本文主要是介绍ubuntu下安装skyeye,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!
ubuntu10.04LTS下安装skyeye
1.首先安装skyeye的依赖包,比如gtk的依赖,一般 Ubuntu 都默认安装了,稳妥起见,运行下面的代码:
sudo apt-get install libgtk2.0-dev pkg-config libatk1.0-dev libpango1.0-dev libfreetype6-dev libglib2.0-dev libx11-dev binutils-dev |
2.安装skyeye
sudo apt-get install skyeye |
3.在终端下执行skyeye,运行出错
skyeye: error while loading shared libraries: libbfd-2.19.90.20090909.so: cannot open shared object file: No such file or directory |
在ubuntu 10.04LTS中,libbfd的版本是libbfd-2.20.1-system.20100303.so,把libbfd-2.20.1-system.20100303.so拷贝一份,然后将文件名改成libbfd- 2.19.90.20090909.so就可以了。libbfd-2.20.1-system.20100303.so在/usr/lib目录下。
sudo cp /usr/lib/libbfd-2.20.1-system.20100303.so /usr/lib/libbfd-2.19.90.20090909.so
sudo mv /usr/lib/libbfd-2.20.1-system.20100303.so /usr/lib/libbfd-2.20.so.bak |
然后终端下输入skyeye,得到如下启动信息:
**************************** WARNING ********************************** If you want to run ELF image, you should use -e option to indicate your elf-format image filename. Or you only want to run binary image, you need to set the filename of the image and its entry in skyeye.conf. ***********************************************************************
Your elf file is little endian. Failed to open skyeye config file skyeye.conf in the same directory error: No such file or directory SkyEye 1.2.5 Bug report: skyeye-developer@lists.gro.clinux.org Usage: skyeye [options] -e program [program args] Default mode is STANDALONE mode ------------------------------------------------------------------ Options: -e exec-file the (ELF executable format)kernel file name. -l load_address,load_address_mask Load ELF file to another address, not its entry. -b specify the data type is big endian when non "-e" option. -d in GDB Server mode (can be connected by GDB). -c config-file the skyeye configure file name. -h The SkyEye command options, and ARCHs and CPUs simulated. ------------------------------------------------------------------ ----------- Architectures and CPUs simulated by SkyEye------------- -------- ARM architectures --------- at91 lpc s3c4510b s3c44b0x s3c44b0 s3c3410x ep7312 lh79520 ep9312 cs89712 sa1100 pxa_lubbock pxa_mainstone at91rm92 s3c2410x s3c2440 sharp_lh7a400 ns9750 -------- BlackFin architectures ---- bf533 bf537 |
启动成功。。。
这篇关于ubuntu下安装skyeye的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!