Android.mk各项参数以及默认值文件(build/core/config.mk 及base_rules.mk)

2024-05-06 15:58

本文主要是介绍Android.mk各项参数以及默认值文件(build/core/config.mk 及base_rules.mk),希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

build/core/config.mk 文件

# This is included by the top-level Makefile.
# It sets up standard variables based on the
# current configuration and platform, which
# are not specific to what is being built.


# Only use ANDROID_BUILD_SHELL to wrap around bash.
# DO NOT use other shells such as zsh.
ifdef ANDROID_BUILD_SHELL
SHELL := $(ANDROID_BUILD_SHELL)
else
# Use bash, not whatever shell somebody has installed as /bin/sh
# This is repeated from main.mk, since envsetup.sh runs this file
# directly.
SHELL := /bin/bash
endif


# Tell python not to spam the source tree with .pyc files.  This
# only has an effect on python 2.6 and above.
export PYTHONDONTWRITEBYTECODE := 1


# Standard source directories.
SRC_DOCS:= $(TOPDIR)docs
# TODO: Enforce some kind of layering; only add include paths
#       when a module links against a particular library.
# TODO: See if we can remove most of these from the global list.
SRC_HEADERS := \
$(TOPDIR)system/core/include \
$(TOPDIR)hardware/libhardware/include \
$(TOPDIR)hardware/libhardware_legacy/include \
$(TOPDIR)hardware/ril/include \
$(TOPDIR)dalvik/libnativehelper/include \
$(TOPDIR)frameworks/base/include \
$(TOPDIR)frameworks/base/opengl/include \
$(TOPDIR)external/skia/include
SRC_HOST_HEADERS:=$(TOPDIR)tools/include
SRC_LIBRARIES:= $(TOPDIR)libs
SRC_SERVERS:= $(TOPDIR)servers
SRC_TARGET_DIR := $(TOPDIR)build/target
SRC_API_DIR := $(TOPDIR)frameworks/base/api


# Some specific paths to tools
SRC_DROIDDOC_DIR := $(TOPDIR)build/tools/droiddoc


# Various mappings to avoid hard-coding paths all over the place
include $(BUILD_SYSTEM)/pathmap.mk


# ###############################################################
# Build system internal files
# ###############################################################


BUILD_COMBOS:= $(BUILD_SYSTEM)/combo


CLEAR_VARS:= $(BUILD_SYSTEM)/clear_vars.mk
BUILD_HOST_STATIC_LIBRARY:= $(BUILD_SYSTEM)/host_static_library.mk
BUILD_HOST_SHARED_LIBRARY:= $(BUILD_SYSTEM)/host_shared_library.mk
BUILD_STATIC_LIBRARY:= $(BUILD_SYSTEM)/static_library.mk
BUILD_RAW_STATIC_LIBRARY := $(BUILD_SYSTEM)/raw_static_library.mk
BUILD_SHARED_LIBRARY:= $(BUILD_SYSTEM)/shared_library.mk
BUILD_EXECUTABLE:= $(BUILD_SYSTEM)/executable.mk
BUILD_RAW_EXECUTABLE:= $(BUILD_SYSTEM)/raw_executable.mk
BUILD_HOST_EXECUTABLE:= $(BUILD_SYSTEM)/host_executable.mk
BUILD_PACKAGE:= $(BUILD_SYSTEM)/package.mk
BUILD_HOST_PREBUILT:= $(BUILD_SYSTEM)/host_prebuilt.mk
BUILD_PREBUILT:= $(BUILD_SYSTEM)/prebuilt.mk
BUILD_MULTI_PREBUILT:= $(BUILD_SYSTEM)/multi_prebuilt.mk
BUILD_JAVA_LIBRARY:= $(BUILD_SYSTEM)/java_library.mk
BUILD_STATIC_JAVA_LIBRARY:= $(BUILD_SYSTEM)/static_java_library.mk
BUILD_HOST_JAVA_LIBRARY:= $(BUILD_SYSTEM)/host_java_library.mk
BUILD_DROIDDOC:= $(BUILD_SYSTEM)/droiddoc.mk
BUILD_COPY_HEADERS := $(BUILD_SYSTEM)/copy_headers.mk
BUILD_KEY_CHAR_MAP := $(BUILD_SYSTEM)/key_char_map.mk


