本文主要是介绍aes-ecb源码，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
头文件：
#pragma once#ifndef _AES_H_
#define _AES_H_#include <stdint.h>// #define the macros below to 1/0 to enable/disable the mode of operation.
//
// CBC enables AES encryption in CBC-mode of operation.
// CTR enables encryption in counter-mode.
// ECB enables the basic ECB 16-byte block algorithm. All can be enabled simultaneously.// The #ifndef-guard allows it to be configured before #include'ing or at compile time.
#ifndef CBC
// #define CBC 1
#define CBC 0 // 2020-07-27 by cui
#endif#ifndef ECB
#define ECB 1
#endif#ifndef CTR
// #define CTR 1
#define CTR 0 //2020-07-27 by cui
#endif#define AES128 1
//#define AES192 1
//#define AES256 1#define AES_BLOCKLEN 16 // Block length in bytes - AES is 128b block only#if defined(AES256) && (AES256 == 1)
#define AES_KEYLEN 32
#define AES_keyExpSize 240
#elif defined(AES192) && (AES192 == 1)
#define AES_KEYLEN 24
#define AES_keyExpSize 208
#else
#define AES_KEYLEN 16 // Key length in bytes
#define AES_keyExpSize 176
#endifstruct AES_ctx
{uint8_t RoundKey[AES_keyExpSize];
#if (defined(CBC) && (CBC == 1)) || (defined(CTR) && (CTR == 1))uint8_t Iv[AES_BLOCKLEN];
#endif
};void AES_init_ctx(struct AES_ctx* ctx, const uint8_t* key);
#if (defined(CBC) && (CBC == 1)) || (defined(CTR) && (CTR == 1))
void AES_init_ctx_iv(struct AES_ctx* ctx, const uint8_t* key, const uint8_t* iv);
void AES_ctx_set_iv(struct AES_ctx* ctx, const uint8_t* iv);
#endif#if defined(ECB) && (ECB == 1)
// buffer size is exactly AES_BLOCKLEN bytes;
// you need only AES_init_ctx as IV is not used in ECB
// NB: ECB is considered insecure for most uses
void AES_ECB_encrypt(const struct AES_ctx* ctx, uint8_t* buf);
void AES_ECB_decrypt(const struct AES_ctx* ctx, uint8_t* buf);#endif // #if defined(ECB) && (ECB == !)#if defined(CBC) && (CBC == 1)
// buffer size MUST be mutile of AES_BLOCKLEN;
// Suggest https://en.wikipedia.org/wiki/Padding_(cryptography)#PKCS7 for padding scheme
// NOTES: you need to set IV in ctx via AES_init_ctx_iv() or AES_ctx_set_iv()
// no IV should ever be reused with the same key
void AES_CBC_encrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);
void AES_CBC_decrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);#endif // #if defined(CBC) && (CBC == 1)#if defined(CTR) && (CTR == 1)// Same function for encrypting as for decrypting.
// IV is incremented for every block, and used after encryption as XOR-compliment for output
// Suggesting https://en.wikipedia.org/wiki/Padding_(cryptography)#PKCS7 for padding scheme
// NOTES: you need to set IV in ctx with AES_init_ctx_iv() or AES_ctx_set_iv()
// no IV should ever be reused with the same key
void AES_CTR_xcrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length);#endif // #if defined(CTR) && (CTR == 1)#endif // _AES_H_源码：
/*This is an implementation of the AES algorithm, specifically ECB, CTR and CBC mode.
