新中新身份证阅读器驱动下载sdk DKQ-A16D

2023-11-21 01:30
文章标签 sdk 驱动 下载 阅读器 身份证 新中 dkq a16d

本文主要是介绍新中新身份证阅读器驱动下载sdk DKQ-A16D，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！

读取操作

int nRet;string sMsg = "";IDCardData idcardData = new IDCardData();byte[] ctmp = new byte[255];ReadCardAPI.Syn_SetPhotoPath(1, ref ctmp);setupDataFormate(1);nRet = ReadCardAPI.Syn_OpenPort(Main_Form.m_iPort);if (nRet == 0){DateTime startTime = DateTime.Now;nRet = ReadCardAPI.Syn_ReadMsg(Main_Form.m_iPort, 0, ref idcardData);int dTime = (int)(DateTime.Now - startTime).TotalMilliseconds;if (Main_Form.m_iReadStart == 1){Main_Form.m_iReadSum++;}if (nRet == 0 || nRet == 1)     //0读取身份证信息成功，1读取身份证信息成功，解码照片不成功，其他.读取身份证信息失败{if (Main_Form.m_iReadStart == 1){Main_Form.m_iReadOKSum++;}ShowIDcardInfo(idcardData);sMsg = "读取身份证信息成功，" + dTime + "ms";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}else{sMsg = "读取身份证信息错误，" + dTime + "ms";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}if (Main_Form.m_iReadStart == 1){sMsg = "第" + Main_Form.m_iReadSum + "次读二代证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}}else{sMsg = "打开端口错误";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}if (Main_Form.m_iPort > 0){ReadCardAPI.Syn_ClosePort(Main_Form.m_iPort);}

解析二代证

/// <summary>/// 显示读取到的身份证的信息/// </summary>/// <param name="idcardData"></param>private void ShowIDcardInfo(IDCardData idcardData){string sMsg = "";sMsg = "照片路径：" + idcardData.PhotoFileName;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType[0] == 'J')//港澳台通行证{sMsg=("签发次数:"+ idcardData.IssuesTimes);mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));sMsg="通行证号码:"+ idcardData.PassID;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}sMsg = "有效期结束：" + idcardData.UserLifeEnd;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "有效期开始：" + idcardData.UserLifeBegin;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "发证机关：" + idcardData.GrantDept;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "身份证号：" + idcardData.IDCardNo;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "住址：" + idcardData.Address;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "出生：" + idcardData.Born;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "民族：" + idcardData.Nation;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "性别：" + idcardData.Sex;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType == "I"){//外国人居住证sMsg = "证件版本：" + idcardData.CertVol;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);sMsg = "英文姓名：" + idcardData.EngName;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}sMsg = "姓名：" + idcardData.Name;mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);if (idcardData.CardType[0] == 'I'){sMsg="证件类型：外国人永久居住证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + sMsg);}else if (idcardData.CardType[0] == 'J'){sMsg="证件类型：港澳台居民居住证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}else{sMsg="证件类型：居民身份证";mainForm.listBox_log.Items.Insert(0, DateTime.Now.ToString() + "\t" + (sMsg));}//这样做可以及时释放文件占用，否则第二次刷卡会报错Image tmp = Image.FromFile(idcardData.PhotoFileName);Bitmap img = new Bitmap(tmp);tmp.Dispose();mainForm.pictureBox_img.Image = img;}

