}// Below commands all need a live connectionif (zk == null || !zk.getState().isAlive()) {System.out.println("Not connected");return false;}// execute from commandMapCliCommand cliCmd = commandMapCli.get(cmd);if(cliCmd != null) {cliCmd.setZk(zk);watch = cliCmd.parse(args).exec();} else if (!commandMap.containsKey(cmd)) {usage();}return watch;
}

这篇关于Zookeeper3.5.7源码分析的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！


http://www.chinasem.cn/article/645851。

相关文章

性能分析之MySQL索引实战案例

性能分析之MySQL索引实战案例

文章目录 一、前言二、准备三、MySQL索引优化四、MySQL 索引知识回顾五、总结 一、前言 在上一讲性能工具之 JProfiler 简单登录案例分析实战中已经发现SQL没有建立索引问题，本文将一起从代码层去分析为什么没有建立索引？ 开源ERP项目地址：https://gitee.com/jishenghua/JSH_ERP 二、准备 打开IDEA找到登录请求资源路径位置
阅读更多...
JAVA智听未来一站式有声阅读平台听书系统小程序源码

JAVA智听未来一站式有声阅读平台听书系统小程序源码

智听未来，一站式有声阅读平台听书系统 🌟&nbsp;开篇：遇见未来，从“智听”开始 在这个快节奏的时代，你是否渴望在忙碌的间隙，找到一片属于自己的宁静角落？是否梦想着能随时随地，沉浸在知识的海洋，或是故事的奇幻世界里？今天，就让我带你一起探索“智听未来”——这一站式有声阅读平台听书系统，它正悄悄改变着我们的阅读方式，让未来触手可及！ 📚&nbsp;第一站：海量资源，应有尽有 走进“智听
阅读更多...
Java ArrayList扩容机制 （源码解读）

Java ArrayList扩容机制 （源码解读）

结论：初始长度为10，若所需长度小于1.5倍原长度，则按照1.5倍扩容。若不够用则按照所需长度扩容。 一. 明确类内部重要变量含义         1：数组默认长度         2:这是一个共享的空数组实例，用于明确创建长度为0时的ArrayList ，比如通过 new ArrayList<>(0)，ArrayList 内部的数组 elementData 会指向这个 EMPTY_EL
阅读更多...
如何在Visual Studio中调试.NET源码

如何在Visual Studio中调试.NET源码

今天偶然在看别人代码时，发现在他的代码里使用了Any判断List<T>是否为空。 我一般的做法是先判断是否为null，再判断Count。 看了一下Count的源码如下： 1 [__DynamicallyInvokable]2 public int Count3 {4 [__DynamicallyInvokable]5 get
阅读更多...
SWAP作物生长模型安装教程、数据制备、敏感性分析、气候变化影响、R模型敏感性分析与贝叶斯优化、Fortran源代码分析、气候数据降尺度与变化影响分析

SWAP作物生长模型安装教程、数据制备、敏感性分析、气候变化影响、R模型敏感性分析与贝叶斯优化、Fortran源代码分析、气候数据降尺度与变化影响分析

查看原文>>>全流程SWAP农业模型数据制备、敏感性分析及气候变化影响实践技术应用 SWAP模型是由荷兰瓦赫宁根大学开发的先进农作物模型，它综合考虑了土壤-水分-大气以及植被间的相互作用；是一种描述作物生长过程的一种机理性作物生长模型。它不但运用Richard方程，使其能够精确的模拟土壤中水分的运动，而且耦合了WOFOST作物模型使作物的生长描述更为科学。 本文让更多的科研人员和农业工作者
阅读更多...
MOLE 2.5 分析分子通道和孔隙

MOLE 2.5 分析分子通道和孔隙

软件介绍 生物大分子通道和孔隙在生物学中发挥着重要作用，例如在分子识别和酶底物特异性方面。 我们介绍了一种名为 MOLE 2.5 的高级软件工具，该工具旨在分析分子通道和孔隙。 与其他可用软件工具的基准测试表明，MOLE 2.5 相比更快、更强大、功能更丰富。作为一项新功能，MOLE 2.5 可以估算已识别通道的物理化学性质。 软件下载 https://pan.quark.cn/s/57
阅读更多...
工厂ERP管理系统实现源码（JAVA）

工厂ERP管理系统实现源码（JAVA）

工厂进销存管理系统是一个集采购管理、仓库管理、生产管理和销售管理于一体的综合解决方案。该系统旨在帮助企业优化流程、提高效率、降低成本，并实时掌握各环节的运营状况。 在采购管理方面，系统能够处理采购订单、供应商管理和采购入库等流程，确保采购过程的透明和高效。仓库管理方面，实现库存的精准管理，包括入库、出库、盘点等操作，确保库存数据的准确性和实时性。 生产管理模块则涵盖了生产计划制定、物料需求计划、
阅读更多...
衡石分析平台使用手册-单机安装及启动

衡石分析平台使用手册-单机安装及启动

单机安装及启动​ 本文讲述如何在单机环境下进行 HENGSHI SENSE 安装的操作过程。 在安装前请确认网络环境，如果是隔离环境，无法连接互联网时，请先按照 离线环境安装依赖的指导进行依赖包的安装，然后按照本文的指导继续操作。如果网络环境可以连接互联网，请直接按照本文的指导进行安装。 准备工作​ 请参考安装环境文档准备安装环境。 配置用户与安装目录。 在操作前请检查您是否有 sud
阅读更多...
线性因子模型 - 独立分量分析（ICA）篇

线性因子模型 - 独立分量分析（ICA）篇

序言 线性因子模型是数据分析与机器学习中的一类重要模型，它们通过引入潜变量（ latent variables \text{latent variables} latent variables）来更好地表征数据。其中，独立分量分析（ ICA \text{ICA} ICA）作为线性因子模型的一种，以其独特的视角和广泛的应用领域而备受关注。 ICA \text{ICA} ICA旨在将观察到的复杂信号
阅读更多...
Spring 源码解读：自定义实现Bean定义的注册与解析

Spring 源码解读：自定义实现Bean定义的注册与解析

引言 在Spring框架中，Bean的注册与解析是整个依赖注入流程的核心步骤。通过Bean定义，Spring容器知道如何创建、配置和管理每个Bean实例。本篇文章将通过实现一个简化版的Bean定义注册与解析机制，帮助你理解Spring框架背后的设计逻辑。我们还将对比Spring中的BeanDefinition和BeanDefinitionRegistry，以全面掌握Bean注册和解析的核心原理。
阅读更多...

Copyright China编程 23002807@qq.com

沪ICP备2023033072号-2