【linux相识相知】sed命令

2023-11-01 12:40
文章标签 linux 命令 sed 相识 相知

本文主要是介绍【linux相识相知】sed命令,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

在之前的博客中我们介绍了文本三剑客中grep,本次博客就另外一名剑客——sed做出详细的描述,sed真的是一款强大的工具。下面让我们来一起看一下吧!

 

概述和工作机制

SED的英文全称为Stream EDitor,中文称流编辑器。默认情况下,它会一行一行的读取文件中的内容,在了解其工作原理之前,首先我们得先知道一下几个概念:

1.模式空间(pattern buffer):sed从文件中读取行首先会放到模式空间中进行执行和处理,定义的sed命令都是在这里执行的,默认情况下会逐行的读,逐行的处理,除非你做了行定界。

2.保持空间(hold buffer):在处理完模式空间的一些行的时候,我们有可能需要一个临时的地方去存放模式空间中的内容,这时候就可以将模式空间中的内容放到保持空间了。

初始情况下,模式空间和保持空间都是空的。

1.默认情况下,将从文件中逐行的读取内容至模式空间;

2.默认情况下,模式空间中的内容在处理完成后将会打印到标准输出;

3.sed命令在模式空间中的都是按顺序执行的,除非指定了行定界,否则将在所有的行上面执行;

4.修改后的行被送至标准输出的之后,模式空间将被清空。

 

基本选项

 语法格式:

sed [OPTION]... {script-only-if-no-other-script} [input-file]...

-n:不输出模式空间中的内容至标准输出

#例子1
[root@localhost ~]# sed '' /etc/fstab #
# /etc/fstab
# Created by anaconda on Wed Sep  6 11:16:57 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/cl-root     /                       xfs     defaults        0 0
UUID=0ab24855-5180-4d3e-a61d-99ca54711c2c /boot                   xfs     defaults        0 0
/dev/mapper/cl-swap     swap                    swap    defaults        0 0
[root@localhost ~]# 
#例子2
[root@localhost ~]# sed -n '' /etc/fstab 
[root@localhost ~]#

默认情况下,sed命令会逐行的读取文件中每一行内容至模式空间,再执行执行单引号内的命令,如例子1,单引号内没有任何内容,所以不会对行内容作任何的处理,所以sed会逐行读取文件的内容,然后逐行的显示到标准输出,每打印一行到标准输出,模式空间就会被清空一次。在例子2中,加了-n的选项,会阻止输出到标准输出,所以就不会显示任何的内容。

 -e script:指定多个命令

[root@localhost ~]# cat poetry 
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain
#例子3
[root@localhost ~]# sed -e '1d' -e '10d' poetry 
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
11)Know it will pass,  
12)And strength you will gain 

使用-e选项,可以同时对行作出多个模式匹配,d的意思是删除。这里的例子3,文件poetry是输入,sed读取第一行的内容至模式1空间,然后判断是否是第一行,判断成功是第一行,则删除第一行(从模式空中清除,也不会打印至标准输出),读取第二行,先判断是否是第一行,不是,再判断是否是第十行,不是,然后打印至标准输出,所以在标准输出中只显示了不包含第一行和第十行的其他行的内容。注意:sed不会修改原文件的内容。

-f  /path/to/script:把sed的编辑命令放在文件中,注意每一行一个命令:

#例子4
[root@localhost ~]# cat sed_script.txt    #编辑命令存放的文本文件
1d
10d
[root@localhost ~]# sed -f sed_script.txt poetry 
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
11)Know it will pass,  
12)And strength you will gain 

我们可以看到例子4中sed使用-f选项指定编辑命令所在的文件,执行的是和例子3同样的操作,删除第一行和第十行,当我们得编辑命令有很多,把它放在文件也是一个不错的做法吧!