Block size can be chosen in aes.h - available choices are AES128, AES192, AES256.The implementation is verified against the test vectors in:National Institute of Standards and Technology Special Publication 800-38A 2001 EDECB-AES128
----------plain-text:6bc1bee22e409f96e93d7e117393172aae2d8a571e03ac9c9eb76fac45af8e5130c81c46a35ce411e5fbc1191a0a52eff69f2445df4f9b17ad2b417be66c3710key:2b7e151628aed2a6abf7158809cf4f3cresulting cipher3ad77bb40d7a3660a89ecaf32466ef97f5d3d58503b9699de785895a96fdbaaf43b1cd7f598ece23881b00e3ed0306887b0c785e27e8ad3f8223207104725dd4NOTE: String length must be evenly divisible by 16byte (str_len % 16 == 0)You should pad the end of the string with zeros if this is not the case.For AES192/256 the key size is proportionally larger.*//*****************************************************************************/
/* Includes: */
/*****************************************************************************/
#include <string.h> // CBC mode, for memset
#include "aes.h"/*****************************************************************************/
/* Defines: */
/*****************************************************************************/
// The number of columns comprising a state in AES. This is a constant in AES. Value=4
#define Nb 4#if defined(AES256) && (AES256 == 1)
#define Nk 8
#define Nr 14
#elif defined(AES192) && (AES192 == 1)
#define Nk 6
#define Nr 12
#else
#define Nk 4 // The number of 32 bit words in a key.
#define Nr 10 // The number of rounds in AES Cipher.
#endif// jcallan@github points out that declaring Multiply as a function
// reduces code size considerably with the Keil ARM compiler.
// See this link for more information: https://github.com/kokke/tiny-AES-C/pull/3
#ifndef MULTIPLY_AS_A_FUNCTION
#define MULTIPLY_AS_A_FUNCTION 0
#endif/*****************************************************************************/
/* Private variables: */
/*****************************************************************************/
// state - array holding the intermediate results during decryption.
typedef uint8_t state_t[4][4];// The lookup-tables are marked const so they can be placed in read-only storage instead of RAM
// The numbers below can be computed dynamically trading ROM for RAM -
// This can be useful in (embedded) bootloader applications, where ROM is often limited.
static const uint8_t sbox[256] = {//0 1 2 3 4 5 6 7 8 9 A B C D E F0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 };static const uint8_t rsbox[256] = {0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38, 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87, 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb,0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d, 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e,0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2, 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25,0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92,0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda, 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84,0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a, 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06,0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02, 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b,0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea, 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73,0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85, 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e,0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89, 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b,0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20, 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4,0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31, 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f,0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d, 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef,0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0, 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61,0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26, 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d };// The round constant word array, Rcon[i], contains the values given by
// x to the power (i-1) being powers of x (x is denoted as {02}) in the field GF(2^8)
static const uint8_t Rcon[11] = {0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36 };/*
* Jordan Goulder points out in PR #12 (https://github.com/kokke/tiny-AES-C/pull/12),
* that you can remove most of the elements in the Rcon array, because they are unused.
*
* From Wikipedia's article on the Rijndael key schedule @ https://en.wikipedia.org/wiki/Rijndael_key_schedule#Rcon
*
* "Only the first some of these constants are actually used – up to rcon[10] for AES-128 (as 11 round keys are needed),
* up to rcon[8] for AES-192, up to rcon[7] for AES-256. rcon[0] is not used in AES algorithm."
*//*****************************************************************************/
/* Private functions: */
/*****************************************************************************/
/*
static uint8_t getSBoxValue(uint8_t num)
{return sbox[num];
}
*/
#define getSBoxValue(num) (sbox[(num)])
/*
static uint8_t getSBoxInvert(uint8_t num)
{return rsbox[num];
}
*/
#define getSBoxInvert(num) (rsbox[(num)])// This function produces Nb(Nr+1) round keys. The round keys are used in each round to decrypt the states.