封装读卡类

using System;
using System.Collections.Generic;
using System.Runtime.InteropServices;
using System.Text;namespace SynjonesReader
{public static class ReadCardAPI{////				SAM端口函数/////// <summary>/// 查看串口当前波特率(该函数只用于SAM采用RS232串口的情形，如果采用USB接口则不支持该API)/// </summary>/// <param name="iPort">[in] 整数，表示端口号。此处端口号必须为1-16，表示串口</param>/// <param name="puiBaudRate">[out] 无符号整数指针，指向普通串口当前波特率, 默认情况下为115200</param>/// <returns>0成功，1失败/不合法，5无法获得该SAM的波特率，该SAM串口不可用</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetCOMBaud")]public static extern int Syn_GetCOMBaud(int iPort, ref int puiBaudRate);/// <summary>/// 设置SAM的串口的波特率(该函数只用于SAM采用RS232串口的情形，如果采用USB接口则不支持该API)，/// 设置成功后，在该SAM和主机注册表中都记录设置后的波特率，保证在SAM重新启动和该套API被重新调用时采用设置后的波特率。/// 该函数调用成功后，需要延时5毫秒，然后才能继续与SAM通信/// </summary>/// <param name="iPort">[in] 整数，表示端口号。此处端口号必须为1-16，表示串口。</param>/// <param name="uiCurrBaud">/// [in] 无符号整数，调用该API前已设置的业务终端与SAM通信的波特率(SAM出厂时默认,业务终端与SAM通信的波特率为115200)./// 业务终端以该波特率与SAM通信,发出设置SAM新波特率的命令.。/// uiCurrBaud只能为下列数值之一：115200，57600，38400，19200，9600.如果uiCurrBaud数值不是这些值之一，函数返回0X21;/// 如果已设置的波特率与uiCurrBaud不一致, 则函数返回0X02,表示不能设置,调用API不成功。/// </param>/// <param name="uiSetBaud">/// [in] 无符号整数，将要设置的SAM与业务终端通信波特率。/// uiSetBaud只能取下列值之一:：115200，57600，38400，19200，9600，/// 如果输入uiSetBaud参数不是这些数值之一,，函数返回0X21,设置不成功,保持原来的波特率不变。/// </param>/// <returns>/// 0成功，1端口打开失败/端口号不合法，2超时，设置不成功，33 uiCurrBaud 、uiSetBaud输入参数数值错误/// </returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetCOMBaud")]public static extern int Syn_SetCOMBaud(int iPort, int uiCurrBaud, int uiSetBaud);/// <summary>/// 打开端口/// </summary>/// <param name="iPort">端口号。1-16（十进制）为串口，1001-1016（十进制）为USB口，9999为USBHID</param>/// <returns>0成功，1打开端口失败/端口号不合法</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_OpenPort")]public static extern int Syn_OpenPort(int iPort);/// <summary>/// 关闭端口/// </summary>/// <param name="iPort">[in]整数，表示端口号</param>/// <returns>0成功，1端口不合法</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ClosePort")]public static extern int Syn_ClosePort(int iPort);////				SAM类函数////[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetMaxRFByte")]public static extern int Syn_SetMaxRFByte(int iPort,byte ucByte, int bIfOpen);/// <summary>/// 对SAM复位/// </summary>/// <param name="iPort">/// [in] 整数，表示端口号。/// 根据SAM使用的接口不同(分为普通串口SAM和USB口SAM)，/// 分别使用不同的端口号（目前串口和USB都只支持16个，即串口0001-0016和USB1001-1016）/// </param>/// <param name="iIfOpen">/// [in] 整数，0表示不在该函数内部打开和关闭串口，/// 此时确保之前调用了Syn_OpenPort来打开端口，并且在不需要与端口通信时，调用Syn_ClosePort关闭端口；/// 非0表示在API函数内部包含了打开端口和关闭端口函数，之前不需要调用Syn_OpenPort，也不用再调用Syn_ClosePort/// </param>/// <returns>0成功，其他失败（具体参见返回码表）</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ResetSAM")]public static extern int Syn_ResetSAM(int iPort, int iIfOpen);/// <summary>/// 对SAM进行状态检测/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0SAM正常,96自检失败，不能接收命令，其他，命令失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMStatus")]public static extern int Syn_GetSAMStatus(int iPort, int iIfOpen);/// <summary>/// 读取SAM的编号/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucSAMID">[out] 无符号字符串指针，指向读到的SAM编号， 16字节</param>/// <param name="iIfOpen"></param>/// <returns>0成功，其他，失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMID")]public static extern int Syn_GetSAMID(int iPort, byte[] pucSAMID, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetSAMIDToStr")]public static extern int Syn_GetSAMIDToStr(int iPort, ref char[] pucSAMID, int iIfOpen);////				身份证卡类函数/////// <summary>/// 开始寻卡/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucIIN">[out] 无符号字符指针，指向读到的IIN</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartFindIDCard")]public static extern int Syn_StartFindIDCard(int iPort, ref byte[] pucIIN, int iIfOpen);/// <summary>/// 选卡/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="pucIIN">[out] 无符号字符指针，指向读到的SN</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <returns>0选卡成功，129选卡失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SelectIDCard")]public static extern int Syn_SelectIDCard(int iPort, ref byte[] pucIIN, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseMsg")]public static extern int Syn_ReadBaseMsg(int iPort, ref byte pucCHMsg, ref int puiCHMsgLen,ref byte pucPHMsg,ref int puiPHMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseMsgToFile")]public static extern int Syn_ReadBaseMsgToFile(int iPort, ref char[] pcCHMsgFileName, ref int puiCHMsgLen, ref char[] pcPHMsgFileName, ref int puiPHMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseFPMsg")]public static extern int Syn_ReadBaseFPMsg(int iPort, ref byte pucCHMsg, ref int puiCHMsgLen, ref byte pucPHMsg, ref int puiPHMsgLen, ref byte