本文主要是介绍【STM32+HAL库】---- 硬件IIC驱动0.96OLED，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
硬件开发板：STM32G0B1RET6
软件平台：cubemax+keil+VScode
内容原著声明
代码借鉴学习于以下文章：
STM32 使用硬件IIC驱动0.96寸4针IOLED显示器（HAL库）
1 新建cubemax工程
1.1 配置系统时钟RCC
1.2 配置引脚
1.3 导出工程
略…
2 代码
2.1 OLED_IIC_Config.h
/*** ************************************************************************* * @file OLED_IIC_Config.h* @author zxr* @brief IIC和OLED基础配置头文件* * ************************************************************************* @copyright Copyright (c) 2024 zxr * *************************************************************************/
#ifndef OLED_IIC_CONFIG_H
#define OLED_IIC_CONFIG_H#include "main.h"
#include "stm32g0xx_hal.h"#define OLED_ADDRESS 0x78 //OLED地址 默认0x78//OLED命令控制宏
#define LEFT 0x27
#define RIGHT 0x26
#define UP 0X29
#define DOWM 0x2A
#define ON 0xA7
#define OFF 0xA6#define SCREEN_PAGE_NUM (8) //屏幕页数
#define SCREEN_PAGEDATA_NUM (128) //每页的数据个数
#define SCREEN_COLUMN (128) //列数
#define SCREEN_ROW (64) //行数void WriteCmd(unsigned char cmd); //写命令
void WriteDat(unsigned char dat); //写数据
void OLED_ON(void); //开启OLED
void OLED_OFF(void); //休眠OLED
void OLED_CLS(void); //OLED清屏函数
void OLED_Init(void); //OLED初始化函数
void OLED_RefreshRAM(void); //更新数据缓冲区
void OLED_ClearRAM(void); //清除数据缓冲区
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel); //设置坐标像素点数据
void OLED_DisplayMode(unsigned char mode); //屏幕内容取反显示
void OLED_IntensityControl(unsigned char intensity);//屏幕亮度调节
void OLED_Shift(unsigned char shift_num); //全屏内容偏移指定距离
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction); //屏幕内容水平方向滚动播放#endif /*OLED_IIC_CONFIG_H*/2.2 OLED_IIC_Config.c
/*** ************************************************************************* * @file OLED_IIC_Config.c* @author zxr* @brief IIC初始化配置和OLED屏幕的底层驱动* * ************************************************************************* @copyright Copyright (c) 2024 zxr * *************************************************************************/
#include "OLED_IIC_Config.h"
#include "i2c.h"
#include "MyDelay.h"unsigned char ScreenBuffer[SCREEN_PAGE_NUM][SCREEN_COLUMN];//定义屏幕的存储空间/**
* @brief 向OLED寄存器地址写一个byte的数据
* @param addr：寄存器地址
* @param data：要写入的数据
* @retval 无
*/
void I2C_WriteByte(uint8_t addr, uint8_t data)
{extern I2C_HandleTypeDef hi2c1;HAL_I2C_Mem_Write(&hi2c1, OLED_ADDRESS, addr, I2C_MEMADD_SIZE_8BIT, &data, 1, 10);
}/*** ************************************************************************* @brief 写命令函数* @param[in] cmd 写入的命令* *************************************************************************/
void WriteCmd(unsigned char cmd)
{I2C_WriteByte(0x00, cmd);
}/*** ************************************************************************* @brief 写数据函数* @param[in] dat 写入的数据* *************************************************************************/
void WriteDat(unsigned char dat)
{I2C_WriteByte(0x40, dat);
}/*** ************************************************************************* @brief 开启OLED* *************************************************************************/
void OLED_ON(void)
{WriteCmd(0X8D); //设置电荷泵WriteCmd(0X14); //开启电荷泵WriteCmd(0XAF); //OLED唤醒
}/*** ************************************************************************* @brief 休眠OLED* *************************************************************************/
void OLED_OFF(void)
{WriteCmd(0X8D); //设置电荷泵WriteCmd(0X10); //关闭电荷泵WriteCmd(0XAE); //OLED休眠
}/*** ************************************************************************* @brief OLED清屏函数* *************************************************************************/
void OLED_CLS(void)//清屏
{unsigned char m,n;for(m=0;m<8;m++){WriteCmd(0xb0+m); //page0-page1WriteCmd(0x00); //low column start addressWriteCmd(0x10); //high column start addressfor(n=0;n<128;n++){WriteDat(0x00);}}
}/*** ************************************************************************* @brief OLED初始化函数* *************************************************************************/
void OLED_Init(void)