static void KeyExpansion(uint8_t* RoundKey, const uint8_t* Key)
{unsigned i, j, k;uint8_t tempa[4]; // Used for the column/row operations// The first round key is the key itself.for (i = 0; i < Nk; ++i){RoundKey[(i * 4) + 0] = Key[(i * 4) + 0];RoundKey[(i * 4) + 1] = Key[(i * 4) + 1];RoundKey[(i * 4) + 2] = Key[(i * 4) + 2];RoundKey[(i * 4) + 3] = Key[(i * 4) + 3];}// All other round keys are found from the previous round keys.for (i = Nk; i < Nb * (Nr + 1); ++i){{k = (i - 1) * 4;tempa[0] = RoundKey[k + 0];tempa[1] = RoundKey[k + 1];tempa[2] = RoundKey[k + 2];tempa[3] = RoundKey[k + 3];}if (i % Nk == 0){// This function shifts the 4 bytes in a word to the left once.// [a0,a1,a2,a3] becomes [a1,a2,a3,a0]// Function RotWord(){const uint8_t u8tmp = tempa[0];tempa[0] = tempa[1];tempa[1] = tempa[2];tempa[2] = tempa[3];tempa[3] = u8tmp;}// SubWord() is a function that takes a four-byte input word and// applies the S-box to each of the four bytes to produce an output word.// Function Subword(){tempa[0] = getSBoxValue(tempa[0]);tempa[1] = getSBoxValue(tempa[1]);tempa[2] = getSBoxValue(tempa[2]);tempa[3] = getSBoxValue(tempa[3]);}tempa[0] = tempa[0] ^ Rcon[i / Nk];}
#if defined(AES256) && (AES256 == 1)if (i % Nk == 4){// Function Subword(){tempa[0] = getSBoxValue(tempa[0]);tempa[1] = getSBoxValue(tempa[1]);tempa[2] = getSBoxValue(tempa[2]);tempa[3] = getSBoxValue(tempa[3]);}}
#endifj = i * 4; k = (i - Nk) * 4;RoundKey[j + 0] = RoundKey[k + 0] ^ tempa[0];RoundKey[j + 1] = RoundKey[k + 1] ^ tempa[1];RoundKey[j + 2] = RoundKey[k + 2] ^ tempa[2];RoundKey[j + 3] = RoundKey[k + 3] ^ tempa[3];}
}void AES_init_ctx(struct AES_ctx* ctx, const uint8_t* key)
{KeyExpansion(ctx->RoundKey, key);
}
#if (defined(CBC) && (CBC == 1)) || (defined(CTR) && (CTR == 1))
void AES_init_ctx_iv(struct AES_ctx* ctx, const uint8_t* key, const uint8_t* iv)
{KeyExpansion(ctx->RoundKey, key);memcpy(ctx->Iv, iv, AES_BLOCKLEN);
}
void AES_ctx_set_iv(struct AES_ctx* ctx, const uint8_t* iv)
{memcpy(ctx->Iv, iv, AES_BLOCKLEN);
}
#endif// This function adds the round key to state.
// The round key is added to the state by an XOR function.
static void AddRoundKey(uint8_t round, state_t* state, const uint8_t* RoundKey)
{uint8_t i, j;for (i = 0; i < 4; ++i){for (j = 0; j < 4; ++j){(*state)[i][j] ^= RoundKey[(round * Nb * 4) + (i * Nb) + j];}}
}// The SubBytes Function Substitutes the values in the
// state matrix with values in an S-box.
static void SubBytes(state_t* state)
{uint8_t i, j;for (i = 0; i < 4; ++i){for (j = 0; j < 4; ++j){(*state)[j][i] = getSBoxValue((*state)[j][i]);}}
}// The ShiftRows() function shifts the rows in the state to the left.
// Each row is shifted with different offset.
