ubuntu record samba

2024-04-18 14:18
文章标签 ubuntu record samba

本文主要是介绍ubuntu record samba,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

[1]系统设置的“用户账户”可以添加自动登录,但不能让root自动登录。

无意中打开lightdm.conf发现后面多了个“autologin-user=”,加上root就可以自动登录了。即:

autologin-user=root

ubuntu默认并没有安装ssh服务,如果通过ssh链接ubuntu,需要自己手动安装ssh-server。


1、判断是否安装ssh服务

可以通过如下命令进行:

root@ubuntu:~#ssh localhost

ssh: connect to host localhost port 22: Connection refused

2、安装ssh服务

如上所示,表示没有还没有安装,可以通过apt安装,命令如下:

root@ubuntu:~#apt-get install openssh-server

3、启动ssh服务

系统将自动进行安装,安装完成以后,先启动服务:

root@ubuntu:~#/etc/init.d/ssh start 或 service sshd start

4、查看ssh进程

启动后,可以通过如下命令查看服务是否正确启动

root@ubuntu:~#ps -e|grep ssh  

6212 ?        00:00:00 sshd  

5、更改ssh端口

如上表示启动ok。注意,ssh默认的端口是22,可以更改端口,更改后先stop,然后start就可以了。改配置在/etc/ssh/sshd_config下,如下所示。

root@ubuntu:~#vi /etc/ssh/sshd_config  

# Package generated configuration file  

# See the sshd(8) manpage for details  

# What ports, IPs and protocols we listen for

Port 22

最后,应该是连接的时候了。请看如下命令:root@ubuntu:~# ssh jiangzhi@192.168.0.100

 

 

[2]

 

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes

 

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom


[homes]
   comment = Home Directories
   browseable = no
   writable = yes




smbpasswd -a username
设置密码
重启SMB服务器
service smb restart


 

 

这篇关于ubuntu record samba的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/915014

相关文章

pico2 开发环境搭建-基于ubuntu

pico2 开发环境搭建-基于ubuntu 安装编译工具链下载sdk 和example编译example 安装编译工具链 sudo apt install cmake gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib 注意cmake的版本,需要在3.17 以上 下载sdk 和ex

MySQL record 02 part

查看已建数据库的基本信息: show CREATE DATABASE mydb; 注意,是DATABASE 不是 DATABASEs, 命令成功执行后,回显的信息有: CREATE DATABASE mydb /*!40100 DEFAULT CHARACTER SET utf8mb3 / /!80016 DEFAULT ENCRYPTION=‘N’ / CREATE DATABASE myd

在Ubuntu 20.04上安装Nginx的方法

前些天发现了一个巨牛的人工智能学习网站,通俗易懂,风趣幽默,忍不住分享一下给大家。点击跳转到网站。 简介 Nginx 是世界上最流行的 Web 服务器之一,负责托管互联网上一些最大和流量最高的网站。它是一个轻量级选择,可以用作 Web 服务器或反向代理。 在本指南中,我们将讨论如何在 Ubuntu 20.04 服务器上安装 Nginx,调整防火墙,管理 Nginx 进程,并设置服务器块以从单

虚拟机ubuntu配置opencv和opencv_contrib

前期准备  1.下载opencv和opencv_contrib源码 opencv-4.6.0:https://opencv.org/releases/ opencv_contrib-4.6.0:https://github.com/opencv/opencv_contrib 在ubuntu直接下载或者在window上下好传到虚拟机里都可以 自己找个地方把他们解压,个人习惯在home下新建一

解决ubuntu系统无法与FinalShell无法连接问题

问题 解决方案 先下载ubuntu网络工具 sudo apt install net-tools 输入密码 下载完成后进入管理员模式查看密码 sudo -i hostname -I 查看IP 得到ip地址后再继续安装 openssh-server 插件 sudo apt-get install openssh-server 问题解决 尝试连接Fina

hector_quadrotor编译总结 | ubuntu 16.04 ros-kinetic版本

hector_quadrotor编译总结 | ubuntu 16.04 ros-kinetic版本 基于Ubuntu 16.04 LTS系统所用ROS版本为 Kinetic hector_quadrotor ROS包主要用于四旋翼无人机的建模、控制和仿真。 1.安装依赖库 所需系统及依赖库 Ubuntu 16.04|ros-kinetic|Gazebo|gazebo_ros_pkgs|ge

hector_quadrotor编译总结 | ubuntu 14.04 ros-indigo版本

hector_quadrotor编译总结 | ubuntu 14.04 ros-indigo版本 基于Ubuntu 14.04 LTS系统所用ROS版本为 Indigo hector_quadrotor ROS包主要用于四旋翼无人机的建模、控制和仿真。 备注:两种安装方式可选:install the binary packages | install the source files

[轻笔记]ubuntu shell脚本切换conda环境

source /home/yourhostname/anaconda3/etc/profile.d/conda.sh # 关键!!!conda activate env_name

[轻笔记] ubuntu Shell脚本实现监视指定进程的运行状态,并能在程序崩溃后重启动该程序

根据网上博客实现,发现只能监测进程离线,然后对其进行重启;然而,脚本无法打印程序正常状态的信息。自己通过不断修改测试,发现问题主要在重启程序的命令上(需要让重启的程序在后台运行,不然会影响监视脚本进程,使其无法正常工作)。具体程序如下: #!/bin/bashwhile [ 1 ] ; dosleep 3if [ $(ps -ef|grep exe_name|grep -v grep|

SSH连接虚拟机中的Ubuntu 12.0.4

摘要:主要是解决不能使用ssh远程Ubuntu的问题、使用的远程工具是putty、也可以使用xshell、ubunut12.0.4是装在虚拟机中的、不过这个应该没有什么影响。 一:问题的出现 前两天使用VMware装了一个ubuntu12.0.4之后、因为常常使用命令行、又喜欢在虚拟机与实体机中切来切去、感觉很不方便、就想在xp中远程ubuntu、遇到了点小意外、经过一会调试解决成功、把