Redis下载安装启动官方版(ubuntu)

2024-03-24 16:08

本文主要是介绍Redis下载安装启动官方版(ubuntu),希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

下载解压

说明:官方最新版本为redis-4.0.1

$ cd &&wget http://download.redis.io/releases/redis-4.0.1.tar.gz
$ tar -xvf redis-4.0.1.tar.gz
$ cd redis-4.0.1

编译安装

见Building Redis(英语看着累的话复制下来去:https://translate.google.cn/)
——————————————-华丽的分界线———————————————-
This README is just a fast quick start document. You can find more detailed documentation at http://redis.io.

What is Redis?

Redis is often referred as a data structures server. What this means is that Redis provides access to mutable data structures via a set of commands, which are sent using a server-client model with TCP sockets and a simple protocol. So different processes can query and modify the same data structures in a shared way.

Data structures implemented into Redis have a few special properties:

  • Redis cares to store them on disk, even if they are always served and modified into the server memory. This means that Redis is fast, but that is also non-volatile.
  • Implementation of data structures stress on memory efficiency, so data structures inside Redis will likely use less memory compared to the same data structure modeled using an high level programming language.
  • Redis offers a number of features that are natural to find in a database, like replication, tunable levels of durability, cluster, high availability.

Another good example is to think of Redis as a more complex version of memcached, where the operations are not just SETs and GETs, but operations to work with complex data types like Lists, Sets, ordered data structures, and so forth.

If you want to know more, this is a list of selected starting points:

  • Introduction to Redis data types. http://redis.io/topics/data-types-intro
  • Try Redis directly inside your browser. http://try.redis.io
  • The full list of Redis commands. http://redis.io/commands
  • There is much more inside the Redis official documentation. http://redis.io/documentation

Building Redis

Redis can be compiled and used on Linux, OSX, OpenBSD, NetBSD, FreeBSD.
We support big endian and little endian architectures, and both 32 bit
and 64 bit systems.

It may compile on Solaris derived systems (for instance SmartOS) but our
support for this platform is best effort and Redis is not guaranteed to
work as well as in Linux, OSX, and *BSD there.

It is as simple as:

% make

You can run a 32 bit Redis binary using:

% make 32bit

After building Redis, it is a good idea to test it using:

% make test

Fixing build problems with dependencies or cached build options

Redis has some dependencies which are included into the deps directory.
make does not automatically rebuild dependencies even if something in
the source code of dependencies changes.

When you update the source code with git pull or when code inside the
dependencies tree is modified in any other way, make sure to use the following
command in order to really clean everything and rebuild from scratch:

make distclean

This will clean: jemalloc, lua, hiredis, linenoise.

Also if you force certain build options like 32bit target, no C compiler
optimizations (for debugging purposes), and other similar build time options,
those options are cached indefinitely until you issue a make distclean
command.

Fixing problems building 32 bit binaries

If after building Redis with a 32 bit target you need to rebuild it
with a 64 bit target, or the other way around, you need to perform a
make distclean in the root directory of the Redis distribution.

In case of build errors when trying to build a 32 bit binary of Redis, try
the following steps:

  • Install the packages libc6-dev-i386 (also try g++-multilib).
  • Try using the following command line instead of make 32bit:
    make CFLAGS="-m32 -march=native" LDFLAGS="-m32"

Allocator

Selecting a non-default memory allocator when building Redis is done by setting
the MALLOC environment variable. Redis is compiled and linked against libc
malloc by default, with the exception of jemalloc being the default on Linux
systems. This default was picked because jemalloc has proven to have fewer
fragmentation problems than libc malloc.

To force compiling against libc malloc, use:

% make MALLOC=libc

To compile against jemalloc on Mac OS X systems, use:

% make MALLOC=jemalloc

Verbose build

Redis will build with a user friendly colorized output by default.
If you want to see a more verbose output use the following:

% make V=1

Running Redis

To run Redis with the default configuration just type:

% cd src
% ./redis-server

If you want to provide your redis.conf, you have to run it using an additional
parameter (the path of the configuration file):

% cd src
% ./redis-server /path/to/redis.conf

It is possible to alter the Redis configuration by passing parameters directly
as options using the command line. Examples:

% ./redis-server --port 9999 --slaveof 127.0.0.1 6379
% ./redis-server /etc/redis/6379.conf --loglevel debug

All the options in redis.conf are also supported as options using the command
line, with exactly the same name.