// Offset = Row number. So the first row is not shifted.
static void ShiftRows(state_t* state)
{uint8_t temp;// Rotate first row 1 columns to lefttemp = (*state)[0][1];(*state)[0][1] = (*state)[1][1];(*state)[1][1] = (*state)[2][1];(*state)[2][1] = (*state)[3][1];(*state)[3][1] = temp;// Rotate second row 2 columns to lefttemp = (*state)[0][2];(*state)[0][2] = (*state)[2][2];(*state)[2][2] = temp;temp = (*state)[1][2];(*state)[1][2] = (*state)[3][2];(*state)[3][2] = temp;// Rotate third row 3 columns to lefttemp = (*state)[0][3];(*state)[0][3] = (*state)[3][3];(*state)[3][3] = (*state)[2][3];(*state)[2][3] = (*state)[1][3];(*state)[1][3] = temp;
}static uint8_t xtime(uint8_t x)
{return ((x << 1) ^ (((x >> 7) & 1) * 0x1b));
}// MixColumns function mixes the columns of the state matrix
static void MixColumns(state_t* state)
{uint8_t i;uint8_t Tmp, Tm, t;for (i = 0; i < 4; ++i){t = (*state)[i][0];Tmp = (*state)[i][0] ^ (*state)[i][1] ^ (*state)[i][2] ^ (*state)[i][3];Tm = (*state)[i][0] ^ (*state)[i][1]; Tm = xtime(Tm); (*state)[i][0] ^= Tm ^ Tmp;Tm = (*state)[i][1] ^ (*state)[i][2]; Tm = xtime(Tm); (*state)[i][1] ^= Tm ^ Tmp;Tm = (*state)[i][2] ^ (*state)[i][3]; Tm = xtime(Tm); (*state)[i][2] ^= Tm ^ Tmp;Tm = (*state)[i][3] ^ t; Tm = xtime(Tm); (*state)[i][3] ^= Tm ^ Tmp;}
}// Multiply is used to multiply numbers in the field GF(2^8)
// Note: The last call to xtime() is unneeded, but often ends up generating a smaller binary
// The compiler seems to be able to vectorize the operation better this way.
// See https://github.com/kokke/tiny-AES-c/pull/34
#if MULTIPLY_AS_A_FUNCTION
static uint8_t Multiply(uint8_t x, uint8_t y)
{return (((y & 1) * x) ^((y >> 1 & 1) * xtime(x)) ^((y >> 2 & 1) * xtime(xtime(x))) ^((y >> 3 & 1) * xtime(xtime(xtime(x)))) ^((y >> 4 & 1) * xtime(xtime(xtime(xtime(x)))))); /* this last call to xtime() can be omitted */
}
#else
#define Multiply(x, y) \( ((y & 1) * x) ^ \((y>>1 & 1) * xtime(x)) ^ \((y>>2 & 1) * xtime(xtime(x))) ^ \((y>>3 & 1) * xtime(xtime(xtime(x)))) ^ \((y>>4 & 1) * xtime(xtime(xtime(xtime(x)))))) \
#endif#if (defined(CBC) && CBC == 1) || (defined(ECB) && ECB == 1)
// MixColumns function mixes the columns of the state matrix.
// The method used to multiply may be difficult to understand for the inexperienced.
// Please use the references to gain more information.
static void InvMixColumns(state_t* state)
{int i;uint8_t a, b, c, d;for (i = 0; i < 4; ++i){a = (*state)[i][0];b = (*state)[i][1];c = (*state)[i][2];d = (*state)[i][3];(*state)[i][0] = Multiply(a, 0x0e) ^ Multiply(b, 0x0b) ^ Multiply(c, 0x0d) ^ Multiply(d, 0x09);(*state)[i][1] = Multiply(a, 0x09) ^ Multiply(b, 0x0e) ^ Multiply(c, 0x0b) ^ Multiply(d, 0x0d);(*state)[i][2] = Multiply(a, 0x0d) ^ Multiply(b, 0x09) ^ Multiply(c, 0x0e) ^ Multiply(d, 0x0b);(*state)[i][3] = Multiply(a, 0x0b) ^ Multiply(b, 0x0d) ^ Multiply(c, 0x09) ^ Multiply(d, 0x0e);}
}// The SubBytes Function Substitutes the values in the
// state matrix with values in an S-box.
