本文主要是介绍修改HDMI分辨率 1280X1024 imx6，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
imx6 修改HDMI分辨率 1280*1024 kernel 4.1.15
修改文件为；
1， drivers/video/fbdev/mxc/mxc_edid.c
在const struct fb_videomode mxc_cea_mode[64] = {中添加如下代码：
/* #60: 1280x1024@30Hz 4:3 */
[60] = {
NULL, 30, 1280, 1024, 17806, 161, 127, 55, 43, 96, 3,
FB_SYNC_HOR_HIGH_ACT,
FB_VMODE_NONINTERLACED | FB_VMODE_ASPECT_4_3, 0
},
2， drivers/video/fbdev/mxc/mxc_hdmi.c
添加新的参数：
static const struct fb_videomode sxga_mode = {
/* 1280x1024 @ 30 Hz */
NULL, 30, 1280, 1024, 17806, 161, 127, 55, 43, 96, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED | FB_VMODE_ASPECT_4_3, FB_MODE_IS_VESA,
};
在函数static void mxc_hdmi_edid_rebuild_modelist(struct mxc_hdmi *hdmi)中修改：
// fb_add_videomode(&vga_mode, &hdmi->fbi->modelist);
fb_add_videomode(&sxga_mode, &hdmi->fbi->modelist);
3，uboot启动传递参数
setenv mmcargs “setenv bootargs console=ttymxc1,115200 root=/dev/mmcblk3p2 rootwait rw video=mxcfb0:dev=hdmi,1280x1024M@30,if=RGB24,bpp=32”
run bootcmd
这篇关于修改HDMI分辨率 1280X1024 imx6的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
