编译正点原子LINUXB报错make: arm-linux-gnueabihf-gcc：命令未找到

本文主要是介绍编译正点原子LINUXB报错make: arm-linux-gnueabihf-gcc：命令未找到，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

1.报错内容

make: arm-linux-gnueabihf-gcc：命令未找到CHK     include/config/kernel.releaseCHK     include/generated/uapi/linux/version.hCC      scripts/mod/empty.o
/bin/sh: 1: arm-linux-gnueabihf-gcc: not found
make[2]: *** [scripts/mod/empty.o] 错误 127
make[2]: *** 正在等待未完成的任务....CC      scripts/mod/devicetable-offsets.s
/bin/sh: 1: arm-linux-gnueabihf-gcc: not found
make[2]: *** [scripts/mod/devicetable-offsets.s] 错误 127CHK     include/generated/utsrelease.h
make[1]: *** [scripts/mod] 错误 2
make: *** [scripts] 错误 2
make: *** 正在等待未完成的任务.

2.解决办法

需要在 Makefile 添加完整路径内容：

ARCH            ?= arm
CROSS_COMPILE	?= /usr/local/arm/gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-

3./bin/sh: 1: lzop: not found

/bin/sh: 1: lzop: not found
make[2]: *** [arch/arm/boot/compressed/piggy.lzo] 错误 1
make[1]: *** [arch/arm/boot/compressed/vmlinux] 错误 2
make: *** [zImage] 错误 2
make: *** 正在等待未完成的任务....MODPOST 77 modules
make: INTERNAL: Exiting with 17 jobserver tokens available; should be 16!

解决办法：

sudo apt-get install lzop

4.编译成功

  SHIPPED arch/arm/boot/compressed/lib1funcs.SSHIPPED arch/arm/boot/compressed/ashldi3.SSHIPPED arch/arm/boot/compressed/bswapsdi2.SAS      arch/arm/boot/compressed/hyp-stub.oAS      arch/arm/boot/compressed/lib1funcs.oAS      arch/arm/boot/compressed/ashldi3.oAS      arch/arm/boot/compressed/bswapsdi2.oAS      arch/arm/boot/compressed/piggy.lzo.oLD      arch/arm/boot/compressed/vmlinuxOBJCOPY arch/arm/boot/zImageKernel: arch/arm/boot/zImage is ready

这篇关于编译正点原子LINUXB报错make: arm-linux-gnueabihf-gcc：命令未找到的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！

---