static void InvSubBytes(state_t* state)
{uint8_t i, j;for (i = 0; i < 4; ++i){for (j = 0; j < 4; ++j){(*state)[j][i] = getSBoxInvert((*state)[j][i]);}}
}static void InvShiftRows(state_t* state)
{uint8_t temp;// Rotate first row 1 columns to righttemp = (*state)[3][1];(*state)[3][1] = (*state)[2][1];(*state)[2][1] = (*state)[1][1];(*state)[1][1] = (*state)[0][1];(*state)[0][1] = temp;// Rotate second row 2 columns to righttemp = (*state)[0][2];(*state)[0][2] = (*state)[2][2];(*state)[2][2] = temp;temp = (*state)[1][2];(*state)[1][2] = (*state)[3][2];(*state)[3][2] = temp;// Rotate third row 3 columns to righttemp = (*state)[0][3];(*state)[0][3] = (*state)[1][3];(*state)[1][3] = (*state)[2][3];(*state)[2][3] = (*state)[3][3];(*state)[3][3] = temp;
}
#endif // #if (defined(CBC) && CBC == 1) || (defined(ECB) && ECB == 1)// Cipher is the main function that encrypts the PlainText.
static void Cipher(state_t* state, const uint8_t* RoundKey)
{uint8_t round = 0;// Add the First round key to the state before starting the rounds.AddRoundKey(0, state, RoundKey);// There will be Nr rounds.// The first Nr-1 rounds are identical.// These Nr rounds are executed in the loop below.// Last one without MixColumns()for (round = 1; ; ++round){SubBytes(state);ShiftRows(state);if (round == Nr) {break;}MixColumns(state);AddRoundKey(round, state, RoundKey);}// Add round key to last roundAddRoundKey(Nr, state, RoundKey);
}#if (defined(CBC) && CBC == 1) || (defined(ECB) && ECB == 1)
static void InvCipher(state_t* state, const uint8_t* RoundKey)
{uint8_t round = 0;// Add the First round key to the state before starting the rounds.AddRoundKey(Nr, state, RoundKey);// There will be Nr rounds.// The first Nr-1 rounds are identical.// These Nr rounds are executed in the loop below.// Last one without InvMixColumn()for (round = (Nr - 1); ; --round){InvShiftRows(state);InvSubBytes(state);AddRoundKey(round, state, RoundKey);if (round == 0) {break;}InvMixColumns(state);}}
#endif // #if (defined(CBC) && CBC == 1) || (defined(ECB) && ECB == 1)/*****************************************************************************/
/* Public functions: */
/*****************************************************************************/
#if defined(ECB) && (ECB == 1)void AES_ECB_encrypt(const struct AES_ctx* ctx, uint8_t* buf)
{// The next function call encrypts the PlainText with the Key using AES algorithm.Cipher((state_t*)buf, ctx->RoundKey);
}void AES_ECB_decrypt(const struct AES_ctx* ctx, uint8_t* buf)
{// The next function call decrypts the PlainText with the Key using AES algorithm.InvCipher((state_t*)buf, ctx->RoundKey);
}#endif // #if defined(ECB) && (ECB == 1)#if defined(CBC) && (CBC == 1)static void XorWithIv(uint8_t* buf, const uint8_t* Iv)
{uint8_t i;for (i = 0; i < AES_BLOCKLEN; ++i) // The block in AES is always 128bit no matter the key size{buf[i] ^= Iv[i];}