Playing with Redis

You can use redis-cli to play with Redis. Start a redis-server instance,
then in another terminal try the following:

% cd src
% ./redis-cli
redis> ping
PONG
redis> set foo bar
OK
redis> get foo
"bar"
redis> incr mycounter
(integer) 1
redis> incr mycounter
(integer) 2
redis>

You can find the list of all the available commands at http://redis.io/commands.

Installing Redis

In order to install Redis binaries into /usr/local/bin just use:

% make install

You can use make PREFIX=/some/other/directory install if you wish to use a
different destination.

Make install will just install binaries in your system, but will not configure
init scripts and configuration files in the appropriate place. This is not
needed if you want just to play a bit with Redis, but if you are installing
it the proper way for a production system, we have a script doing this
for Ubuntu and Debian systems:

% cd utils
% ./install_server.sh

The script will ask you a few questions and will setup everything you need
to run Redis properly as a background daemon that will start again on
system reboots.

You’ll be able to stop and start Redis using the script named
/etc/init.d/redis_<portnumber>, for instance /etc/init.d/redis_6379.

Code contributions

Note: by contributing code to the Redis project in any form, including sending
a pull request via Github, a code fragment or patch via private email or
public discussion groups, you agree to release your code under the terms
of the BSD license that you can find in the COPYING file included in the Redis
source distribution.

Please see the CONTRIBUTING file in this source distribution for more
information.

Redis internals

If you are reading this README you are likely in front of a Github page
or you just untarred the Redis distribution tar ball. In both the cases
you are basically one step away from the source code, so here we explain
the Redis source code layout, what is in each file as a general idea, the
most important functions and structures inside the Redis server and so forth.
We keep all the discussion at a high level without digging into the details
since this document would be huge otherwise and our code base changes
continuously, but a general idea should be a good starting point to
understand more. Moreover most of the code is heavily commented and easy
to follow.

Source code layout

The Redis root directory just contains this README, the Makefile which
calls the real Makefile inside the src directory and an example
configuration for Redis and Sentinel. You can find a few shell
scripts that are used in order to execute the Redis, Redis Cluster and
Redis Sentinel unit tests, which are implemented inside the tests
directory.

Inside the root are the following important directories:

  • src: contains the Redis implementation, written in C.
  • tests: contains the unit tests, implemented in Tcl.
  • deps: contains libraries Redis uses. Everything needed to compile Redis is inside this directory; your system just needs to provide libc, a POSIX compatible interface and a C compiler. Notably deps contains a copy of jemalloc, which is the default allocator of Redis under Linux. Note that under deps there are also things which started with the Redis project, but for which the main repository is not anitrez/redis. An exception to this rule is deps/geohash-int which is the low level geocoding library used by Redis: it originated from a different project, but at this point it diverged so much that it is developed as a separated entity directly inside the Redis repository.

There are a few more directories but they are not very important for our goals
here. We’ll focus mostly on src, where the Redis implementation is contained,
exploring what there is inside each file. The order in which files are
exposed is the logical one to follow in order to disclose different layers
of complexity incrementally.

Note: lately Redis was refactored quite a bit. Function names and file
names have been changed, so you may find that this documentation reflects the
unstable branch more closely. For instance in Redis 3.0 the server.c
and server.h files were named to redis.c and redis.h. However the overall
structure is the same. Keep in mind that all the new developments and pull
requests should be performed against the unstable branch.

server.h

The simplest way to understand how a program works is to understand the
data structures it uses. So we’ll start from the main header file of
Redis, which is server.h.

All the server configuration and in general all the shared state is
defined in a global structure called server, of type struct redisServer.
A few important fields in this structure are:

  • server.db is an array of Redis databases, where data is stored.
  • server.commands is the command table.
  • server.clients is a linked list of clients connected to the server.
  • server.master is a special client, the master, if the instance is a slave.

There are tons of other fields. Most fields are commented directly inside
the structure definition.