pucFPMsg, ref int puiFPMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadBaseFPMsgToFile")]public static extern int Syn_ReadBaseFPMsgToFile(int iPort, ref char[] pcCHMsgFileName, ref int puiCHMsgFileLen, ref char[] pcPHMsgFileName, ref int puiPHMsgFileLen, ref char[] pcFPMsgFileName, ref int puiFPMsgFileLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadNewAppMsg")]public static extern int Syn_ReadNewAppMsg(int iPort, ref byte pucAppMsg, ref int puiAppMsgLen, int iIfOpen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_GetBmp")]public static extern int Syn_GetBmp(int iPort, ref char[] Wlt_File);/// <summary>/// 读取身份证中的基本信息和照片信息，并按设置转化信息和照片/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <param name="pIDCardData">[out] IDCardData信息</param>/// <returns>0读取身份证信息成功，1读取身份证信息成功，解码照片不成功，其他.读取身份证信息失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadMsg")]public static extern int Syn_ReadMsg(int iPort, int iIfOpen, ref IDCardData pIDCardData);/// <summary>/// 读取身份证中的基本信息和照片信息，并按设置转化信息和照片/// </summary>/// <param name="iPort">[in] 整数，表示端口号。参见Syn_ResetSAM</param>/// <param name="iIfOpen">[in] 整数，参见Syn_ResetSAM</param>/// <param name="pIDCardData">[out] IDCardData信息</param>/// <param name="cFPhotoname">cFPhotoName返回指纹信息文件名</param>/// <returns>0读取身份证信息成功，无指纹信息，1读取身份证信息成功，指纹读取成功，其他.读取身份证信息失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_ReadFPMsg")]public static extern int Syn_ReadFPMsg(int iPort, int iIfOpen, ref IDCardData pIDCardData, byte[] cFPhotoname);/// <summary>/// 自动寻找读卡器/// </summary>/// <returns>0失败，大于0为串口号或者端口号</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_FindReader")]public static extern int Syn_FindReader();[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_FindUSBReader")]public static extern int Syn_FindUSBReader();[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_BmpToJpeg")]public static extern int Syn_BmpToJpeg(ref char[] cBmpName, ref char[] cJpegName);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_PhotoToStrBase64")]public static extern int Syn_PhotoToStrBase64(ref char[] cBase64, ref int iLen, ref char[] cPhotoName);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StrBase64ToPhoto")]public static extern int Syn_StrBase64ToPhoto(ref char[] cBase64, int iLen, ref char[] cPhotoName);////				设置附加功能函数/////// <summary>/// 设置照片文件存储的路径/// </summary>/// <param name="iOption">[in] 整形，0=C:根目录，	1=当前路径	，2=指定路径</param>/// <param name="cPhotoPath">[in] 字符指针。路径名</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoPath")]public static extern int Syn_SetPhotoPath(int iOption, ref byte[] cPhotoPath);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoType")]public static extern int Syn_SetPhotoType(int iType);/// <summary>/// 设置照片文件的文件名/// </summary>/// <param name="iType">[in]整形。0=tmp，1=姓名，2=身份证号，3=姓名_身份证号</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoName")]public static extern int Syn_SetPhotoName(int iType);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetPhotoNameEx")]public static extern int Syn_SetPhotoNameEx(int iType, ref char[] cPhotoname);/// <summary>/// 设置返回性别的格式/// </summary>/// <param name="iType">[in] 整形。0=卡内存储的数据， 1=解释之后的数据</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetSexType")]public static extern int Syn_SetSexType(int iType);/// <summary>/// 设置返回民族的格式/// </summary>/// <param name="iType">[in]整形。0=卡内存储的数据，1=解释之后的数据，2=解释之后+“族”</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetNationType")]public static extern int Syn_SetNationType(int iType);/// <summary>/// 设置返回出生日期的格式/// </summary>/// <param name="iType">in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetBornType")]public static extern int Syn_SetBornType(int iType);/// <summary>/// 设置返回有效期开始日期的格式/// </summary>/// <param name="iType">[in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetUserLifeBType")]public static extern int Syn_SetUserLifeBType(int iType);/// <summary>/// 设置返回有效期结束日期的格式/// </summary>/// <param name="iType">[in] 整形。0=YYYYMMDD,1=YYYY年MM月DD日,2=YYYY.MM.DD,3=YYYY-MM-DD,4=YYYY/MM/DD</param>/// <param name="iOption">[in] 整形。