{WriteCmd(0xAE); //显示关闭WriteCmd(0x20); //设置内存寻址模式WriteCmd(0x10); //00,水平寻址模式;01,垂直寻址模式;10,页寻址模式(复位);11,无效WriteCmd(0xb0); //设置页寻址模式的页起始地址,0-7WriteCmd(0xc8); //设置COM输出扫描方向WriteCmd(0x00); //-设置低列地址WriteCmd(0x10); //-设置高列地址WriteCmd(0x40); //-设置起始行地址WriteCmd(0x81); //设置对比度控制寄存器WriteCmd(0xff); //亮度调节 0x00~0xffWriteCmd(0xa1); //设置段重新映射0到127WriteCmd(0xa6); //设置正常显示WriteCmd(0xa8); //设置复用比例(1到64)WriteCmd(0x3F); //WriteCmd(0xa4); //0xa4,输出遵循RAM内容;0xa5,输出忽略RAM内容WriteCmd(0xd3); //设置显示偏移WriteCmd(0x00); //不偏移WriteCmd(0xd5); //--set display clock divide ratio/oscillator frequencyWriteCmd(0xf0); //--set divide ratioWriteCmd(0xd9); //--set pre-charge periodWriteCmd(0x22); //WriteCmd(0xda); //--set com pins hardware configurationWriteCmd(0x12);WriteCmd(0xdb); //--set vcomhWriteCmd(0x20); //0x20,0.77xVccWriteCmd(0x8d); //设置DC-DC使能WriteCmd(0x14); //WriteCmd(0xaf); //--turn on oled panelOLED_CLS();
}/*** ************************************************************************* @brief 更新数据缓冲区* *************************************************************************/
void OLED_RefreshRAM(void)
{// 页寻址模式填充for(unsigned short int m = 0; m < SCREEN_ROW/8; m++){WriteCmd(0xb0+m); //设置页地址b0~b7WriteCmd(0x00); //设置显示位置—列低地址00-0fWriteCmd(0x10); //设置显示位置—列高地址10-1ffor(unsigned short int n = 0; n < SCREEN_COLUMN; n++){WriteDat(ScreenBuffer[m][n]);}}
}/*** ************************************************************************* @brief 清除数据缓冲区* *************************************************************************/
void OLED_ClearRAM(void)
{for(unsigned short int m = 0; m < SCREEN_ROW/8; m++){for(unsigned short int n = 0; n < SCREEN_COLUMN; n++){ScreenBuffer[m][n] = 0x00;}}
}/*** ************************************************************************* @brief 设置坐标像素点数据* * @param[in] x 起始点横坐标(x:0~127）* @param[in] y 起始点纵坐标(y:0~63）* @param[in] set_pixel 该点的数据 SET_PIXEL = 1, RESET_PIXEL = 0* * *************************************************************************/
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel)
{ if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {if(set_pixel){ScreenBuffer[y/8][x] |= (0x01 << (y%8));} else{ScreenBuffer[y/8][x] &= ~(0x01 << (y%8));}}
}/*** ************************************************************************* @brief 屏幕内容取反显示* * @param[in] mode 开关* 开 ON 0xA7 点亮全屏* 关 OFF 0xA6 默认此模式，设置像素点亮* * *************************************************************************/
void OLED_DisplayMode(unsigned char mode)
{WriteCmd(mode);
}/*** ************************************************************************* @brief 屏幕亮度调节* * @param[in] intensity 亮度大小（0~255），默认为0x7f* * *************************************************************************/
void OLED_IntensityControl(unsigned char intensity)
{WriteCmd(0x81);WriteCmd(intensity);
}/*** ************************************************************************* @brief 全屏内容偏移指定距离* * @param[in] shift_num 偏移距离（0~63）* * *************************************************************************/
void OLED_Shift(unsigned char shift_num)
{for(unsigned char i = 0; i < shift_num; i++){WriteCmd(0xd3);//设置显示偏移，垂直向上偏移WriteCmd(i);//偏移量HAL_Delay(10);//延时时间}
}/*** ************************************************************************* @brief 屏幕内容水平方向滚动播放* * @param[in] start_page 开始页数 (0~7)* @param[in] end_page 结束页数 (0~7)* @param[in] direction 滚动方向* 左 LEFT 0x27* 右 RIGHT 0x26* @note 在开始页数和结束页数之间的内容才会滚动播放，且写命令顺序不得改变* *************************************************************************/
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction)
{WriteCmd(0x2e); //关闭滚动WriteCmd(direction);//设置滚动方向WriteCmd(0x00);//虚拟字节设置，默认为0x00WriteCmd(start_page);//设置开始页地址WriteCmd(0x05);//设置每个滚动步骤之间的时间间隔的帧频WriteCmd(end_page);//设置结束页地址WriteCmd(0x00);//虚拟字节设置，默认为0x00WriteCmd(0xff);//虚拟字节设置，默认为0xffWriteCmd(0x2f);//开启滚动-0x2f，禁用滚动-0x2e，禁用需要重写数据
}2.3 OLED_Function.h
/*** ************************************************************************* * @file OLED_Function.h* @author zxr* @brief OLED功能函数驱动头文件* * ************************************************************************* @copyright Copyright (c) 2024 zxr * *************************************************************************/
#ifndef _OLED_FUNCTION_H_
#define _OLED_FUNCTION_H_#include "OLED_IIC_Config.h"//字符串显示函数
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize);
//中文汉字显示函数
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch);
//BMP图片显示函数
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[]);#endif /* _OLED_FUNCTION_H_ */2.4 OLED_Function.c
#include "OLED_Function.h"
