CloudStack全局配置参数

2024-06-14 12:48

本文主要是介绍CloudStack全局配置参数,希望对大家解决编程问题提供一定的参考价值,需要的开发者们随着小编来一起学习吧!

参数描述类型默认值

account.cleanup.interval

清除用户账户所需要等待的时间(秒)整数86400

agent.lb.enabled

If agent load balancing enabled in cluster setuptrue/falsefalse

agent.load.threshold

 Percentage (as a value between 0 and 1) of connected agents after which agent load balancing will start happening小数(0~1)0.7

alert.email.addresses

Alert发送到邮箱地址,以逗号分隔邮箱NULL

alert.email.sender

发送Alert的邮箱地址邮箱NULL

alert.purge.delay

Alert清理时间(秒),清理掉超过该时间的Alert整数0(不清理Alert)

alert.purge.interval

Alert清理线程间隔时间(秒)整数86400

alert.smtp.connectiontimeout

Alert发送邮件smtp socket连接超时时间(毫秒)整数30000(-1则不设定超时)

alert.smtp.host

Alert发送邮件SMTP主机地址主机名NULL

alert.smtp.password

Alert发送邮件SMTP密码,仅在alert.smpt.useAuth为true的时候需要字符串NULL

alert.smtp.port

Alert发送邮件SMTP服务端口端口465

alert.smtp.timeout

Alert发送邮件smtp socket I/O超时时间(毫秒)整数30000(-1则不超时)

alert.smtp.useAuth

Alert发送邮件SMTP服务是否加密true/falseNULL

alert.smtp.username

Alert发送邮件SMTP账户,仅在alert.smtp.useAuth为true的时候有效字符串NULL

alert.wait

Seconds to wait before alerting on a disconnected agenttrue/falseNULL

allow.public.user.templates

允许用户创建public属性的模板true/falsetrue

allow.subdomain.network.access

允许sub domain使用parent domain的专有网络true/falsetrue

allow.user.create.projects

允许用户创建projecttrue/falsetrue

api.throttling.cachesize   

Account based API count cache size整数50000

api.throttling.enabled   

Enable/Disable Api rate limitrue/falsefalse

api.throttling.interval

 Time interval (in seconds) to reset API count整数1

api.throttling.max

Max allowed number of APIs within fixed interval整数25

apply.allocation.algorithm.to.pods

If true, deployment planner applies the allocation heuristics at pods first in the given datacenter during VM resource allocationrue/falsefalse

backup.snapshot.wait

备份快照超时时间(秒整数21600

baremetal.ipmi.fail.retry

ipmi interface will be temporary out of order after power opertions(e.g. cycle, on), it leads following commands fail immediately. The value specifies retry times before accounting it as real failure default  

baremetal.ipmi.lan.interface

option specified in -I option of impitool. candidates are: open/bmc/lipmi/lan/lanplus/free/imb, see ipmitool man page for details. default valule "default" means using default option of ipmitool default   

blacklisted.routes   

Routes that are blacklisted, can not be used for Static Routes creation for the VPC Private Gateway NULL   

capacity.check.period

检查配额时间间隔(毫秒)整数300000

capacity.skipcounting.hours

VM Stop和释放CPU内存资源之间的时间间隔(秒)整数3600

check.pod.cidrs

检查POD是否使用相同CIDR,true的话,不同的POD必须属于不同的CIDRtrue/falsetrue

cloud.dns.name

为GSLB(全局负载均衡)服务提供的DNS名字符串NULL

cluster.cpu.allocated.capacity.disablethreshold

Cluster中CPU分配率上限,CPU分配量/CPU可用量不能超过该值类型:小数(0~1)0.85

cluster.cpu.allocated.capacity.notificationthreshold

Cluster中,CPU分配率报警值,CPU分配量/CPU可用量超过该值则发送Alert类型:小数(0~1)0.75

cluster.localStorage.capacity.notificationthreshold

Cluster中,localStorage分配率报警值,localStorage分配量/localStorage可用量超过该值则发送Alert类型:小数(0~1)0.75

cluster.memory.allocated.capacity.disablethreshold

Cluster中memory分配率上限,memory分配量/memory可用量不能超过该值类型:小数(0~1)0.85

cluster.memory.allocated.capacity.notificationthreshold

Cluster中,memory分配率报警值,memory分配量/memory可用量超过该值则发送Aler类型:小数(0~1)0.75

cluster.message.timeout.seconds

 Time (in seconds) to wait before a inter-management server message post times out.整数300

cluster.storage.allocated.capacity.notificationthreshold

Cluster中,storage分配率报警值,storage分配量/storage可用量超过该值则发送Alert类型:小数(0~1)0.75

cluster.storage.capacity.notificationthreshold

Cluster中,storage使用率报警值,storage使用量/storage总量超过该值则发送Alert类型:小数(0~1)0.75

concurrent.snapshots.threshold.perhost

每台主机并发执行的Snapshot线程数整数NULL(不限制)