 

行定界

默认情况下不指定行的定界,会读取处理整个文件的每一行。如果指定了行,还是会读取每一行,但是在执行各种命令操作之后,会进行判断是不是定界的行,如果判断成功,则执行操作,如删除行,如果判断失败,则不做任何的处理然后打印至标准输出,下面来看一下几种常见的定界方法:

(1)定界为空,对全文的每一行进行处理

[root@localhost ~]# sed  '' poetry 
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
(2)单行指定
a.直接写单个数字,表示指定行
[root@localhost ~]# sed  '2d' poetry  #当判断为第二行的时候,会删除第二行
1)Never give up,  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain

b./pattern/:被模式匹配到的行,默认可以是基本的正在表达式

[root@localhost ~]# sed  '/As/ d' poetry  #删除被模式匹配的行
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

c.$最后一行

[root@localhost ~]# sed  '$ d' poetry  #删除最后一行
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,

(3)定界范围

a.x,y:x至y行

[root@localhost ~]# sed  '1,9 d' poetry  #删除了1-9行
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

b.x,+y:x行到,x行往下数y个行

[root@localhost ~]# sed  '1,+3 d' poetry #删除第一行,和第一行往下的3行,也就是一直删除到第四行
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

c.x,/pattren/:x到被模式匹配的行

[root@localhost ~]# sed  '2,/smile/ d' poetry  #删除第二行至被smile匹配的行,smile被第九行匹配
1)Never give up,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

d./pattren1/,/pattern2/:被模式1匹配的行开始到被模式2匹配的行

[root@localhost ~]# sed '/Always/,/put/ d' poetry 
1)Never give up,  
2)Never lose hope.  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
(4)使用"~"指定步进
"~"号前面为开始行,后面为步进的长度:
[root@localhost ~]# sed '1~2 d' poetry  #显示偶数行
2)Never lose hope.  
4)It allows you to cope.  
6)As they always do.  
8)Your dreams will come true.  
10)You'll live through your pain.  
12)And strength you will gain 
[root@localhost ~]# sed '2~2 d' poetry   #显示奇数行
1)Never give up,  
3)Always have faith,  
5)Trying times will pass,  
7)Just have patience,  
9)So put on a smile,  
11)Know it will pass, 

 

编辑命令

下面我们来看一下编辑命令,如前面的d选项是删除行的意思,那么除了d选项,还有哪些呢?

p:显示模式空间的内容

#例5
[root@localhost ~]# sed   'p' poetry 
1)Never give up,  
1)Never give up,  
2)Never lose hope.  
2)Never lose hope.  
3)Always have faith,  
3)Always have faith,  
4)It allows you to cope.  
4)It allows you to cope.  
5)Trying times will pass,  
5)Trying times will pass,  
6)As they always do.  
6)As they always do.  
7)Just have patience,  
7)Just have patience,  
8)Your dreams will come true.  
8)Your dreams will come true.  
9)So put on a smile,  
9)So put on a smile,  
10)You'll live through your pain.  
10)You'll live through your pain.  
11)Know it will pass,  
11)Know it will pass,  
12)And strength you will gain 
12)And strength you will gain 
#例6
[root@localhost ~]# sed -n  'p' poetry 
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
View Code

在例5中,每一行都被打印了2次,原因是在模式空间的时候被打印了一次,然后处理完成之后,在标准输出又被打印了一次,所以自然会显示出两次。如果使用-n,则仅仅打印的模式空间的内容。

a test:在行后面追加文本"test",可以使用\n实现多行追加

[root@localhost ~]# sed '1 a hi i am here\nhey ' poetry 
1)Never give up,  
hi i am here
hey 
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

i test:在 行前面插入文本test,支持使用\n实现多行插入

[root@localhost ~]# sed '2i  hi i am here\nhey ' poetry 
1)Never give up,  
hi i am here
hey 
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

c test:把匹配到的行替换为此处指定的行

[root@localhost ~]# sed '2c  hi i am here ' poetry 
1)Never give up,  
hi i am here 
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

w /path/to/somefile:保存模式空间中匹配到的内容到指定的文件中

[root@localhost ~]# sed '/So/  w  /tmp/poetry' poetry 
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
[root@localhost ~]# 
[root@localhost ~]# cat /tmp/poetry 
9)So put on a smile,  

r /path/from/somefile:读取指定文件的内容至当前文件中被模式匹配的行后面

[root@localhost ~]# cat poetry2.txt 
13)yes! I can!
[root@localhost ~]# sed '12 r poetry2.txt' poetry
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
13)yes! I can!

