找不到cannot find -lpython3.5m caffe anaconda python3 ubuntu16.04

本文主要是介绍找不到cannot find -lpython3.5m caffe anaconda python3 ubuntu16.04，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

LD -o .build_release/lib/libcaffe.so.1.0.0
/usr/bin/ld: 找不到 -lpython3.5m
collect2: error: ld returned 1 exit status
Makefile:572: recipe for target '.build_release/lib/libcaffe.so.1.0.0' failed
make: *** [.build_release/lib/libcaffe.so.1.0.0] Error 1

这里提供另一种解决方法，如果你想用pyhton3,而且是anoconda3那么肯定不能用caffe包中的example.config。

你可能仔细看了config然后删除了pyhton3之前的注释，并且把python2注释了，而且还添加了anaconda的配置，然后你运行，就会出现本错误，你可以更改下把config中的3.5m改成3.5你会发现错误也跟着便，没错，就是因为你放出了python3的配置参数，导致了这个错误。所以你应该把python3注释回去。我的config如下：

## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!# cuDNN acceleration switch (uncomment to build with cuDNN).
# USE_CUDNN := 1# CPU-only switch (uncomment to build without GPU support).CPU_ONLY := 1# uncomment to disable IO dependencies and corresponding data layers
# USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
#    You should not set this flag if you will be reading LMDBs with any
#    possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1# Uncomment if you're using OpenCV 3
#<