#include "OLED_Front.h"/*** ************************************************************************* @brief 字符串显示函数* * @param[in] x 起始点横坐标（0~127）* @param[in] y 起始点纵坐标（0~63）* @param[in] ch 字符串（通过双引号引入）* @param[in] TextSize 字符大小（1:6*8 ；2:8*16）* * *************************************************************************/
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize)
{ if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {int32_t c = 0;unsigned char j = 0;switch(TextSize){case 1:{while(ch[j] != '\0'){c = ch[j] - 32;if(c < 0) //无效字符break;if(x >= 125 || (127-x < 6))//一行最大显示字符数：21字节显示,多出两列，不显示 || 剩余列小于6不能显示完整字符，换行显示{x = 0;y += 8;//换行显示if(63 - y < 8) // 不足以显示一行时不显示break;}for(unsigned char m = 0; m < 6; m++){for(unsigned char n = 0; n < 8; n++){OLED_SetPixel(x+m, y+n, (F6x8[c][m] >> n) & 0x01);}}x += 6;j++;}}break;case 2:{while(ch[j] != '\0'){c = ch[j] - 32;if(c < 0) //无效字符break;if(x >= 127 || (127-x < 8))//16字节显示 || 剩余列小于8不能显示完整字符，换行显示{x = 0;y += 16;//换行显示if(63 - y < 16) // 不足以显示一行时不显示break;}for(unsigned char m = 0; m < 2; m++){for(unsigned char n = 0; n < 8; n++){for(unsigned char i = 0; i < 8; i++){OLED_SetPixel(x+n, y+i+m*8, (F8X16[c][n+m*8] >> i) & 0x01);}} }x += 8;j++;}}break;}}OLED_RefreshRAM();
}/*** ************************************************************************* @brief 中文汉字显示函数* * @param[in] x 起始点横坐标（0~127）* @param[in] y 起始点纵坐标（0~63）* @param[in] ch 汉字字模库索引* * @example OLED_ShowCN(0,0,"字");* *************************************************************************/
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch)
{if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {int32_t len = 0,offset = sizeof(F16x16_CN[0].index);while(ch[len] != '\0'){if(x >= 127 || (127-x < 16))//8个汉字显示||剩余列小于16不能显示完整字符，换行显示{x = 0;y += 16;if(63 - y < 16) // 不足以显示一行时不显示break;}//需要处理输入数据大于显示数据的问题for(unsigned char i = 0; i < sizeof(F16x16_CN)/sizeof(GB2312_CN); i++){if(((F16x16_CN[i].index[0] == ch[len]) && (F16x16_CN[i].index[1] == ch[len+1]))){for(unsigned char m = 0; m < 2; m++) //页{for(unsigned char n = 0; n < 16; n++) // 列{for(unsigned char j = 0; j < 8; j++) // 行{OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);}}} x += 16;len += offset;break;}else if(F16x16_CN[i].index[0] == ch[len] && ch[len] == 0x20){for(unsigned char m = 0; m < 2; m++){for(unsigned char n = 0; n < 16; n++){for(unsigned char j = 0; j < 8; j++){OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);} } } x += 16; len++;break;}}}}OLED_RefreshRAM();
}/*** ************************************************************************* @brief BMP图片显示函数* * @param[in] x0 起始点横坐标（0~127）* @param[in] y0 起始点纵坐标（0~63）* @param[in] L BMP图片宽度* @param[in] H BMP图片高度* @param[in] BMP 图片取模地址* * @example OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);* *************************************************************************/
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[])
{if (x0 >= 0 && x0 < SCREEN_COLUMN && x0+L <= SCREEN_ROW &&\y0 >= 0 && y0 < SCREEN_COLUMN && y0+H <= SCREEN_ROW) {unsigned char *p = (unsigned char *)BMP;for(signed short int y = y0; y < y0+H; y+=8){for(signed short int x = x0; x < x0+L; x++){for(signed short int i = 0; i < 8; i++){OLED_SetPixel(x, y+i, ((*p) >> i) & 0x01);}p++;}}}OLED_RefreshRAM();
}2.5 OLED_Front.h
点击查看代码
#ifndef _OLED_FRONT_H_
#define _OLED_FRONT_H_/*** ************************************************************************* @brief 大小6*8的字符取模库* *************************************************************************/
static unsigned char F6x8[][6] =
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 00x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 10x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 20x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 30x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 40x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 50x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 60x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 70x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 80x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 90x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 550x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};/*** ************************************************************************* @brief 大小为8*16的字符取模库* *************************************************************************/