}void AES_CBC_encrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length)
{uintptr_t i;uint8_t* Iv = ctx->Iv;for (i = 0; i < length; i += AES_BLOCKLEN){XorWithIv(buf, Iv);Cipher((state_t*)buf, ctx->RoundKey);Iv = buf;buf += AES_BLOCKLEN;}/* store Iv in ctx for next call */memcpy(ctx->Iv, Iv, AES_BLOCKLEN);
}void AES_CBC_decrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length)
{uintptr_t i;uint8_t storeNextIv[AES_BLOCKLEN];for (i = 0; i < length; i += AES_BLOCKLEN){memcpy(storeNextIv, buf, AES_BLOCKLEN);InvCipher((state_t*)buf, ctx->RoundKey);XorWithIv(buf, ctx->Iv);memcpy(ctx->Iv, storeNextIv, AES_BLOCKLEN);buf += AES_BLOCKLEN;}}#endif // #if defined(CBC) && (CBC == 1)#if defined(CTR) && (CTR == 1)/* Symmetrical operation: same function for encrypting as for decrypting. Note any IV/nonce should never be reused with the same key */
void AES_CTR_xcrypt_buffer(struct AES_ctx* ctx, uint8_t* buf, uint32_t length)
{uint8_t buffer[AES_BLOCKLEN];unsigned i;int bi;for (i = 0, bi = AES_BLOCKLEN; i < length; ++i, ++bi){if (bi == AES_BLOCKLEN) /* we need to regen xor compliment in buffer */{memcpy(buffer, ctx->Iv, AES_BLOCKLEN);Cipher((state_t*)buffer, ctx->RoundKey);/* Increment Iv and handle overflow */for (bi = (AES_BLOCKLEN - 1); bi >= 0; --bi){/* inc will overflow */if (ctx->Iv[bi] == 255){ctx->Iv[bi] = 0;continue;}ctx->Iv[bi] += 1;break;}bi = 0;}buf[i] = (buf[i] ^ buffer[bi]);}
}#endif // #if defined(CTR) && (CTR == 1)例子：
#include <windows.h>#include "aes.h"#include "base64.h"int str2hex(unsigned char* data, int len, unsigned char* dst) {int dstlen = 0;for (int i = 0; i < len; i+=2) {unsigned char low = data[i+1];unsigned char high = data[i ];if (low >= 'a' && low <= 'f') {low -= 0x20;}if (low >= 'A' && low <= 'F') {low -= 7;low -= 0x30;}else {low -= 0x30;}if (high >= 'a' && high <= 'f') {high -= 0x20;}if (high >= 'A' && high <= 'F') {high -= 7;high -= 0x30;}else {high -= 0x30;}dst[dstlen++] = (high << 4) + low;}return dstlen;
}int hex2str(unsigned char* data, int len, unsigned char* dst,int lowercase) {int dstlen = 0;for (int i = 0; i < len; i++) {unsigned char c = data[i ];unsigned low = c & 0xf;unsigned high = c >> 4;if (high > 9) {high += 0x30;high += 7;if (lowercase) {high += 0x20;}}else{high += 0x30;}if (low > 9) {low += 0x30;low += 7;if (lowercase) {low += 0x20;}}else {low += 0x30;}dst[dstlen++] = high;dst[dstlen++] = low;}return dstlen;
}string encrypt(const unsigned char * data,int datalen) {unsigned char* dst = new unsigned char[datalen + 16];memset(dst, 0, datalen);int complement_len = 16 - (datalen % 16);lstrcpyA((char*)dst, (char*)data);for (int i = 0; i < complement_len; i++) {*(dst + datalen + i) = complement_len;}int totallen = datalen + complement_len;//memcpy(dst + datalen, "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c", 12);struct AES_ctx aes_s = { 0 };char key[17] = "fe44sgrdawedwxd8";AES_init_ctx(&aes_s,(unsigned