Another important Redis data structure is the one defining a client.
In the past it was called redisClient, now just client. The structure
has many fields, here we’ll just show the main ones:

struct client {int fd;sds querybuf;int argc;robj **argv;redisDb *db;int flags;list *reply;char buf[PROTO_REPLY_CHUNK_BYTES];... many other fields ...
}

The client structure defines a connected client:

  • The fd field is the client socket file descriptor.
  • argc and argv are populated with the command the client is executing, so that functions implementing a given Redis command can read the arguments.
  • querybuf accumulates the requests from the client, which are parsed by the Redis server according to the Redis protocol and executed by calling the implementations of the commands the client is executing.
  • reply and buf are dynamic and static buffers that accumulate the replies the server sends to the client. These buffers are incrementally written to the socket as soon as the file descriptor is writable.

As you can see in the client structure above, arguments in a command
are described as robj structures. The following is the full robj
structure, which defines a Redis object:

typedef struct redisObject {unsigned type:4;unsigned encoding:4;unsigned lru:LRU_BITS; /* lru time (relative to server.lruclock) */int refcount;void *ptr;
} robj;

Basically this structure can represent all the basic Redis data types like
strings, lists, sets, sorted sets and so forth. The interesting thing is that
it has a type field, so that it is possible to know what type a given
object has, and a refcount, so that the same object can be referenced
in multiple places without allocating it multiple times. Finally the ptr
field points to the actual representation of the object, which might vary
even for the same type, depending on the encoding used.

Redis objects are used extensively in the Redis internals, however in order
to avoid the overhead of indirect accesses, recently in many places
we just use plain dynamic strings not wrapped inside a Redis object.

server.c

This is the entry point of the Redis server, where the main() function
is defined. The following are the most important steps in order to startup
the Redis server.

  • initServerConfig() setups the default values of the server structure.
  • initServer() allocates the data structures needed to operate, setup the listening socket, and so forth.
  • aeMain() starts the event loop which listens for new connections.

There are two special functions called periodically by the event loop:

  1. serverCron() is called periodically (according to server.hz frequency), and performs tasks that must be performed from time to time, like checking for timedout clients.
  2. beforeSleep() is called every time the event loop fired, Redis served a few requests, and is returning back into the event loop.

Inside server.c you can find code that handles other vital things of the Redis server:

  • call() is used in order to call a given command in the context of a given client.
  • activeExpireCycle() handles eviciton of keys with a time to live set via the EXPIRE command.
  • freeMemoryIfNeeded() is called when a new write command should be performed but Redis is out of memory according to the maxmemory directive.
  • The global variable redisCommandTable defines all the Redis commands, specifying the name of the command, the function implementing the command, the number of arguments required, and other properties of each command.

networking.c

This file defines all the I/O functions with clients, masters and slaves
(which in Redis are just special clients):

  • createClient() allocates and initializes a new client.
  • the addReply*() family of functions are used by commands implementations in order to append data to the client structure, that will be transmitted to the client as a reply for a given command executed.
  • writeToClient() transmits the data pending in the output buffers to the client and is called by the writable event handler sendReplyToClient().
  • readQueryFromClient() is the readable event handler and accumulates data from read from the client into the query buffer.
  • processInputBuffer() is the entry point in order to parse the client query buffer according to the Redis protocol. Once commands are ready to be processed, it calls processCommand() which is defined inside server.c in order to actually execute the command.
  • freeClient() deallocates, disconnects and removes a client.

aof.c and rdb.c

As you can guess from the names these files implement the RDB and AOF
persistence for Redis. Redis uses a persistence model based on the fork()
system call in order to create a thread with the same (shared) memory
content of the main Redis thread. This secondary thread dumps the content
of the memory on disk. This is used by rdb.c to create the snapshots
on disk and by aof.c in order to perform the AOF rewrite when the
append only file gets too big.

The implementation inside aof.c has additional functions in order to
implement an API that allows commands to append new commands into the AOF
file as clients execute them.

The call() function defined inside server.c is responsible to call
the functions that in turn will write the commands into the AOF.

db.c

Certain Redis commands operate on specific data types, others are general.
Examples of generic commands are DEL and EXPIRE. They operate on keys
and not on their values specifically. All those generic commands are
defined inside db.c.

