POJ 1094 Sorting It All Out - (拓扑排序)

2023-10-17 23:34
文章标签 排序 poj 拓扑 sorting 1094

本文主要是介绍POJ 1094 Sorting It All Out - (拓扑排序),希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

题目链接:http://poj.org/problem?id=1094

拓扑排序
当然这份代码是没有AC的,因为 unodered_map 在 POJ 上不能通过编译。
我也不知道 C++ 11 之前 hash 应该用什么。。到时候换一下好了。
另外现在感觉代码比较规范,很可能会 TLE 。

(看了讨论区,发现只要在有环之前完成排序就可以,然后输出此时所用的关系数量,这题目也是迷)

#include <stdio.h>  
#include <vector>   
#include <algorithm>
#include <set>
#include <unordered_map>
#include <stack>
using namespace std;//POJ 1094 Sorting It All Outstruct node
{int ref;char character;vector<node*> next;node(char c) :character(c), next(0), ref(0) {}node() :character(0), next(0), ref(0) {}
};int main()
{char buffer[5];int n, m;while (~scanf("%d%d", &n, &m)){if (n == 0)break;//read the m lines of relationsset<char> nodes;unordered_map<char, node*> nodes_info;for (int i = 0; i < m; ++i){char a, b;scanf("%s", buffer); sscanf(buffer, "%c<%c", &a, &b);nodes.insert(a);nodes.insert(b);try { nodes_info.at(b); }catch (std::out_of_range& e) { nodes_info[b] = new node(b); }try { nodes_info.at(a); }catch (std::out_of_range& e) { nodes_info[a] = new node(a); }vector<node*>::iterator it = nodes_info[a]->next.begin();for (; it != nodes_info[a]->next.end(); ++it)if (*it == nodes_info[b])break;if (it == nodes_info[a]->next.end()){nodes_info[a]->next.push_back(nodes_info[b]);++nodes_info[b]->ref;}}//no possibility to form a relationif (n > m + 1){//check out whether there exists a circlestack<char> stk;int counter = 0;for (set<char>::iterator it = nodes.begin(); it != nodes.end(); ++it)if (nodes_info[*it]->ref == 0){stk.push(*it);counter++;}while (!stk.empty()){char c = stk.top(); stk.pop();for (vector<node*>::iterator it = nodes_info[c]->next.begin();it != nodes_info[c]->next.end(); ++it){if (--(*it)->ref == 0){stk.push((*it)->character);counter++;}}}if (nodes.size() > counter){printf("Inconsistency found after %d relations.\n", m);continue;}//no circle, so not determinedprintf("Sorted sequence cannot be determined.\n");continue;}//has possibility to form the relationelse{char* result = new char[n];int cur_pos = 0;stack<char> stk;int counter = 0;for (set<char>::iterator it = nodes.begin(); it != nodes.end(); ++it)if (nodes_info[*it]->ref == 0){stk.push(*it);counter++;}bool isDetermined = true;while (!stk.empty()){if (stk.size() > 1)isDetermined = false;char c = stk.top(); stk.pop();result[cur_pos++] = c;for (vector<node*>::iterator it = nodes_info[c]->next.begin();it != nodes_info[c]->next.end(); ++it){if (--((*it)->ref) == 0){stk.push((*it)->character);counter++;}}}if (nodes.size() > counter)printf("Inconsistency found after %d relations.\n", m);else if (!isDetermined)printf("Sorted sequence cannot be determined.\n");else {printf("Sorted sequence determined after %d relations: ", m);for (int i = 0; i < n; ++i)printf("%c", result[i]);printf(".\n");}delete[] result;}}system("pause");return 0;
}

这篇关于POJ 1094 Sorting It All Out - (拓扑排序)的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/228697

相关文章

【数据结构】——原来排序算法搞懂这些就行,轻松拿捏

前言:快速排序的实现最重要的是找基准值,下面让我们来了解如何实现找基准值 基准值的注释:在快排的过程中,每一次我们要取一个元素作为枢纽值,以这个数字来将序列划分为两部分。 在此我们采用三数取中法,也就是取左端、中间、右端三个数,然后进行排序,将中间数作为枢纽值。 快速排序实现主框架: //快速排序 void QuickSort(int* arr, int left, int rig

usaco 1.3 Mixing Milk (结构体排序 qsort) and hdu 2020(sort)