=:为模式匹配到的行打印行号,打印在行的上面

[root@localhost ~]# sed '/Never/ =' poetry
1
1)Never give up,  
2
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

!:条件取反

[root@localhost ~]# sed '/Never/ !d' poetry  #不删除被默认匹配的行
1)Never give up,  
2)Never lose hope.  

s///:查找替换,分割符可以自定义,比如使用s@@@flag或者s###flag,默认会替换被匹配的第一个位置,但是可以添加替换标记:

s///g:全局替换

[root@localhost ~]# cat poetry
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 
[root@localhost ~]# sed 's/\<you\>/your/g' poetry
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows your to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength your will gain 
View Code

sed默认支持的基本的正则表达式,使用-r, --regexp-extended选项可以支持扩展的正则表达式。

 

练习1:删除/boot/grub2/grub.cfg文件中所有以空白字符开头的行的行首的所有空白字符

[root@localhost ~]# sed -r 's@^[[:space:]]+@@g' /boot/grub2/grub.cfg
View Code

练习2:删除/etc/fstab文件中所有以#开头的行的行首的#号及#后面的所有空白字符

[root@localhost ~]# sed 's/^#[[:space:]]*//g' /etc/fstab
View Code

练习3:输出一个目录给sed,取出其目录,类似于dirname

[root@localhost ~]# echo "/var/log/messages" | sed -r 's@[^/]+/?$@@'
/var/log/
[root@localhost ~]# 
[root@localhost ~]# echo "/var/log/messages/" | sed -r 's@[^/]+/?$@@'
/var/log/
View Code

 

 高级编辑命令

 sed还有一些高级的命令,会用到之前说到的保持空间。

 

举一些例子来看一下吧!

[root@localhost ~]# cat poetry
1)Never give up,  
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

可以自己先思考一下答案,再点开:

[root@localhost ~]# sed -n 'n;p' poetry  #只显示偶数行
2)Never lose hope.  
4)It allows you to cope.  
6)As they always do.  
8)Your dreams will come true.  
10)You'll live through your pain.  
12)And strength you will gain 
sed -n 'n;p' poetry
[root@localhost ~]# sed  '1!G;h;$!d'  poetry  #逆序显示
12)And strength you will gain 
11)Know it will pass,  
10)You'll live through your pain.  
9)So put on a smile,  
8)Your dreams will come true.  
7)Just have patience,  
6)As they always do.  
5)Trying times will pass,  
4)It allows you to cope.  
3)Always have faith,  
2)Never lose hope.  
1)Never give up, 
sed '1!G;h;$!d' poetry
[root@localhost ~]# sed  '$!d'  poetry  #只保留最后一行,类似tail -1
12)And strength you will gain 
sed '$!d' poetry
[root@localhost ~]# sed  '$!N;$!D' poetry  #取出最后两行
11)Know it will pass,  
12)And strength you will gain 
sed '$!N;$!D' poetry
[root@localhost ~]# sed 'G' poetry  #在每一行的后面添加一个空白行
1)Never give up,  2)Never lose hope.  3)Always have faith,  4)It allows you to cope.  5)Trying times will pass,  6)As they always do.  7)Just have patience,  8)Your dreams will come true.  9)So put on a smile,  10)You'll live through your pain.  11)Know it will pass,  12)And strength you will gain 
sed 'G' poetry

这些都是一些高级的用法,在工作中用的可能比较少,因为有的结果完全可以用其他简单的命令去实现。

 

