5.Jenkins入门基础使用补充说明与相关问题总结

2024-08-28 03:08
文章标签 基础 问题 总结 使用 入门 说明 补充 相关 jenkins

本文主要是介绍5.Jenkins入门基础使用补充说明与相关问题总结，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

目录一览:

  • 0x05 补充说明

    • (1) 内置环境变量

    • (2) Jenkins 管理员密码忘记重置

    • (3) Jenkins 升级迁移

  • 0x06 入坑&出坑

WeiyiGeek Blog - 为了能到远方，脚下的每一步都不能少。

Tips : 本文章来源 Blog 站点或者 WeiyiGeek 公众账号 (技术交流、友链交换请邮我哟), 原文地址: 5.Jenkins入门基础使用补充说明与相关问题总结

  • 微信公众号-WeiyiGeek # 精华文章发布地址(及时发布)
  • 首页-https://weiyigeek.top # 采用cloudflare CDN 国内有时访问较慢
  • https://weiyigeek.gitee.io # 国内访问快但可能会有更新不及时的情况

WeiyiGeek-公众账号

0x05 补充说明

(1) 内置环境变量

PS : Jenkins 默认的环境变量列表 http://jenkins.weiyigeek.top:8080/env-vars.html/

BUILD_NUMBER #The current build number, such as "153"
BUILD_ID# The current build ID, identical to BUILD_NUMBER for builds created in 1.597+, but a YYYY-MM-DD_hh-mm-ss timestamp for older builds
BUILD_DISPLAY_NAME# The display name of the current build, which is something like "#153" by default.
JOB_NAME# Name of the project of this build, such as "foo" or "foo/bar".
JOB_BASE_NAME# Short Name of the project of this build stripping off folder paths, such as "foo" for "bar/foo".
BUILD_TAG# String of "jenkins-${JOB_NAME}-${BUILD_NUMBER}". All forward slashes ("/") in the JOB_NAME are replaced with dashes ("-"). Convenient to put into a resource file, a jar file, etc for easier identification.
EXECUTOR_NUMBER# The unique number that identifies the current executor (among executors of the same machine) that’s carrying out this build. This is the number you see in the "build executor status", except that the number starts from 0, not 1.
NODE_NAME# Name of the agent if the build is on an agent, or "master" if run on master
NODE_LABELS# Whitespace-separated list of labels that the node is assigned.
WORKSPACE# The absolute path of the directory assigned to the build as a workspace.
WORKSPACE_TMP# A temporary directory near the workspace that will not be browsable and will not interfere with SCM checkouts. May not initially exist, so be sure to create the directory as needed (e.g., mkdir -p on Linux). Not defined when the regular workspace is a drive root.
JENKINS_HOME# The absolute path of the directory assigned on the master node for Jenkins to store data.
JENKINS_URL# Full URL of Jenkins, like http://server:port/jenkins/ (note: only available if Jenkins URL set in system configuration)
BUILD_URL# Full URL of this build, like http://server:port/jenkins/job/foo/15/ (Jenkins URL must be set)
JOB_URL# Full URL of this job, like http://server:port/jenkins/job/foo/ (Jenkins URL must be set)
GIT_COMMIT# The commit hash being checked out.
GIT_PREVIOUS_COMMIT# The hash of the commit last built on this branch, if any.
GIT_PREVIOUS_SUCCESSFUL_COMMIT# The hash of the commit last successfully built on this branch, if any.
GIT_BRANCH# The remote branch name, if any.
GIT_LOCAL_BRANCH# The local branch name being checked out, if applicable.
GIT_CHECKOUT_DIR# The directory that the repository will be checked out to. This contains the value set in Checkout to a sub-directory, if used.
GIT_URL# The remote URL. If there are multiple, will be GIT_URL_1, GIT_URL_2, etc.
GIT_COMMITTER_NAME# The configured Git committer name, if any, that will be used for FUTURE commits from the current workspace. It is read from the Global Config user.name Value field of the Jenkins Configure System page.
GIT_AUTHOR_NAME# The configured Git author name, if any, that will be used for FUTURE commits from the current workspace. It is read from the Global Config user.name Value field of the Jenkins Configure System page.
GIT_COMMITTER_EMAIL# The configured Git committer email, if any, that will be used for FUTURE commits from the current workspace. It is read from the Global Config user.email Value field of the Jenkins Configure System page.
GIT_AUTHOR_EMAIL# The configured Git author email, if any, that will be used for FUTURE commits from the current workspace. It is read from the Global Config user.email Value field of the Jenkins Configure System page.