到了这题学会了结构体排序 于是回去修改了 1.2 milking cows 的算法~ 结构体排序核心: 1.结构体定义 struct Milk{int price;int milks;}milk[5000]; 2.自定义的比较函数,若返回值为正,qsort 函数判定a>b ;为负,a<b;为0,a==b; int milkcmp(const void *va,c

poj 3974 and hdu 3068 最长回文串的O(n)解法(Manacher算法)

求一段字符串中的最长回文串。 因为数据量比较大,用原来的O(n^2)会爆。 小白上的O(n^2)解法代码:TLE啦~ #include<stdio.h>#include<string.h>const int Maxn = 1000000;char s[Maxn];int main(){char e[] = {"END"};while(scanf("%s", s) != EO

hdu 2602 and poj 3624(01背包)

01背包的模板题。 hdu2602代码: #include<stdio.h>#include<string.h>const int MaxN = 1001;int max(int a, int b){return a > b ? a : b;}int w[MaxN];int v[MaxN];int dp[MaxN];int main(){int T;int N, V;s

poj 1511 Invitation Cards(spfa最短路)

题意是给你点与点之间的距离,求来回到点1的最短路中的边权和。 因为边很大,不能用原来的dijkstra什么的,所以用spfa来做。并且注意要用long long int 来存储。 稍微改了一下学长的模板。 stack stl 实现代码: #include<stdio.h>#include<stack>using namespace std;const int M

poj 3259 uva 558 Wormholes(bellman最短路负权回路判断)

poj 3259: 题意:John的农场里n块地,m条路连接两块地,w个虫洞,虫洞是一条单向路,不但会把你传送到目的地,而且时间会倒退Ts。 任务是求你会不会在从某块地出发后又回来,看到了离开之前的自己。 判断树中是否存在负权回路就ok了。 bellman代码: #include<stdio.h>const int MaxN = 501;//农场数const int

poj 1258 Agri-Net(最小生成树模板代码)

感觉用这题来当模板更适合。 题意就是给你邻接矩阵求最小生成树啦。~ prim代码:效率很高。172k...0ms。 #include<stdio.h>#include<algorithm>using namespace std;const int MaxN = 101;const int INF = 0x3f3f3f3f;int g[MaxN][MaxN];int n

poj 1287 Networking(prim or kruscal最小生成树)

题意给你点与点间距离,求最小生成树。 注意点是,两点之间可能有不同的路,输入的时候选择最小的,和之前有道最短路WA的题目类似。 prim代码: #include<stdio.h>const int MaxN = 51;const int INF = 0x3f3f3f3f;int g[MaxN][MaxN];int P;int prim(){bool vis[MaxN];

poj 2349 Arctic Network uva 10369(prim or kruscal最小生成树)

题目很麻烦,因为不熟悉最小生成树的算法调试了好久。 感觉网上的题目解释都没说得很清楚,不适合新手。自己写一个。 题意:给你点的坐标,然后两点间可以有两种方式来通信:第一种是卫星通信,第二种是无线电通信。 卫星通信:任何两个有卫星频道的点间都可以直接建立连接,与点间的距离无关; 无线电通信:两个点之间的距离不能超过D,无线电收发器的功率越大,D越大,越昂贵。 计算无线电收发器D

poj 1502 MPI Maelstrom(单源最短路dijkstra)

题目真是长得头疼,好多生词,给跪。 没啥好说的,英语大水逼。 借助字典尝试翻译了一下,水逼直译求不喷 Description: BIT他们的超级计算机最近交货了。(定语秀了一堆词汇那就省略吧再见) Valentine McKee的研究顾问Jack Swigert,要她来测试一下这个系统。 Valentine告诉Swigert:“因为阿波罗是一个分布式共享内存的机器,所以它的内存访问