本文主要是介绍putty工具命令行参数，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
文章来自：http://blog.csdn.net/five3/article/details/8115120
putty.exe [-ssh | -telnet | -rlogin | -raw] [user@]host
Example: putty -ssh -l vagrant -pw vagrant -P 2222 127.0.0.1-V print version information and exit
-pgpfp print PGP key fingerprints and exit
-v show verbose messages
-load sessname Load settings from saved session
-ssh -telnet -rlogin -raw force use of a particular protocol
-P port connect to specified port
-l user connect with specified username
-batch disable all interactive prompts The following options only apply to SSH connections: -pw passw login with specified password
-D [listen-IP:]listen-port Dynamic SOCKS-based port forwarding
-L [listen-IP:]listen-port:host:port Forward local port to remote address
-R [listen-IP:]listen-port:host:port Forward remote port to local address
-X -x enable / disable X11 forwarding
-A -a enable / disable agent forwarding
-t -T enable / disable pty allocation
-1 -2 force use of particular protocol version
-4 -6 force use of IPv4 or IPv6
-C enable compression
-i key private key file for authentication
-m file read remote command(s) from file
-s remote command is an SSH subsystem (SSH-2 only)
-N don't start a shell/command (SSH-2 only)
自动登录后执行默认的命令：
putty [-pw password] [-m file] user@ip_addr
主要在于-m参数，其后面跟着的是当前目录下存在的一个shell脚本，记住了不是在【远程】的计算上，而是在putty程序的相同目录中
这篇关于putty工具命令行参数的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