Moreover db.c implements an API in order to perform certain operations
on the Redis dataset without directly accessing the internal data structures.

The most important functions inside db.c which are used in many commands
implementations are the following:

  • lookupKeyRead() and lookupKeyWrite() are used in order to get a pointer to the value associated to a given key, or NULL if the key does not exist.
  • dbAdd() and its higher level counterpart setKey() create a new key in a Redis database.
  • dbDelete() removes a key and its associated value.
  • emptyDb() removes an entire single database or all the databases defined.

The rest of the file implements the generic commands exposed to the client.

object.c

The robj structure defining Redis objects was already described. Inside
object.c there are all the functions that operate with Redis objects at
a basic level, like functions to allocate new objects, handle the reference
counting and so forth. Notable functions inside this file:

  • incrRefcount() and decrRefCount() are used in order to increment or decrement an object reference count. When it drops to 0 the object is finally freed.
  • createObject() allocates a new object. There are also specialized functions to allocate string objects having a specific content, like createStringObjectFromLongLong() and similar functions.

This file also implements the OBJECT command.

replication.c

This is one of the most complex files inside Redis, it is recommended to
approach it only after getting a bit familiar with the rest of the code base.
In this file there is the implementation of both the master and slave role
of Redis.

One of the most important functions inside this file is replicationFeedSlaves() that writes commands to the clients representing slave instances connected
to our master, so that the slaves can get the writes performed by the clients:
this way their data set will remain synchronized with the one in the master.

This file also implements both the SYNC and PSYNC commands that are
used in order to perform the first synchronization between masters and
slaves, or to continue the replication after a disconnection.

Other C files

  • t_hash.c, t_list.c, t_set.c, t_string.c and t_zset.c contains the implementation of the Redis data types. They implement both an API to access a given data type, and the client commands implementations for these data types.
  • ae.c implements the Redis event loop, it’s a self contained library which is simple to read and understand.
  • sds.c is the Redis string library, check http://github.com/antirez/sds for more information.
  • anet.c is a library to use POSIX networking in a simpler way compared to the raw interface exposed by the kernel.
  • dict.c is an implementation of a non-blocking hash table which rehashes incrementally.
  • scripting.c implements Lua scripting. It is completely self contained from the rest of the Redis implementation and is simple enough to understand if you are familar with the Lua API.
  • cluster.c implements the Redis Cluster. Probably a good read only after being very familiar with the rest of the Redis code base. If you want to read cluster.c make sure to read the Redis Cluster specification.

Anatomy of a Redis command

All the Redis commands are defined in the following way:

void foobarCommand(client *c) {printf("%s",c->argv[1]->ptr); /* Do something with the argument. */addReply(c,shared.ok); /* Reply something to the client. */
}

The command is then referenced inside server.c in the command table:

{"foobar",foobarCommand,2,"rtF",0,NULL,0,0,0,0,0},

In the above example 2 is the number of arguments the command takes,
while "rtF" are the command flags, as documented in the command table
top comment inside server.c.

After the command operates in some way, it returns a reply to the client,
usually using addReply() or a similar function defined inside networking.c.

There are tons of commands implementations inside th Redis source code
that can serve as examples of actual commands implementations. To write
a few toy commands can be a good exercise to familiarize with the code base.

There are also many other files not described here, but it is useless to
cover everything. We want to just help you with the first steps.
Eventually you’ll find your way inside the Redis code base :-)

Enjoy!

——————————————-华丽的分界线———————————————-
看完辣嘛,其实就是文件夹中的README.md文件,不懂的话欢迎留言!

这篇关于Redis下载安装启动官方版(ubuntu)的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/842095

相关文章

MySQL数据库宕机,启动不起来,教你一招搞定!

