本文主要是介绍HCIP第六天 ospf分流,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!
配置IP
[r1]int l 1
[r1-LoopBack1]ip ad 10.1.1.1 24
[r1-LoopBack1]int lo2
[r1-LoopBack2]ip ad 10.2.1.1 24
[r1-GigabitEthernet0/0/1]ip ad 192.168.1.1 24
[r1-GigabitEthernet0/0/1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip ad 192.168.2.1 24
[r2]int l 1
[r2-LoopBack1]ip ad 10.1.2.0 24
[r2-LoopBack1]int lo2
[r2-LoopBack2]ip ad 10.2.2.0 24
[r2-LoopBack2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip ad 192.168.2.2 24
[r2-GigabitEthernet0/0/0]int g 0/0/1
[r2-GigabitEthernet0/0/1]ip ad 192.168.3.1 24
[r5]int l 1
[r5-LoopBack1]ip ad 10.1.5.0 24
[r5-LoopBack1]int lo2
[r5-LoopBack2]ip ad 10.2.5.0 24
[r5-LoopBack2]int g 0/0/1
[r5-
这篇关于HCIP第六天 ospf分流的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!