测试环境变量:

#!/bin/bash
echo BUILD_NUMBER: ${BUILD_NUMBER }echo BUILD_ID: ${BUILD_ID}echo BUILD_DISPLAY_NAME: $BUILD_DISPLAY_NAME:echo JOB_NAME: $JOB_NAMEecho JOB_BASE_NAME: $JOB_BASE_NAMEecho BUILD_TAG: $BUILD_TAGecho EXECUTOR_NUMBER: $EXECUTOR_NUMBERecho NODE_NAME: $NODE_NAMEecho NODE_LABELS: $NODE_LABELSecho WORKSPACE: $WORKSPACEecho WORKSPACE_TMP: $WORKSPACE_TMPecho JENKINS_HOME: $JENKINS_HOMEecho JENKINS_URL: $JENKINS_URLecho BUILD_URL: $BUILD_URLecho JOB_URL: $JOB_URLecho GIT_COMMIT: $GIT_COMMITecho GIT_PREVIOUS_COMMIT: $GIT_PREVIOUS_COMMITecho GIT_PREVIOUS_SUCCESSFUL_COMMIT: $GIT_PREVIOUS_SUCCESSFUL_COMMITecho GIT_BRANCH: $GIT_BRANCHecho GIT_LOCAL_BRANCH: $GIT_LOCAL_BRANCHecho GIT_CHECKOUT_DIR: $GIT_CHECKOUT_DIRecho GIT_URL: $GIT_URLecho GIT_COMMITTER_NAME: $GIT_COMMITTER_NAMEecho GIT_AUTHOR_NAME: $GIT_AUTHOR_NAMEecho GIT_COMMITTER_EMAIL: $GIT_COMMITTER_EMAILecho GIT_AUTHOR_EMAIL: $GIT_AUTHOR_EMAIL

测试结果:

+ /bin/bash /tmp/script/env.sh
BUILD_NUMBER: 22
BUILD_ID: 22
BUILD_DISPLAY_NAME: #22:
JOB_NAME: Maven-HelloWorld
JOB_BASE_NAME: Maven-HelloWorld
BUILD_TAG: jenkins-Maven-HelloWorld-22
EXECUTOR_NUMBER: 0
NODE_NAME: master
NODE_LABELS: master
WORKSPACE: /var/lib/jenkins/workspace/Maven-HelloWorld
WORKSPACE_TMP: /var/lib/jenkins/workspace/Maven-HelloWorld@tmp
JENKINS_HOME: /var/lib/jenkins
JENKINS_URL: http://jenkins.weiyigeek.top:8080/
BUILD_URL: http://jenkins.weiyigeek.top:8080/job/Maven-HelloWorld/22/
JOB_URL: http://jenkins.weiyigeek.top:8080/job/Maven-HelloWorld/
GIT_COMMIT: 0f50b10b09c160a86972178d94ca1f0a704dd767
GIT_PREVIOUS_COMMIT: 0f50b10b09c160a86972178d94ca1f0a704dd767
GIT_PREVIOUS_SUCCESSFUL_COMMIT: 0f50b10b09c160a86972178d94ca1f0a704dd767
GIT_BRANCH: v1.7
GIT_URL: git@gitlab.weiyigeek.top:ci-cd/java-maven.git
GIT_AUTHOR_NAME:
GIT_AUTHOR_EMAIL:
GIT_COMMITTER_NAME:
GIT_COMMITTER_EMAIL:
GIT_LOCAL_BRANCH:
GIT_CHECKOUT_DIR:
Finished: SUCCESS

(2) Jenkins 管理员密码忘记重置

1.找到用户的路径

[root@jenkins-node1 ~]# cd /var/lib/jenkins/users/
[root@jenkins-node1 users]# tree
.
├── 552408925_8628634723176281851
│   └── config.xml
├── admin_8092868597319509744
│   └── config.xml
├── jenkins_3327043579358903316     #我使用的jenkins作为管理员(如果你是admin就进admin目录)
│   └── config.xml                  #修改config.xml
└── users.xml3 directories, 4 files