0=长期不转换   1=长期转换为 有效期开始加50年</param>/// <returns>0成功，-1失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SetUserLifeEType")]public static extern int Syn_SetUserLifeEType(int iType, int iOption);////				USBHID函数/////// <summary>/// 复位M1卡片，返回M1卡片的卡号和卡类型/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN">[out]无符号四字节，返回M1卡片卡号</param>/// <param name="pbSize">[out] 无符号字节数组，返回M1卡卡类型</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1Reset")]public static extern int Syn_USBHIDM1Reset(int iPort, ref UInt32 pdwCardSN, ref byte pbSize);/// <summary>/// 用密钥验证M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="KeyType">[in]无符号字节，验证类型，0—密钥A验证 1—密钥B验证</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pKey">[in]无符号字节数组，6字节，密钥数组</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1AuthenKey")]public static extern int Syn_USBHIDM1AuthenKey(int iPort, byte KeyType, byte BlockNo, byte[] pKey);/// <summary>/// 读M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[out]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1ReadBlock")]public static extern int Syn_USBHIDM1ReadBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 写M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[in]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1WriteBlock")]public static extern int Syn_USBHIDM1WriteBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 挂起M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDM1Halt")]public static extern int Syn_USBHIDM1Halt(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDReadFactoryInfo")]public static extern int Syn_USBHIDReadFactoryInfo(int iPort, ref byte pFactory, ref byte pVol, ref byte pSerialNo, ref byte pReserved);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDWriteFactoryInfo")]public static extern int Syn_USBHIDWriteFactoryInfo(int iPort, ref byte pFactory, ref byte pVol, ref byte pSerialNo, ref byte pReserved);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDReadUserInfo")]public static extern int Syn_USBHIDReadUserInfo(int iPort, ref byte pInfo);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDWriteUserInfo")]public static extern int Syn_USBHIDWriteUserInfo(int iPort, ref byte pInfo);/// <summary>/// 获得读卡器支持的最大通讯字节数和版本/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pSAMMaxByte">[out]无符号字节，读卡器支持的最大通讯字节数</param>/// <param name="pARMVol">[out]无符号字节数组，版本号</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDGetMaxByte")]public static extern int Syn_USBHIDGetMaxByte(int iPort, ref byte pSAMMaxByte, ref byte pARMVol);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSendSound")]public static extern int Syn_USBHIDSendSound(int iPort,  byte ucSound);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDControlLED")]public static extern int Syn_USBHIDControlLED(int iPort, byte ucLed);/// <summary>/// 控制蜂鸣器命令（仅A16D-HF）/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="ucType">[in]无符号整形，命令,暂定为0X04</param>/// <param name="usTime"> [in]整形，蜂鸣器响时间，毫秒计算</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDControlBeep")]public static extern int Syn_USBHIDControlBeep(int iPort, byte ucType, int usTime);/// <summary>/// 读取二代证ID号（仅A16D-HF）/// </summary>/// <param name="iPort"> [in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN"> [out] 无符号字节数组，长度8字节</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDGetSecCardID")]public static extern int Syn_USBHIDGetSecCardID(int iPort, byte[] pdwCardSN);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMpowerOn")]public static extern int Syn_USBHIDSIMpowerOn(int iPort, ref byte ucATR,ref byte ucLen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMpowerOff")]public static extern int Syn_USBHIDSIMpowerOff(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSIMAPDU")]public static extern int Syn_USBHIDSIMAPDU(int iPort, int slen, ref byte datasend, ref int rlen, ref byte datareceive);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSetUserIDCode")]public static extern int Syn_USBHIDSetUserIDCode(int iPort, ref byte code, int len);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDSetUserIDCode")]public static extern int Syn_USBHIDWriteUserMac(int iPort, ref byte pMac);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDIsEncryptMode")]public static extern int Syn_USBHIDIsEncryptMode(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_USBHIDIsEncryptMode")]public static extern int Syn_USBHIDdoUpdate(int iPort, ref byte updateBuffer, int bufferLen, int progressCallback);////				串口操作M1卡函数////[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialFindReader")]public static extern int Syn_SerialFindReader(int iPort, ref int badurate);/// <summary>/// 打开串口/// </summary>/// <param name="iPort">串口号（1-16）</param>/// <param name="badurate">波特率（可使用Syn_GetCOMBaud获得）</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialOpen")]public static extern int Syn_SerialOpen(int iPort, int badurate);/// <summary>/// 关闭串口/// </summary>/// <param name="iPort">串口号（1-16）</param>/// <returns></returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialClose")]public static extern int Syn_SerialClose(int iPort);/// <summary>/// 复位M1卡片，返回M1卡片的卡号和卡类型/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="pdwCardSN">[out]无符号四字节，返回M1卡片卡号</param>/// <param