static unsigned char F8X16[][16]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 00x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 10x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 20x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 30x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 40xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 50x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 60x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 70x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 80x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 90x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 100x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 110x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 120x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 130x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 140x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 150x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 160x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 170x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 180x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 190x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 200x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 210x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 220x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 230x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 240x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 250x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 260x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 270x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 280x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 290x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 300x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 310xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 320x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 330x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 340xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 350x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 360x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 370x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 380xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 390x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 400x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 410x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 420x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 430x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 440x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 450x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 460xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 470x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 480xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 490x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 500x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 510x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 520x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 530x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 540xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 550x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 560x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 570x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 580x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 590x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 600x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 610x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 620x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 630x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 640x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 650x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 660x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 670x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 680x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 690x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 700x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 710x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 720x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 730x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 740x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 750x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 760x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 770x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 780x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 790x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 800x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 810x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 820x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 830x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 840x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 850x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 860x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 870x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 880x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 890x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 900x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 910x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 920x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 930x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};/*** ************************************************************************* @brief 汉字字模数据结构* index[] 汉字内码索引。使用UTF-8编码格式时为index[3]；使用GB2312或GBK编码格式时为index[2]；* encoder 点阵码数据* *************************************************************************/
typedef struct { char index[2]; unsigned char encoder[32];
}GB2312_CN;/*** ************************************************************************* @brief GB2312_CN 16*16汉字字模库* 取模设置：共阴、列行式、逆向输出* 数组格式参照代码所示* *************************************************************************/
static GB2312_CN F16x16_CN[] = {{"嵌",0x80,0x80,0xEE,0x88,0x88,0x88,0xE8,0x8F,0x08,0x88,0x78,0x48,0x4E,0x40,0xC0,0x00,0x00,0x00,0x7F,0x24,0x24,0x24,0x7F,0x00,0x81,0x40,0x30,0x0F,0x30,0x41,0x80,0x00,},{"入",0x00,0x00,0x00,0x00,0x00,0x01,0xE2,0x1C,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x03,0x0C,0x30,0x40,0x80,0x80,0x00,},{"式",0x10,0x10,0x90,0x90,0x90,0x90,0x90,0x10,0x10,0xFF,0x10,0x10,0x11,0x16,0x10,0x00,0x00,0x20,0x60,0x20,0x3F,0x10,0x10,0x10,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00,},{"学",0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,},{"习",0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,},};/*** ************************************************************************* @brief astronaut_x 太空人52*48系列（共10张） 图像取模 纵向取模，字节倒序* *************************************************************************/
static unsigned char astronaut_0[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,0xA0,0x60,0x60,0x60,0xA0,0xC0,0x40,0x40,0x80,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x10,0x00,0x00,0x30,0x0C,0x02,0x81,0xE0,0xF0,0xF8,0xFC,0xFC,0xFC,0xFC,0xFE,0xFC,0xFC,0xFC,0xF8,0xF8,0xF1,0xE2,0x04,0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x40,0x00,0x0F,0x60,0x80,0x00,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x60,0x0F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x08,0x10,0x42,0x84,0x04,0x09,0x13,0x17,0x17,0x0F,0x1F,0x6F,0x1F,0x1F,0x1F,0x0F,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x44,0x48,0x90,0x62,0x98,0x00,0xE4,0x08,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x18,0x40,0x04,0x28,0x20,0x98,0xA4,0xA4,0x18,0x40,0x00,0x02,0x00,0x0A,0x04,0x03,0x0C,0xC0,0x00,0x40,0x80,0x01,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x08,0x10,0x42,0x00,0x08,0x38,0x48,0x05,0x24,0x1E,0x09,0x00,0x04,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
static unsigned char astronaut_1[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xE4,0x60,0x20,0x20,0x20,0x00,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x8C,0xC2,0xE1,0xE3,0xF1,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x01,0x02,0x04,0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x00,0xB0,0x70,0x4F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x87,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x3F,0x9F,0x1F,0x1F,0x0B,0x00,0x04,0x03,0x00,0x00,0x04,0x00,0x08,0x01,0x40,0x22,0x14,0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x40,0x80,0x00,0x00,0x00,0x01,0x09,0x26,0xB0,0x20,0xC0,0xA0,0x80,0x00,0x41,0x08,0x05,0x00,0x08,0x05,0x03,0x08,0x80,0x00,0x00,0x00,0x01,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x80,0x08,0x08,0x29,0x26,0x0E,0x00