# ###############################################################
# Parse out any modifier targets.
# ###############################################################


# The 'showcommands' goal says to show the full command
# lines being executed, instead of a short message about
# the kind of operation being done.
SHOW_COMMANDS:= $(filter showcommands,$(MAKECMDGOALS))




# ###############################################################
# Set common values
# ###############################################################


# These can be changed to modify both host and device modules.
COMMON_GLOBAL_CFLAGS:= -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self -Wpointer-arith
COMMON_RELEASE_CFLAGS:= -DNDEBUG -UDEBUG


COMMON_GLOBAL_CPPFLAGS:= $(COMMON_GLOBAL_CFLAGS) -Wsign-promo
COMMON_RELEASE_CPPFLAGS:= $(COMMON_RELEASE_CFLAGS)


# Set the extensions used for various packages
COMMON_PACKAGE_SUFFIX := .zip
COMMON_JAVA_PACKAGE_SUFFIX := .jar
COMMON_ANDROID_PACKAGE_SUFFIX := .apk


# list of flags to turn specific warnings in to errors
TARGET_ERROR_FLAGS := -Werror=return-type -Werror=non-virtual-dtor -Werror=address -Werror=sequence-point


# TODO: do symbol compression
TARGET_COMPRESS_MODULE_SYMBOLS := false


# Default is to prelink modules.
TARGET_PRELINK_MODULE := true


# ###############################################################
# Include sub-configuration files
# ###############################################################


# ---------------------------------------------------------------
# Try to include buildspec.mk, which will try to set stuff up.
# If this file doesn't exist, the environemnt variables will
# be used, and if that doesn't work, then the default is an
# arm build
-include $(TOPDIR)buildspec.mk


# ---------------------------------------------------------------
# Define most of the global variables.  These are the ones that
# are specific to the user's build configuration.
include $(BUILD_SYSTEM)/envsetup.mk


# Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)
# or under vendor/*/$(TARGET_DEVICE).  Search in both places, but
# make sure only one exists.
# Real boards should always be associated with an OEM vendor.
board_config_mk := \
$(strip $(wildcard \
$(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
device/*/$(TARGET_DEVICE)/BoardConfig.mk \
vendor/*/$(TARGET_DEVICE)/BoardConfig.mk \
))
ifeq ($(board_config_mk),)
  $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
endif
ifneq ($(words $(board_config_mk)),1)
  $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
endif
include $(board_config_mk)
TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
board_config_mk :=


# Clean up/verify variables defined by the board config file.
TARGET_BOOTLOADER_BOARD_NAME := $(strip $(TARGET_BOOTLOADER_BOARD_NAME))
TARGET_CPU_ABI := $(strip $(TARGET_CPU_ABI))
ifeq ($(TARGET_CPU_ABI),)
  $(error No TARGET_CPU_ABI defined by board config: $(board_config_mk))
endif
TARGET_CPU_ABI2 := $(strip $(TARGET_CPU_ABI2))


# $(1): os/arch
define select-android-config-h
system/core/include/arch/$(1)/AndroidConfig.h
endef


combo_target := HOST_
include $(BUILD_SYSTEM)/combo/select.mk


# on windows, the tools have .exe at the end, and we depend on the
# host config stuff being done first


combo_target := TARGET_
include $(BUILD_SYSTEM)/combo/select.mk


# Pick a Java compiler.
include $(BUILD_SYSTEM)/combo/javac.mk


# ---------------------------------------------------------------
# Check that the configuration is current.  We check that
# BUILD_ENV_SEQUENCE_NUMBER is current against this value.
# Don't fail if we're called from envsetup, so they have a
# chance to update their environment.


ifeq (,$(strip $(CALLED_FROM_SETUP)))
ifneq (,$(strip $(BUILD_ENV_SEQUENCE_NUMBER)))
ifneq ($(BUILD_ENV_SEQUENCE_NUMBER),$(CORRECT_BUILD_ENV_SEQUENCE_NUMBER))
$(warning BUILD_ENV_SEQUENCE_NUMBER is set incorrectly.)
$(info *** If you use envsetup/lunch/