char*) key); //AES_ECB_encrypt(&aes_s, en_msg); // 加密后的密文覆盖掉原有的 en_msg//AES_ECB_decrypt(&aes_s, en_msg); // 解密后的明文覆盖掉原有的 de_msg/* 特别注意，本算法一次只能加密16个字节，多于16个字节的加解密需要分多次调用实现 */int cnt = datalen % 16;if (cnt) {cnt = datalen / 16 + 1;}else {cnt = datalen / 16;}unsigned char* ptr = (unsigned char*)dst;for (int i = 0;i< cnt; i++) {AES_ECB_encrypt(&aes_s, ptr);ptr += 16;}unsigned char* strbuf = new unsigned char[(datalen + complement_len) * 2 + 16];memset(strbuf, 0, (datalen + complement_len) * 2 + 16);int hexstrlen = hex2str(dst, totallen, strbuf,1);printf("%s\r\n", strbuf);string base64 = base64_encode(strbuf, hexstrlen);printf("%s\r\n", base64.c_str());return base64;
}int decrypt(const unsigned char* data, int datalen,unsigned char * dst) {unsigned char* decodebuf = new unsigned char [datalen];int decodelen = base64_decode((unsigned char*)data, datalen, decodebuf);decodebuf[decodelen] = 0;printf("%s\r\n", decodebuf);unsigned char* hexbuf = new unsigned char[datalen];memset(hexbuf, 0, datalen);int hexlen = str2hex((unsigned char*)decodebuf, decodelen, hexbuf);int complement_len = 16 - (hexlen % 16);int totallen = hexlen + complement_len;memset(dst, 0, totallen);memcpy((char*)dst, (char*)hexbuf,hexlen);for (int i = 0; i < complement_len; i++) {*(dst + hexlen + i) = complement_len;}//memcpy(dst + datalen, "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c", 12);struct AES_ctx aes_s = { 0 };char key[17] = "fe44sgrdawedwxd8";AES_init_ctx(&aes_s, (unsigned char*)key);//AES_ECB_encrypt(&aes_s, en_msg); // 加密后的密文覆盖掉原有的 en_msg//AES_ECB_decrypt(&aes_s, en_msg); // 解密后的明文覆盖掉原有的 de_msg/* 特别注意，本算法一次只能加密16个字节，多于16个字节的加解密需要分多次调用实现 */int cnt = hexlen % 16;if (cnt) {cnt = hexlen / 16 + 1;}else {cnt = hexlen / 16;}unsigned char* ptr = (unsigned char*)dst;for (int i = 0; i < cnt; i++) {AES_ECB_decrypt(&aes_s, ptr);ptr += 16;}*(dst + hexlen) = 0;char* pos = strstr((char*)dst, "&token=");if (pos > 0) {*(pos + 7) = 0;}return hexlen;
}int main() {int result = 0;//const char* data = "shopId=1180768823&ksid=Y2JJNGMTA1MzEyNjA5NDgzNjAxUEhaMmQwVTdQ&evaluateId=31113779107&kami=EVIPY9S5Q83XWSFAER8TREHV4VC2YXFVRE6A&token=";//const char* data = "shopId=514116500&ksid=YJQ1YJMTA1MzE0MTIxMTk1MTAxUEhaMWNMZDdQ&evaluateId=31113779107&kami=EVIPY9S5Q83XWSFAER8TREHV4VC2YXFVRE6A&token=";const char* data = "shopId=2062327205&ksid=ZJQ5MDMTA1MjcxNjI4ODk5ODAxUDJCNnRMRDhQ&evaluateId=31088725163&kami=EVIPY9S5Q83XWSFAER8TREHV4VC2YXFVRE6A&token=";int datalen = strlen(data);string base64 = encrypt((const unsigned char*)data,datalen);HANDLE hf = CreateFileA("encrypt.txt", GENERIC_WRITE, 0, 0, CREATE_ALWAYS, 0, 0);if (hf != INVALID_HANDLE_VALUE) {DWORD cnt = 0;result = WriteFile(hf, base64.c_str(), base64.length(), &cnt, 0);CloseHandle(hf);}unsigned char dst[1024];int dstlen = decrypt((const unsigned char*)base64.c_str(), base64.length(), dst);return 0;
}
这篇关于aes-ecb源码的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