name="pbSize">[out] 无符号字节数组，返回M1卡卡类型</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1Reset")]public static extern int Syn_SerialM1Reset(int iPort, ref UInt32 pdwCardSN, ref byte pbSize);/// <summary>/// 用密钥验证M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的串口号（1-16），可以使用Syn_FindReader获得</param>/// <param name="KeyType">[in]无符号字节，验证类型，0—密钥A验证 1—密钥B验证</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pKey">[in]无符号字节数组，6字节，密钥数组</param>/// <returns>0成功，128失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1AuthenKey")]public static extern int Syn_SerialM1AuthenKey(int iPort,byte KeyType, byte BlockNo, byte[] pKey);/// <summary>/// 读M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[out]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功，其他失败</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1ReadBlock")]public static extern int Syn_SerialM1ReadBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 写M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <param name="BlockNo">[in]无符号字节，M1卡块号</param>/// <param name="pBlock">[in]无符号字节数组，16字节，读取的数据</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1WriteBlock")]public static extern int Syn_SerialM1WriteBlock(int iPort, byte BlockNo, byte[] pBlock);/// <summary>/// 挂起M1卡/// </summary>/// <param name="iPort">[in]整形，读卡器的端口号，可以使用Syn_FindReader获得</param>/// <returns>0成功</returns>[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_SerialM1Halt")]public static extern int Syn_SerialM1Halt(int iPort);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartFindCPUCard")]public static extern int Syn_StartFindCPUCard(int iPort, byte[] ATS, ref int rlen);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_StartRemoveCPUCard")]public static extern int Syn_StartRemoveCPUCard(int iPort, byte[] ATS);[DllImport("SynIDCardAPI.dll", CharSet = CharSet.Unicode, CallingConvention = CallingConvention.StdCall, EntryPoint = "Syn_PCTOCPUCard")]public static extern int Syn_PCTOCPUCard(int iPort, int slen, byte[] datasend, ref int rlen, byte[] datareceive);/// <summary>/// 寻找USB读卡器/// </summary>/// <returns></returns>public static int findUSBDriverDevice(){int nRet;for (int i = 1001; i < 1017; i++){nRet = ReadCardAPI.Syn_OpenPort(i);if (nRet == 0){nRet = ReadCardAPI.Syn_GetSAMStatus(i, 0);if (nRet == 0){ReadCardAPI.Syn_ClosePort(i);return i;}ReadCardAPI.Syn_ClosePort(i);}}return 0;}/// <summary>/// 寻找USBHID读卡器/// </summary>/// <returns></returns>public static int findUSBHIDDevice(){int nRet;nRet = Syn_OpenPort(9999);if (nRet == 0){Syn_ClosePort(9999);return 9999;}return 0;}/// <summary>/// 寻找串口读卡器/// </summary>/// <returns></returns>public static int findSerialDevice(){int nRet = 0;int m_iBaud = 0;for (int k = 1; k < 50; k++){nRet = Syn_SerialFindReader(k, ref m_iBaud);if (nRet == 0){return k;}}for (int j = 1; j < 17; j++){nRet = Syn_GetCOMBaud(j, ref m_iBaud);if (nRet == 0){nRet = Syn_SetCOMBaud(j, m_iBaud, m_iBaud);if (nRet == 0){Syn_ClosePort(j);return j;}Syn_ClosePort(j);}}return 0;}}#region 结构体//[StructLayout(LayoutKind.Sequential)][StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi, Pack = 1)]public struct IDCardData{[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]   //ByValTStr           ByValArray     CertVolpublic string Name;      //姓名   [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string Sex;       //性别[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]public string Nation;    //民族[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string Born;      //出生日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 72)]public string Address;   //住址[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 38)]public string IDCardNo;  //身份证号[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]public string GrantDept; //发证机关[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string UserLifeBegin; // 有效开始日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 18)]public string UserLifeEnd;   // 有效截止日期[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 20)]public string PassID;        //通行证号码[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string IssuesTimes;   //签发次数[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 12)]public string reserved;      // 保留[MarshalAs(UnmanagedType.ByValTStr, SizeConst = 255)]public string PhotoFileName;// 照片路径   [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 4)]public string CardType;// 证件类型     [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 122)]public string EngName;// 英文名      [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 6)]public string CertVol;// 证件版本号                }#endregion}