,0x09,0x00,0x05,0x00,0x00,0x02,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_2[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x00,0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB0,0x9C,0xCE,0xC7,0xC1,0xC1,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,0x30,0x81,0x02,0x04,0x10,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0xF0,0x00,0x00,0x00,0x00,0x00,0x80,0xEC,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x7F,0x93,0x10,0x08,0x04,0x04,0x03,0x00,0x00,0x10,0x21,0x40,0x82,0x44,0x28,0x10,0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x1C,0x70,0xA0,0xE0,0x80,0x02,0x92,0x12,0x00,0x00,0x10,0x09,0x06,0x03,0x08,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x08,0x08,0x2F,0x22,0x1E,0x00,0x09,0x00,0x05,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_3[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x8E,0x81,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xC4,0x30,0xC0,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xE2,0x2F,0x20,0x20,0x40,0x00,0x00,0x01,0x04,0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x10,0xF0,0x10,0x08,0x04,0x04,0x03,0x20,0x42,0x06,0x0C,0x38,0xE0,0xC1,0x02,0x04,0x90,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x10,0x20,0x18,0xA4,0xA4,0x18,0x01,0x06,0x08,0x10,0x01,0x0D,0x07,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x00,0x04,0x18,0x24,0x22,0x11,0x01,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x06,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_4[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x40,0x44,0x24,0x24,0x20,0x22,0x20,0x20,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xEC,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x1B,0x04,0x18,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x7C,0xFC,0xF8,0xF8,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xE0,0x1F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x07,0x07,0x0F,0x0F,0x1F,0x10,0x10,0x10,0x10,0x10,0xF0,0x90,0x08,0x38,0x74,0xC2,0x81,0x00,0x00,0x00,0x00,0x01,0x04,0x08,0x10,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x20,0x18,0x00,0x00,0x00,0x02,0x04,0x10,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x16,0x38,0x70,0xF0,0x83,0x8F,0x94,0x28,0x08,0x08,0x14,0xC6,0x19,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x30,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,0x04,0x28,0x04,0x23,0x03,0x11,0x0E,0x45,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_5[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x40,0x40,0x20,0x20,0x20,0x20,0x20,0x60,0x44,0xC4,0x84,0x08,0x10,0x20,0x4C,0x80,0x00,0x00,0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x30,0x1C,0x1E,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x02,0x05,0x0A,0x0C,0x30,0xC1,0x02,0x0C,0x10,0x60,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xF0,0x4F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x0C,0x08,0x10,0x10,0x10,0x00,0x30,0xA0,0x30,0xD0,0x08,0x04,0x02,0x02,0x01,0x00,0x00,0x03,0x06,0x1C,0x38,0xE1,0xE2,0x9C,0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x03,0x18,0x60,0x07,0x3E,0x28,0xB0,0xC0,0x80,0xA0,0x10,0x08,0x00,0x04,0x8A,0x04,0x03,0x0C,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x24,0x28,0x00,0x00,0x00,0x03,0x04,0x18,0x60,0x80,0x00,0x01,0x00,0x01,0x01,0x00,0x01,0x02,0x04,0x08,0x38,0x48,0x47,0x26,0x1E,0x09,0x09,0x04,0x02,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_6[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,0x20,0x20,0x60,0xA0,0x20,0x60,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x0C,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x3F,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xC0,0x00,0x00,0x10,0x20,0x80,0x40,0x40,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x30,0xC0,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x87,0x6F,0x0F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x05,0x08,0x08,0x10,0x10,0x10,0x90,0x60,0x30,0x10,0x10,0x18,0x48,0x14,0x42,0x01,0x09,0x20,0x42,0x84,0x48,0x30,0x40,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x40,0x00,0x00,0x01,0x84,0x89,0x64,0x0C,0x92,0x21,0x02,0x0C,0x01,0x0A,0xC0,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x01,0x02,0x04,0x39,0x4A,0x3C,0x22,0x12,0x01,0x08,0x07,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_7[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,0xE0,0x60,0x60,0x