NX二次开发UFUN方式一键去除所有参数

本文主要是介绍NX二次开发UFUN方式一键去除所有参数，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

一、概述

        最近作了一个案例是通过遍历整个显示部件窗口的所有实体合并成一个部件，并且在导航器上也显示一个体，主要的思路是遍历当前所有实体，然后进行一键合并如图1所示，最后去除参数，这时导航器中显示一个体的记录。如下图2所示：

图1.一键合并

图2.一键去参

二、代码记录

注意：本次代码对遍历整个显示部件窗口实体函数进行封装，如需要优化代码，请自行封装。

    /////一键合并///NXOpen::Session *theSession = NXOpen::Session::GetSession();NXOpen::Part *workPart(theSession->Parts()->Work());NXOpen::Part *displayPart(theSession->Parts()->Display());vector<tag_t> thecycleTAG;//找到工作部件所有的体tag_t WorkPartTag1 = UF_PART_ask_display_part();tag_t objTag1 = NULL_TAG;UF_OBJ_cycle_objs_in_part1(WorkPartTag1, UF_solid_type, &objTag1);int type1;int subtype1;while (objTag1 != NULL_TAG){UF_OBJ_ask_type_and_subtype(objTag1, &type1, &subtype1);if (!subtype1){thecycleTAG.push_back(objTag1);}UF_OBJ_cycle_objs_in_part1(WorkPartTag1, UF_solid_type, &objTag1);}NXOpen::Features::BooleanFeature *nullNXOpen_Features_BooleanFeature(NULL);NXOpen::Features::BooleanBuilder *booleanBuilder1;booleanBuilder1 = workPart->Features()->CreateBooleanBuilderUsingCollector(nullNXOpen_Features_BooleanFeature);	//建模公差booleanBuilder1->SetTolerance(0.001);//选择布尔类型——求和BooleanTypeUnitebooleanBuilder1->SetOperation(NXOpen::Features::Feature::BooleanTypeUnite);//目标体的设置NXOpen::Body *body1(dynamic_cast<NXOpen::Body *>(NXOpen::NXObjectManager::Get(thecycleTAG[0])));bool added1;added1 = booleanBuilder1->Targets()->Add(body1);//工具体设置	NXOpen::ScCollector *scCollector2;//定义一个工具收集器scCollector2 = workPart->ScCollectors()->CreateCollector();std::vector<NXOpen::Body *> bodies1;//获得工具体的bodyfor (int i = 1; i < thecycleTAG.size(); i++){NXOpen::Body *body(dynamic_cast<NXOpen::Body *>(NXOpen::NXObjectManager::Get(thecycleTAG[i])));bodies1.push_back(body);}NXOpen::BodyDumbRule *bodyDumbRule1;bodyDumbRule1 = workPart->ScRuleFactory()->CreateRuleBodyDumb(bodies1, true);std::vector<NXOpen::SelectionIntentRule *> rules1(1);rules1[0] = bodyDumbRule1;scCollector2->ReplaceRules(rules1, false);//设置目标体booleanBuilder1->SetToolBodyCollector(scCollector2);//创建、销毁NXOpen::NXObject *nXObject1;nXObject1 = booleanBuilder1->Commit();booleanBuilder1->Destroy();////移除参数//UF_initialize();//找到工作部件所有的体tag_t WorkPartTag = UF_ASSEM_ask_work_part();tag_t objTag = NULL_TAG;UF_OBJ_cycle_objs_in_part1(WorkPartTag, UF_solid_type, &objTag);int type,subtype;//创建链表uf_list_p_t list;UF_MODL_create_list(&list);while (objTag != NULL_TAG){UF_OBJ_ask_type_and_subtype(objTag, &type, &subtype);if (!subtype){UF_MODL_put_list_item(list, objTag);}UF_OBJ_cycle_objs_in_part1(WorkPartTag, UF_solid_type, &objTag);}int count;UF_MODL_ask_list_count(list, &count);if (count>0){//移除参数UF_MODL_delete_object_parms(list);}else{uc1601("温馨提示：未找到要移除参数对象。", 1);}//删除链表，释放内存UF_MODL_delete_list(&list);UF_terminate();

这篇关于NX二次开发UFUN方式一键去除所有参数的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！

---