这篇关于新中新身份证阅读器驱动下载sdk DKQ-A16D的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！


http://www.chinasem.cn/article/398853。

相关文章

常用的jdk下载地址

常用的jdk下载地址

jdk下载地址 安装方式可以看之前的博客： mac安装jdk oracle 版本：https://www.oracle.com/java/technologies/downloads/ Eclipse Temurin版本：https://adoptium.net/zh-CN/temurin/releases/ 阿里版本： github：https://github.com/
阅读更多...
Linux_kernel驱动开发11

Linux_kernel驱动开发11

一、改回nfs方式挂载根文件系统         在产品将要上线之前，需要制作不同类型格式的根文件系统         在产品研发阶段，我们还是需要使用nfs的方式挂载根文件系统         优点：可以直接在上位机中修改文件系统内容，延长EMMC的寿命         【1】重启上位机nfs服务         sudo service nfs-kernel-server resta
阅读更多...
2. 下载rknn-toolkit2项目

2. 下载rknn-toolkit2项目

官网链接： https://github.com/airockchip/rknn-toolkit2 安装好git：[[1. Git的安装]] 下载项目： git clone https://github.com/airockchip/rknn-toolkit2.git 或者直接去github下载压缩文件，解压即可。
阅读更多...
消除安卓SDK更新时的“https://dl-ssl.google.com refused”异常的方法