2.修改jenkins用户目录下的config.xml，定位到<passwordHash>那行删除，改为如下内容-

[root@jenkins-node1 users]# vim config.xml
<passwordHash>#jbcrypt:$2a$10$slYx6.2Xyss6w9LnuiwnNOReuvkcSkaI.Y.Z2AC6Sp7hdF7hhxlsK</passwordHash>

3.新密码为bgx.com 记得重启jenkins生效

(3) Jenkins 升级迁移

描述: 在使用 Jenkins 时候显示新版本的 Jenkins (2.272) 可以下载 (变更记录)，正好可以实践一哈Jenkins的升级&迁移。
PS : 如果是是在生产环境中升级建议慎重，可能会导致插件和升级版本不兼容的情况;

操作流程:

# (1) 下载更新包 
wget https://updates.jenkins.io/download/war/2.272/jenkins.war # (2) 停止 Jenkins 服务
jenkins:/usr/share/jenkins# systemctl stop jenkins && ls# jenkins.war# (3) 备份上一个版本
jenkins:/usr/share/jenkins# mv jenkins.war jenkins.war.2.263.1.bak
jenkins:/usr/share/jenkins# cp /home/weiyigeek/jenkins.war jenkins.war
jenkins:/usr/share/jenkins# ls -alh# -rw-r--r--   1 root root  67M Dec 24 02:38 jenkins.war# -rw-r--r--   1 root root  65M Dec  2 13:56 jenkins.war.2.263.1.bak# (4) 启动 Jenkins 服务
jenkins:/usr/share/jenkins# systemctl start jenkins
jenkins:/usr/share/jenkins# systemctl status jenkins# ● jenkins.service - LSB: Start Jenkins at boot time#     Loaded: loaded (/etc/init.d/jenkins; generated)#     Active: active (exited) since Thu 2020-12-24 02:38:50 UTC; 4s ago#       Docs: man:systemd-sysv-generator(8)#     Process: 448375 ExecStart=/etc/init.d/jenkins start (code=exited, status=0/SUCCESS)# Dec 24 02:38:48 gitlab systemd[1]: Starting LSB: Start Jenkins at boot time...# Dec 24 02:38:48 gitlab jenkins[448375]: Correct java version found# Dec 24 02:38:48 gitlab jenkins[448375]:  * Starting Jenkins Automation Server jenkins# Dec 24 02:38:48 gitlab su[448432]: (to jenkins) root on none# Dec 24 02:38:48 gitlab su[448432]: pam_unix(su-l:session): session opened for user jenkins by (uid=0)# Dec 24 02:38:49 gitlab su[448432]: pam_unix(su-l:session): session closed for user jenkins# Dec 24 02:38:50 gitlab jenkins[448375]:    ...done.# Dec 24 02:38:50 gitlab systemd[1]: Started LSB: Start Jenkins at boot time.# (5) 访问 Jenkins UI 界面验证升级版本
http://jenkins.weiyigeek.top:8080/about/

0x06 入坑&出坑

问题1.jenkins depends on daemon; however Package daemon is not installed.
问题描述: 在Ubuntu 采用 dpkg 安装 jenkins_2.263.1_all.deb 时报错提示 daemon 包未安装
问题复原:

$ sudo dpkg -i jenkins_2.263.1_all.deb
Selecting previously unselected package jenkins.
(Reading database ... 115038 files and directories currently installed.)
Preparing to unpack jenkins_2.263.1_all.deb ...
Unpacking jenkins (2.263.1) ...
dpkg: dependency problems prevent configuration of jenkins:jenkins depends on daemon; however:Package daemon is not installed.dpkg: error processing package jenkins (--install):dependency problems - leaving unconfigured
Processing triggers for systemd (245.4-4ubuntu3.2) ...
Errors were encountered while processing:jenkins

解决办法:

sudo apt install -y daemon

问题2:Jenkins 启动时显示 ERROR: No Java executable found in current PATH: /bin:/usr/bin:/sbin:/usr/sbin
问题复原:

$ systemctl status jenkins
Dec 23 14:02:57 gitlab systemd[1]: Starting LSB: Start Jenkins at boot time...
Dec 23 14:02:57 gitlab jenkins[356298]: ERROR: No Java executable found in current PATH: /bin:/usr/bin:/sbin:/usr/sbin
Dec 23 14:02:57 gitlab jenkins[356298]: If you actually have java installed on the system make sure the executable is in the aforementioned path and that 'type -p ja>
Dec 23 14:02:57 gitlab systemd[1]: jenkins.service: Control process exited, code=exited, status=1/FAILURE
Dec 23 14:02:57 gitlab systemd[1]: jenkins.service: Failed with result 'exit-code'.
Dec 23 14:02:57 gitlab systemd[1]: Failed to start LSB: Start Jenkins at boot time.