这篇关于Android.mk各项参数以及默认值文件(build/core/config.mk 及base_rules.mk)的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/964767

相关文章

Android Kotlin 高阶函数详解及其在协程中的应用小结

《AndroidKotlin高阶函数详解及其在协程中的应用小结》高阶函数是Kotlin中的一个重要特性,它能够将函数作为一等公民(First-ClassCitizen),使得代码更加简洁、灵活和可... 目录1. 引言2. 什么是高阶函数?3. 高阶函数的基础用法3.1 传递函数作为参数3.2 Lambda

Android自定义Scrollbar的两种实现方式

《Android自定义Scrollbar的两种实现方式》本文介绍两种实现自定义滚动条的方法,分别通过ItemDecoration方案和独立View方案实现滚动条定制化,文章通过代码示例讲解的非常详细,... 目录方案一:ItemDecoration实现(推荐用于RecyclerView)实现原理完整代码实现

一文带你了解SpringBoot中启动参数的各种用法

《一文带你了解SpringBoot中启动参数的各种用法》在使用SpringBoot开发应用时,我们通常需要根据不同的环境或特定需求调整启动参数,那么,SpringBoot提供了哪些方式来配置这些启动参... 目录一、启动参数的常见传递方式二、通过命令行参数传递启动参数三、使用 application.pro

基于@RequestParam注解之Spring MVC参数绑定的利器

《基于@RequestParam注解之SpringMVC参数绑定的利器》:本文主要介绍基于@RequestParam注解之SpringMVC参数绑定的利器,具有很好的参考价值,希望对大家有所帮助... 目录@RequestParam注解:Spring MVC参数绑定的利器什么是@RequestParam?@

Android App安装列表获取方法(实践方案)

《AndroidApp安装列表获取方法(实践方案)》文章介绍了Android11及以上版本获取应用列表的方案调整,包括权限配置、白名单配置和action配置三种方式,并提供了相应的Java和Kotl... 目录前言实现方案         方案概述一、 androidManifest 三种配置方式

Android WebView无法加载H5页面的常见问题和解决方法

《AndroidWebView无法加载H5页面的常见问题和解决方法》AndroidWebView是一种视图组件,使得Android应用能够显示网页内容,它基于Chromium,具备现代浏览器的许多功... 目录1. WebView 简介2. 常见问题3. 网络权限设置4. 启用 JavaScript5. D

SpringBoot接收JSON类型的参数方式

《SpringBoot接收JSON类型的参数方式》:本文主要介绍SpringBoot接收JSON类型的参数方式,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录一、jsON二、代码准备三、Apifox操作总结一、JSON在学习前端技术时,我们有讲到过JSON,而在

Android如何获取当前CPU频率和占用率

《Android如何获取当前CPU频率和占用率》最近在优化App的性能,需要获取当前CPU视频频率和占用率,所以本文小编就来和大家总结一下如何在Android中获取当前CPU频率和占用率吧... 最近在优化 App 的性能,需要获取当前 CPU视频频率和占用率,通过查询资料,大致思路如下:目前没有标准的

Maven pom.xml文件中build,plugin标签的使用小结

《Mavenpom.xml文件中build,plugin标签的使用小结》本文主要介绍了Mavenpom.xml文件中build,plugin标签的使用小结,文中通过示例代码介绍的非常详细,对大家的学... 目录<build> 标签Plugins插件<build> 标签<build> 标签是 pom.XML

JAVA虚拟机中 -D, -X, -XX ,-server参数使用

《JAVA虚拟机中-D,-X,-XX,-server参数使用》本文主要介绍了JAVA虚拟机中-D,-X,-XX,-server参数使用,文中通过示例代码介绍的非常详细,对大家的学习或者工作具有... 目录一、-D参数二、-X参数三、-XX参数总结:在Java开发过程中,对Java虚拟机(JVM)的启动参数进