消除安卓SDK更新时的“https://dl-ssl.google.com refused”异常的方法

消除安卓SDK更新时的“https://dl-ssl.google.com refused”异常的方法   消除安卓SDK更新时的“https://dl-ssl.google.com refused”异常的方法 [转载]原地址：http://blog.csdn.net/x605940745/article/details/17911115 消除SDK更新时的“
阅读更多...
前端form表单+ifarme方式实现大文件下载

前端form表单+ifarme方式实现大文件下载

// main.jsimport Vue from 'vue';import App from './App.vue';import { downloadTokenFile } from '@/path/to/your/function'; // 替换为您的函数路径// 将 downloadTokenFile 添加到 Vue 原型上Vue.prototype.$downloadTokenF
阅读更多...
【干货分享】基于SSM的体育场管理系统的开题报告（附源码下载地址）

【干货分享】基于SSM的体育场管理系统的开题报告（附源码下载地址）

中秋送好礼 中秋佳节将至，祝福大家中秋快乐，阖家幸福。本期免费分享毕业设计作品：《基于SSM的体育场管理系统》。 基于SSM的体育场管理系统的开题报告 一、课题背景与意义 随着全民健身理念的深入人心，体育场已成为广大师生和社区居民进行体育锻炼的重要场所。然而，传统的体育场管理方式存在诸多问题，如资源分配不均、预约流程繁琐、数据统计不准确等，严重影响了体育场的使用效率和用户体验。
阅读更多...
Tomcat下载压缩包解压后应有如下文件结构

Tomcat下载压缩包解压后应有如下文件结构

1、bin：存放启动和关闭Tomcat的命令的路径。 2、conf：存放Tomcat的配置，所有的Tomcat的配置都在该路径下设置。 3、lib：存放Tomcat服务器的核心类库（JAR文件），如果需要扩展Tomcat功能，也可将第三方类库复制到该路径下。 4、logs：这是一个空路径，该路径用于保存Tomcat每次运行后产生的日志。 5、temp：保存Web应用运行过程中生成的临时文件
阅读更多...
下载/保存/读取 文件，并转成流输出

下载/保存/读取 文件，并转成流输出

最近对文件的操作又熟悉了下；现在记载下来：学习在于 坚持！！！不以细小而不为。 实现的是：文件的下载、文件的保存到SD卡、文件的读取输出String 类型、最后是文件转换成流输出；一整套够用了； 重点： 1:   操作网络要记得开线程； 2：更新网络获取的数据 切记用Handler机制； 3：注意代码的可读性(这里面只是保存到SD卡，在项目中切记要对SD卡的有无做判断，然后再获取路径！)
阅读更多...
驱动（RK3588S）第七课时：单节点设备树

驱动（RK3588S）第七课时：单节点设备树

目录 需求一、设备树的概念1、设备树的后缀名：2、设备树的语法格式3、设备树的属性（重要）4、设备树格式举例 二、设备树所用函数1、如何在内核层种获取设备树节点：2、从设备树上获取 gpio 口的属性3、获取节点上的属性只针对于字符串属性的4、函数读取 np 结点中的 propname 属性的值，并将读取到的 u32 类型的值保存在 out_value 指向的内存中，函数的返回值表示读取到的
阅读更多...
Python批量读取身份证信息录入系统和重命名

Python批量读取身份证信息录入系统和重命名

前言 大家好， 如果你对自动化处理身份证图片感兴趣，可以尝试以下操作：从身份证图片中快速提取信息，填入表格并提交到网页系统。如果你无法完成这个任务，我们将在“Python自动化办公2.0”课程中详细讲解实现整个过程。 实现过程概述： 模块与功能： re 模块：用于从 OCR 识别出的文本中提取所需的信息。 日期模块：计算年龄。 pandas：处理和操作表格数据。 PaddleOCR：百度的
阅读更多...

Copyright China编程 23002807@qq.com

沪ICP备2023033072号-2