问题原因: 未找寻到有效的Java执行环境;
解决流程:

①.先执行echo $PATH 看看环境变量运行结果如下：
/usr/maven/maven/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/java/jdk1.8/bin
如果连这都没有的话重新安装Java。②.建立软连接：ln -s /usr/java/jdk1.8/bin/java /usr/bin/java（换成你自己的路径）
Please wait while Jenkins is getting ready to work (jenkins)
如果界面提示Jenkins正在启动,请稍后…或者提示
Please wait while Jenkins is getting ready to work…

问题3.安装Jenkins后或者安装插件时候一直在加载;
问题描述: 由于Jenkins官方插件下载地址没被墙但是网速很慢，下载时间也长;
解决方法:换清华的镜像进去之后下载插件即可 (http://updates.jenkins-ci.org/download/)
操作流程: 需要你进入jenkins的工作目录

# 打开 hudson.model.UpdateCenter.xml 把 http://updates.jenkins-ci.org/update-center.json 改成 http://mirrors.tuna.tsinghua.edu.cn/jenkins/updates/update-center.json
sed -i "s#updates.jenkins.io#mirrors.tuna.tsinghua.edu.cn/jenkins/updates#g" /var/lib/jenkins/hudson.model.UpdateCenter.xml# 上面的命令就是将将安装目录下的 hudson.model.UpdateCenter.xml 中改成
<?xml version='1.1' encoding='UTF-8'?>
<sites><site><id>default</id><url>https://mirrors.tuna.tsinghua.edu.cn/jenkins/updates/update-center.json</url></site>
</sites># (2) 将updates文件夹下的default.json 中所有 http://updates.jenkins-ci.org/download/替换为 https://mirrors.tuna.tsinghua.edu.cn/jenkins/ PS: 也可以在后台进行设置
https://mirrors.tuna.tsinghua.edu.cn/jenkins/updates/update-center.json# (3) 修改完成后重启 Jenkins 即可

问题4: 未正确配置Jenkins基础URL等相关信息;
问题描述: Jenkins的根URL是空的，但是需要Jenkins的许多特性的正确操作，如电子邮件通知、PR状态更新和环境变量，如BUILD_URL。
请提供Jenkins配置中的准确值。

Jenkins root URL is empty but is required for the proper operation of many Jenkins features like email notifications, PR status update, and environment variables such as BUILD_URL.Please provide an accurate value in Jenkins configuration.

解决办法: Dashboard -> 配置 -> Jenkins Location -> Jenkins 地址 & 邮箱

问题5.无法连接仓库：Command "git ls-remote -h -- git@gitlab.weiyigeek.top:ci-cd/blog.git HEAD" returned status code 128:
问题复原:

stdout:stderr: Host key verification failed.fatal: Could not read from remote repository.
# Please make sure you have the correct access rights and the repository exists.

问题原因: 由于采用SSH协议进行代码的拉取和信息的查看，在利用公密钥首次链接时候未绑定其机器的公钥信息, 将会导致 Host key verification failed.
解决办法: 在连接的机器上先执行git -T git@gitlab.weiyigeek.top保存其主机的公钥信息;

# 例如 首次连接Gitlab时候需要进行主机于公钥绑定
ssh -T git@gitlab.com
# 无法建立主机“gitlab.com(172.65.251.78)”的真实性。
The authenticity of host 'gitlab.com (172.65.251.78)' can\'t be established.
ECDSA key fingerprint is SHA256:HbW3g8zUjNSksFbqTiUWPWg2Bq1x8xdGUrliXFzSnUw.
Are you sure you want to continue connecting (yes/no/[fingerprint])?$ cat ~/.ssh/known_hosts
gitlab.com,172.65.251.78 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAABFSMqzJeV9rUzU4kWitGjeR4PWSa29SPqJ1fVkhtj3Hw9xjLVXVYrU9QOLXBpQ6KWjbjTDTdDkoohFzgbEYI=