20,0xA0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF0,0x80,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x0F,0x1F,0x1F,0x3F,0x3F,0xBF,0x7F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x04,0x00,0x0E,0x14,0x18,0x10,0x90,0x60,0x20,0x30,0x90,0xD0,0x08,0x04,0x04,0x82,0x01,0x01,0x00,0x82,0x44,0x08,0x10,0xC0,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x0B,0x20,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x40,0x81,0x07,0x1C,0xB0,0xF0,0x01,0x8C,0x08,0x63,0x00,0x00,0x01,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x01,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,0x02,0x00,0x04,0x00,0x18,0x24,0x20,0x12,0x01,0x09,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,};
static unsigned char astronaut_8[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0xC0,0x24,0x20,0x20,0x20,0xA0,0xC0,0xC4,0xC4,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x07,0x03,0x01,0x00,0xE0,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF0,0x80,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x03,0x1F,0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x04,0x04,0x08,0x00,0x10,0x18,0x18,0x10,0x20,0x10,0x10,0x11,0x09,0x05,0x04,0x03,0x00,0x00,0x00,0x03,0x04,0x0A,0xA4,0xE8,0x10,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x04,0x20,0x40,0x23,0x18,0x20,0x80,0x80,0x0A,0x41,0x09,0x00,0x00,0x08,0x84,0x03,0x08,0xA0,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x81,0x04,0x00,0x08,0x30,0x48,0x04,0x23,0x17,0x09,0x04,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,};
static unsigned char astronaut_9[]=
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x88,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x0E,0x07,0x02,0xC0,0xF0,0xF8,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF0,0x80,0x02,0x04,0x10,0x20,0x80,0x00,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x60,0x80,0x00,0x00,0x00,0x0F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x8F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x04,0x08,0x00,0x10,0x11,0x11,0x23,0x23,0x13,0x13,0x93,0x0B,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x45,0x0A,0x64,0xC8,0x10,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x10,0x40,0x01,0x24,0x10,0x40,0x14,0xA0,0x04,0x00,0x00,0x01,0x02,0x88,0x04,0x07,0xB0,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x01,0x02,0x02,0x01,0x01,0x02,0x04,0x00,0x08,0x30,0x48,0x45,0x26,0x1A,0x01,0x08,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};#endif3 功能验证
首先在main.c中引入头文件
/* USER CODE BEGIN Includes */
#include "OLED_IIC_Config.h"
#include "OLED_Function.h"
#include "OLED_Front.h"
/* USER CODE END Includes */
随即根据要求在main函数中添加对应功能函数即可
3.1 显示英文字符
int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_I2C1_Init();OLED_Init(); //OLED初始化OLED_ShowStr(0,0,"OLED-TEXT",1);OLED_ShowStr(0,16,"OLED-TEXT",2);
}
3.2 显示中文汉字
int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_I2C1_Init();OLED_Init(); //OLED初始化OLED_ShowChinese(0,16,"嵌");OLED_ShowChinese(16,16,"入");OLED_ShowChinese(32,16,"式");
}
【注意】使用时应将编译器编码选项选择为GBK系列，否则编译报错，尤其注意通过keil修改后，再用vscode打开看见有乱码时，一定检查一下编译器的编码格式是否为GBK系列
3.3 显示内容垂直偏移指定距离
int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_I2C1_Init();OLED_Init(); //OLED初始化OLED_ShowStr(0,40,"OLED-TEXT",1);OLED_ShowChinese(0,48,"嵌");OLED_ShowChinese(16,48,"入");OLED_ShowChinese(32,48,"式");OLED_Shift(20);
}
3.4 显示内容水平循环滚动
int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_I2C1_Init();OLED_Init(); //OLED初始化OLED_ShowStr(0,0,"OLED-TEXT",1);OLED_ShowChinese(0,16,"嵌");OLED_ShowChinese(16,16,"入");OLED_ShowChinese(32,16,"式");OLED_HorizontalShift(0,3,RIGHT);
}
3.3 显示BMP图片
int main(void)
{HAL_Init();SystemClock_Config();MX_GPIO_Init();MX_I2C1_Init();OLED_Init(); //OLED初始化while (1){OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_1);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_2);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_3);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_4);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_5);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_6);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_7);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_8);OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_9);}
}
这篇关于【STM32+HAL库】---- 硬件IIC驱动0.96OLED的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