循环和分支

 sed最牛逼之处莫过于这个了,sed提供了一个循环和分支工来控制程序的执行流程。

 循环

sed循环的工作原理类似于现代编程语言中的goto语句。

定义sed的标签:

:label

跳转到标签的位置,使用b命令后面跟着标签名即可,下面我们来看一个具体的实例:

[root@localhost ~]# cat teleplay 
剧名:白夜追凶
评分:9.0
剧名:秘密深林
评分:9.3
剧名:权利的游戏第七季
评分:9.3
剧名:请回答1988
评分:9.6
[root@localhost ~]# sed -n '
h;n;H;x
s@\n@,@
/请回答/!b label
s@^@---@
:label
p' teleplay
剧名:白夜追凶,评分:9.0
剧名:秘密深林,评分:9.3
剧名:权利的游戏第七季,评分:9.3
---剧名:请回答1988,评分:9.6

分析:

由于命令很长,我们可以将命令分行来写,当然也可以写在一行里面:

1.h;n;H;x:将第一行内容读取到模式空间,执行h,将模式空间的内容覆盖至保持空间,执行n,从文件中读取第二行覆盖至模式空间,执行H,将模式空间的内容追加至保持空间,执行x,将保持空间的内容和模式空间调换;(这里得到的结果就是模式空间中存在两行);

2.s@\n@,@,将换行符替换为逗号;这样原来的两行就变成了一行;

3./请回答/!b label,判断这一行中是否有“请回答”三个字符,如果没有则直接跳到":label",然后执行打印"p",打印模式空间中的内容,如果有则执行"s@^@---@",将在行首添加字符"---"。

这样一来,只有"剧名:请回答1988,评分:9.6"被匹配,然后进行了行首的替换操作。

 

分支

 可以使用t来创建分支。使用t命令跳转到指定的标签,一样我们来看一个例子:

[root@localhost ~]# sed -n '
> h;n;H;x
> s/\n/,/
> :loop
> /白夜追凶/s/^/-/
> /-----/!t loop
> p' teleplay
-----剧名:白夜追凶,评分:9.0
剧名:秘密深林,评分:9.3
剧名:权利的游戏第七季,评分:9.3
剧名:请回答1988,评分:9.6

分析:
由于命令很长,我们可以将命令分行来写,当然也可以写在一行里面:

1:h;n;H;x:将第一行内容读取到模式空间,执行h,将模式空间的内容覆盖至保持空间,执行n,从文件中读取第二行覆盖至模式空间,执行H,将模式空间的内容追加至保持空间,执行x,将保持空间的内容和模式空间调换;(这里得到的结果就是模式空间中存在两行);

2:s@\n@,@,将换行符替换为逗号;这样原来的两行就变成了一行;

3::loop:定义了一个loop标签;

4:/白夜追凶/s/^/-/:是否匹配模式,如果匹配则在其行首添加一个"-";如果不匹配,则直接打印;

5:/-----/!t loop:是否存在5个"-",如果不存在,则跳到标签loop处,继续执行第4步添加"-",直到满足5个"-",则跳出循环打印。

最后,我们之前的所有的操作,都是没有修改文件的本身的,可以使用 -i 选项来直接修改文件本身,慎用,建议在使用之前,先备份一下文件!

[root@localhost ~]# sed -i '1d' poetry
[root@localhost ~]# 
[root@localhost ~]# cat poetry
2)Never lose hope.  
3)Always have faith,  
4)It allows you to cope.  
5)Trying times will pass,  
6)As they always do.  
7)Just have patience,  
8)Your dreams will come true.  
9)So put on a smile,  
10)You'll live through your pain.  
11)Know it will pass,  
12)And strength you will gain 

总结:sed的确是一个强大的文本处理工具,功能非常丰富,需要在今后的日常使用和工作中不断的熟悉和巩固。

 

参考链接:http://blog.jobbole.com/109088/     《三分钟学会SED》写的非常好!