问题6.Jenkins 内置邮件通知发信测试 Failed to send out e-mail javax.mail.AuthenticationFailedException: 535 Error:
错误信息：

Failed to send out e-mail
javax.mail.AuthenticationFailedException: 535 Error: ÇëʹÓÃÊÚȨÂëµÇ¼¡£ÏêÇéÇë¿´: http://service.mail.qq.com/cgi-bin/help?subtype=1&&id=28&&no=1001256at com.sun.mail.smtp.SMTPTransport$Authenticator.authenticate(SMTPTransport.java:947)at com.sun.mail.smtp.SMTPTransport.authenticate(SMTPTransport.java:858)at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:762)at javax.mail.Service.connect(Service.java:364)

错误原因: 配置STMP的邮箱账号，输入的认证字符串是邮箱密码而并非生成的客户端密码, 在 腾讯企业邮箱、163邮箱都需要使用生成的客户端密码进行登录;

问题7.Jenkins 内置邮件通知发信测试 com.sun.mail.smtp.SMTPSenderFailedException: 501 mail from address must be same as authorization user
错误信息:

Failed to send out e-mail
com.sun.mail.smtp.SMTPSenderFailedException: 501 mail from address must be same as authorization userat com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1817)
Caused: com.sun.mail.smtp.SMTPSendFailedException: 501 mail from address must be same as authorization user
;nested exception is:com.sun.mail.smtp.SMTPSenderFailedException: 501 mail from address must be same as authorization userat com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:2374)at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1808)at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:1285)at javax.mail.Transport.send0(Transport.java:231)

错误原因: 最后发现是jenkins url下面的系统管理员邮件地址没有填写或者与STMP发信邮箱不一致
解决办法: 填写系统管理员邮箱与STMP发信邮箱地址一致就可以了。

问题8.Jenkins 内置邮件通知发信测试com.sun.mail.smtp.SMTPAddressFailedException: 501 Bad address syntax

错误信息:

ERROR: Invalid Addresses
javax.mail.SendFailedException: Invalid Addresses;nested exception is:com.sun.mail.smtp.SMTPAddressFailedException: 501 Bad address syntaxat com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:2064)at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:1286)at javax.mail.Transport.send0(Transport.java:231)at javax.mail.Transport.send(Transport.java:100)at hudson.tasks.MailSender.run(MailSender.java:130)at hudson.tasks.MailSender.execute(MailSender.java:105)at hudson.maven.MavenModuleSetBuild$MavenModuleSetBuildExecution.cleanUp(MavenModuleSetBuild.java:1093)at hudson.model.Run.execute(Run.java:1954)at hudson.maven.MavenModuleSetBuild.run(MavenModuleSetBuild.java:543)at hudson.model.ResourceController.execute(ResourceController.java:97)at hudson.model.Executor.run(Executor.java:429)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 501 Bad address syntaxat com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1917)... 10 more
Finished: FAILURE

错误原因: 输入的接收邮箱地址是无效的格式;

WeiyiGeek Blog - 为了能到远方，脚下的每一步都不能少。

Tips : 本文章来源 Blog 站点或者 WeiyiGeek 公众账号 (友链交换请邮我哟):

  • 微信公众号-WeiyiGeek` # 精华文章发布地址

  • https://weiyigeek.top # 采用cloudflare CDN 国内有时访问较慢

  • https://weiyigeek.gitee.io # 国内访问快可能会有更新不及时得情况

  • 个人知乎-WeiyiGeek

Tips: 更多学习笔记文章请关注 WeiyiGeek 公众账号
【微信公众号关注(点击)】
【邮箱联系: Master#weiyigeek.top】

这篇关于5.Jenkins入门基础使用补充说明与相关问题总结的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！


http://www.chinasem.cn/article/1113549。

相关文章

vue使用docxtemplater导出word

vue使用docxtemplater导出word

《vue使用docxtemplater导出word》docxtemplater是一种邮件合并工具,以编程方式使用并处理条件、循环,并且可以扩展以插入任何内容,下面我们来看看如何使用docxtempl... 目录docxtemplatervue使用docxtemplater导出word安装常用语法 封装导出方
阅读更多...
Linux换行符的使用方法详解