作者介绍:老苏,10余年DBA工作运维经验,擅长Oracle、MySQL、PG、Mongodb数据库运维(如安装迁移,性能优化、故障应急处理等)公众号:老苏畅谈运维欢迎关注本人公众号,更多精彩与您分享。 MySQL数据库宕机,数据页损坏问题,启动不起来,该如何排查和解决,本文将为你说明具体的排查过程。 查看MySQL error日志 查看 MySQL error日志,排查哪个表(表空间

springboot3打包成war包,用tomcat8启动

1、在pom中,将打包类型改为war <packaging>war</packaging> 2、pom中排除SpringBoot内置的Tomcat容器并添加Tomcat依赖,用于编译和测试,         *依赖时一定设置 scope 为 provided (相当于 tomcat 依赖只在本地运行和测试的时候有效,         打包的时候会排除这个依赖)<scope>provided

内核启动时减少log的方式

内核引导选项 内核引导选项大体上可以分为两类:一类与设备无关、另一类与设备有关。与设备有关的引导选项多如牛毛,需要你自己阅读内核中的相应驱动程序源码以获取其能够接受的引导选项。比如,如果你想知道可以向 AHA1542 SCSI 驱动程序传递哪些引导选项,那么就查看 drivers/scsi/aha1542.c 文件,一般在前面 100 行注释里就可以找到所接受的引导选项说明。大多数选项是通过"_

零基础学习Redis(10) -- zset类型命令使用

zset是有序集合,内部除了存储元素外,还会存储一个score,存储在zset中的元素会按照score的大小升序排列,不同元素的score可以重复,score相同的元素会按照元素的字典序排列。 1. zset常用命令 1.1 zadd  zadd key [NX | XX] [GT | LT]   [CH] [INCR] score member [score member ...]

用命令行的方式启动.netcore webapi

用命令行的方式启动.netcore web项目 进入指定的项目文件夹,比如我发布后的代码放在下面文件夹中 在此地址栏中输入“cmd”,打开命令提示符,进入到发布代码目录 命令行启动.netcore项目的命令为:  dotnet 项目启动文件.dll --urls="http://*:对外端口" --ip="本机ip" --port=项目内部端口 例: dotnet Imagine.M

Linux服务器Java启动脚本

Linux服务器Java启动脚本 1、初版2、优化版本3、常用脚本仓库 本文章介绍了如何在Linux服务器上执行Java并启动jar包, 通常我们会使用nohup直接启动,但是还是需要手动停止然后再次启动, 那如何更优雅的在服务器上启动jar包呢,让我们一起探讨一下吧。 1、初版 第一个版本是常用的做法,直接使用nohup后台启动jar包, 并将日志输出到当前文件夹n

pico2 开发环境搭建-基于ubuntu

pico2 开发环境搭建-基于ubuntu 安装编译工具链下载sdk 和example编译example 安装编译工具链 sudo apt install cmake gcc-arm-none-eabi libnewlib-arm-none-eabi libstdc++-arm-none-eabi-newlib 注意cmake的版本,需要在3.17 以上 下载sdk 和ex

衡石分析平台使用手册-单机安装及启动

单机安装及启动​ 本文讲述如何在单机环境下进行 HENGSHI SENSE 安装的操作过程。 在安装前请确认网络环境,如果是隔离环境,无法连接互联网时,请先按照 离线环境安装依赖的指导进行依赖包的安装,然后按照本文的指导继续操作。如果网络环境可以连接互联网,请直接按照本文的指导进行安装。 准备工作​ 请参考安装环境文档准备安装环境。 配置用户与安装目录。 在操作前请检查您是否有 sud

SpringBoot项目是如何启动

启动步骤 概念 运行main方法,初始化SpringApplication 从spring.factories读取listener ApplicationContentInitializer运行run方法读取环境变量,配置信息创建SpringApplication上下文预初始化上下文,将启动类作为配置类进行读取调用 refresh 加载 IOC容器,加载所有的自动配置类,创建容器在这个过程

嵌入式Openharmony系统构建与启动详解

大家好,今天主要给大家分享一下,如何构建Openharmony子系统以及系统的启动过程分解。 第一:OpenHarmony系统构建      首先熟悉一下,构建系统是一种自动化处理工具的集合,通过将源代码文件进行一系列处理,最终生成和用户可以使用的目标文件。这里的目标文件包括静态链接库文件、动态链接库文件、可执行文件、脚本文件、配置文件等。      我们在编写hellowor