 

转载于:https://www.cnblogs.com/liubinsh/p/7516402.html

这篇关于【linux相识相知】sed命令的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/323059

相关文章

Linux命令之firewalld的用法

《Linux命令之firewalld的用法》:本文主要介绍Linux命令之firewalld的用法,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录linux命令之firewalld1、程序包2、启动firewalld3、配置文件4、firewalld规则定义的九大

Linux之计划任务和调度命令at/cron详解

《Linux之计划任务和调度命令at/cron详解》:本文主要介绍Linux之计划任务和调度命令at/cron的使用,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录linux计划任务和调度命令at/cron一、计划任务二、命令{at}介绍三、命令语法及功能 :at

Linux下如何使用C++获取硬件信息

《Linux下如何使用C++获取硬件信息》这篇文章主要为大家详细介绍了如何使用C++实现获取CPU,主板,磁盘,BIOS信息等硬件信息,文中的示例代码讲解详细,感兴趣的小伙伴可以了解下... 目录方法获取CPU信息:读取"/proc/cpuinfo"文件获取磁盘信息:读取"/proc/diskstats"文

Linux内核参数配置与验证详细指南

《Linux内核参数配置与验证详细指南》在Linux系统运维和性能优化中,内核参数(sysctl)的配置至关重要,本文主要来聊聊如何配置与验证这些Linux内核参数,希望对大家有一定的帮助... 目录1. 引言2. 内核参数的作用3. 如何设置内核参数3.1 临时设置(重启失效)3.2 永久设置(重启仍生效

kali linux 无法登录root的问题及解决方法

《kalilinux无法登录root的问题及解决方法》:本文主要介绍kalilinux无法登录root的问题及解决方法,本文给大家介绍的非常详细,对大家的学习或工作具有一定的参考借鉴价值,... 目录kali linux 无法登录root1、问题描述1.1、本地登录root1.2、ssh远程登录root2、

Linux ls命令操作详解

《Linuxls命令操作详解》通过ls命令,我们可以查看指定目录下的文件和子目录,并结合不同的选项获取详细的文件信息,如权限、大小、修改时间等,:本文主要介绍Linuxls命令详解,需要的朋友可... 目录1. 命令简介2. 命令的基本语法和用法2.1 语法格式2.2 使用示例2.2.1 列出当前目录下的文

Spring Boot项目部署命令java -jar的各种参数及作用详解

《SpringBoot项目部署命令java-jar的各种参数及作用详解》:本文主要介绍SpringBoot项目部署命令java-jar的各种参数及作用的相关资料,包括设置内存大小、垃圾回收... 目录前言一、基础命令结构二、常见的 Java 命令参数1. 设置内存大小2. 配置垃圾回收器3. 配置线程栈大小

Linux中的计划任务(crontab)使用方式

《Linux中的计划任务(crontab)使用方式》:本文主要介绍Linux中的计划任务(crontab)使用方式,具有很好的参考价值,希望对大家有所帮助,如有错误或未考虑完全的地方,望不吝赐教... 目录一、前言1、linux的起源与发展2、什么是计划任务(crontab)二、crontab基础1、cro

Linux换行符的使用方法详解

《Linux换行符的使用方法详解》本文介绍了Linux中常用的换行符LF及其在文件中的表示,展示了如何使用sed命令替换换行符,并列举了与换行符处理相关的Linux命令,通过代码讲解的非常详细,需要的... 目录简介检测文件中的换行符使用 cat -A 查看换行符使用 od -c 检查字符换行符格式转换将

Linux系统配置NAT网络模式的详细步骤(附图文)

《Linux系统配置NAT网络模式的详细步骤(附图文)》本文详细指导如何在VMware环境下配置NAT网络模式,包括设置主机和虚拟机的IP地址、网关,以及针对Linux和Windows系统的具体步骤,... 目录一、配置NAT网络模式二、设置虚拟机交换机网关2.1 打开虚拟机2.2 管理员授权2.3 设置子