Linux换行符的使用方法详解

《Linux换行符的使用方法详解》本文介绍了Linux中常用的换行符LF及其在文件中的表示,展示了如何使用sed命令替换换行符,并列举了与换行符处理相关的Linux命令,通过代码讲解的非常详细,需要的... 目录简介检测文件中的换行符使用 cat -A 查看换行符使用 od -c 检查字符换行符格式转换将
阅读更多...
使用Jackson进行JSON生成与解析的新手指南

使用Jackson进行JSON生成与解析的新手指南

《使用Jackson进行JSON生成与解析的新手指南》这篇文章主要为大家详细介绍了如何使用Jackson进行JSON生成与解析处理,文中的示例代码讲解详细,感兴趣的小伙伴可以跟随小编一起学习一下... 目录1. 核心依赖2. 基础用法2.1 对象转 jsON（序列化）2.2 JSON 转对象（反序列化）3.
阅读更多...
springboot循环依赖问题案例代码及解决办法

springboot循环依赖问题案例代码及解决办法

《springboot循环依赖问题案例代码及解决办法》在SpringBoot中,如果两个或多个Bean之间存在循环依赖（即BeanA依赖BeanB,而BeanB又依赖BeanA）,会导致Spring的... 目录1. 什么是循环依赖？2. 循环依赖的场景案例3. 解决循环依赖的常见方法方法 1：使用 @La
阅读更多...
使用Python实现快速搭建本地HTTP服务器

使用Python实现快速搭建本地HTTP服务器

《使用Python实现快速搭建本地HTTP服务器》：本文主要介绍如何使用Python快速搭建本地HTTP服务器,轻松实现一键HTTP文件共享,同时结合二维码技术,让访问更简单,感兴趣的小伙伴可以了... 目录1. 概述2. 快速搭建 HTTP 文件共享服务2.1 核心思路2.2 代码实现2.3 代码解读3.
阅读更多...
Elasticsearch 在 Java 中的使用教程

Elasticsearch 在 Java 中的使用教程

《Elasticsearch在Java中的使用教程》Elasticsearch是一个分布式搜索和分析引擎,基于ApacheLucene构建,能够实现实时数据的存储、搜索、和分析,它广泛应用于全文... 目录1. Elasticsearch 简介2. 环境准备2.1 安装 Elasticsearch2.2 J
阅读更多...
使用C#代码在PDF文档中添加、删除和替换图片

使用C#代码在PDF文档中添加、删除和替换图片

《使用C#代码在PDF文档中添加、删除和替换图片》在当今数字化文档处理场景中,动态操作PDF文档中的图像已成为企业级应用开发的核心需求之一,本文将介绍如何在.NET平台使用C#代码在PDF文档中添加、... 目录引言用C#添加图片到PDF文档用C#删除PDF文档中的图片用C#替换PDF文档中的图片引言在当
阅读更多...
Java中List的contains()方法的使用小结

Java中List的contains()方法的使用小结

《Java中List的contains()方法的使用小结》List的contains()方法用于检查列表中是否包含指定的元素,借助equals()方法进行判断,下面就来介绍Java中List的c... 目录详细展开1. 方法签名2. 工作原理3. 使用示例4. 注意事项总结结论：List 的 contain
阅读更多...
C#使用SQLite进行大数据量高效处理的代码示例

C#使用SQLite进行大数据量高效处理的代码示例

《C#使用SQLite进行大数据量高效处理的代码示例》在软件开发中,高效处理大数据量是一个常见且具有挑战性的任务,SQLite因其零配置、嵌入式、跨平台的特性,成为许多开发者的首选数据库,本文将深入探... 目录前言准备工作数据实体核心技术批量插入：从乌龟到猎豹的蜕变分页查询：加载百万数据异步处理：拒绝界面
阅读更多...
Android中Dialog的使用详解

Android中Dialog的使用详解

《Android中Dialog的使用详解》Dialog（对话框）是Android中常用的UI组件,用于临时显示重要信息或获取用户输入,本文给大家介绍Android中Dialog的使用,感兴趣的朋友一起... 目录android中Dialog的使用详解1. 基本Dialog类型1.1 AlertDialog（
阅读更多...

Copyright China编程 23002807@qq.com

沪ICP备2023033072号-2