LM317 3-TERMINAL ADJUSTABLE REGULATOR

3-TERMINAL ADJUSTABLE REGULATOR : LM317 ( 可以 改用 LM350T / 3A )

FEATURES

• Output Voltage Range Adjustable From 1.25 V to 37 V
• Thermal Overload Protection
• Output Safe-Area Compensation
• Output Current Greater Than 1.5 A
• Internal Short-Circuit Current Limiting

Package

DC parameters

Application Circuit

NOTES:

1. Ci is not required, but is recommended, particularly if the regulator is not in close proximity to the power-supply filter cap1acitors.
   A 0.1-F disc or 1- F tantalum provides sufficient bypassing for most applications, especially when adjustment and output capacitors are used.
2. CO improves transient response, but is not needed for stability.
3. VO is calculated as shown:

	Because IAdj typically is 50uA, it is negligible in most applications.

4. CADJ is used to improve ripple rejection; it prevents amplification of the ripple as the output voltage is adjusted higher. If CADJ is used, it is best to include protection diodes.
5. If the input is shorted to ground during a fault condition, protection diodes provide measures to prevent the possibility of external capacitors discharging through low-impedance paths in the IC. By providing low-impedance discharge paths for CO and C ADJ, respectively, D1 and D2 prevent the capacitors from discharging into the output of the regulator.

LM317 3-TERMINAL ADJUSTABLE REGULATOR
<备份> 收集资料, 仅供参考。
数据剪辑自原厂规格书, 版权归原所有人拥有。
档案取自互联网!如有侵权或不适用情形, 请联系移除!
** 使用有风险, 请详阅原厂使用说明!
** 范例码为自用,请勿引用, Ctrl-C, Ctrl-V结果自行承担!
#Blog转移
#电子零件