consoleproxy.capacity.standby

Console proxy最小备用Session数,用来保证系统是否能及时提供服务整数10

consoleproxy.capacityscan.interval

Console proxy定期检查时间间隔(秒),系统定期检查是否需要更多的Console proxy来保证最小备用量整数30000

consoleproxy.cmd.port

Console proxy和management Server通信端口端口8001

consoleproxy.disable.rpfilter

禁用Console proxy VM public IP的rp_filtertrue/falsetrue

consoleproxy.launch.max

一个zone可以拥有的最大Console proxy实例数整数10

consoleproxy.loadscan.interval

Console proxy负载检查时间间隔(毫秒)整数10000

consoleproxy.management.state   

console proxy service management state Auto   

consoleproxy.management.state.last

last console proxy service management state Auto   

consoleproxy.restart

Console proxy restart flag, defaulted to truetrue/falsetrue

consoleproxy.service.offering

Console proxy计算服务类型计算服务UUIDNULL(使用系统默认类型)

consoleproxy.session.max

每个Console proxy拥有的最大Session数整数50

consoleproxy.session.timeout

Console proxy Session超时时间(毫秒)整数30000

consoleproxy.url.domain

Console proxy URL domaindomain namerealhostip.com(必须可以访问到此域名)

control.cidr

用于control network通信,默认为link-local,每个POD必须唯一CIDR169.254.0.0/16

control.gateway

control network 网关IP169.254.0.1

copy.volume.wait

磁盘copy超时时间整数10800

cpu.overprovisioning.factor

CPU超配倍数,CPU可用量=CPU总量*超配倍数整数1(不超配)

create.private.template.from.snapshot.wait

从快照创建模板超时时间(秒)整数10800

create.private.template.from.volume.wait

从卷创建模板超时时间(秒)整数10800

create.volume.from.snapshot.wait

从快照创建卷超时时间(秒)整数10800

custom.diskoffering.size.max

允许用户创建磁盘最大值(GB)整数1024

custom.diskoffering.size.min

允许用户创建磁盘最小值(GB)整数1

default.page.size

list API默认一页大小整数500
detail.batch.query.size    Default entity detail batch query size for listing整数2000   

developer

开发者模式true/falsetrue
direct.agent.load.size    The number of direct agents to load each time整数16   
direct.agent.pool.size    Default size for DirectAgentPool整数500   
direct.agent.scan.interval    Time interval (in seconds) to run the direct agent scan task.整数90   
direct.attach.network.externalIpAllocator.enabled    Direct-attach VMs using external DHCP servertrue/falsefalse   
direct.attach.network.externalIpAllocator.url    Direct-attach VMs using external DHCP server (API url) NULL   
direct.network.no.default.route    Direct Network Dhcp Server should not send a default routetrue/falsefalse   

direct.network.stats.interval

在Traffic Monitor采集数据间隔时间整数86400

disable.extraction

禁用模板/ISO下载true/falsefalse
eip.use.multiple.netscalers    Should be set to true, if there will be multiple NetScaler devices providing EIP service in a zonetrue/falsefalse   
enable.baremetal.securitygroup.agent.echo After starting provision process, periodcially echo security agent installed in the template. Treat provisioning as success only if echo successfullytrue/falsefalse
enable.dynamic.scale.vmEnables/Diables dynamically scaling a vmtrue/falsefalse

enable.ec2.api

启用EC2 APItrue/falsefalse

enable.ha.storage.migration

启用HA过程中,对主存储动态迁移true/falsetrue

enable.s3.api

启用S3 APItrue/falsefalse

enable.usage.server

启用Usage Servertrue/falsetrue

encode.api.response

对API请求进行URL转码true/falsefalse
endpointe.urlEndpointe Url  http://localhost:8080/client/api
event.purge.delayEvents older than specified number days will be purged. Set this value to 0 to never delete events整数15

event.purge.interval

Event清理线程允许时间间隔(秒)整数86400

execute.in.sequence.hypervisor.commands

hyperviser执行command(StartCommand, StopCommand, CopyCommand)是否序列化,true则顺序执行,false则同时执行true/falsetrue

execute.in.sequence.network.element.commands

执行网络节点command(DhcpEntryCommand, SavePasswordCommand, UserDataCommand, VmDataCommand)是否序列化,true则顺序执行,false则同时执行true/falsetrue

expunge.delay

清理VM等待时间(秒),默认=expunge.interval整数86400

expunge.interval

清理VM线程允许时间间隔(秒)整数86400

expunge.workers

清理VM线程数整数1
external.baremetal.resource.classnameclass name for handling external baremetal resource NULL   
external.baremetal.system.url    url of external baremetal system that CloudStack will talk toURLNULL   
external.firewall.default.capacity    default number of networks permitted per external load firewall device整数50   
external.lb.default.capacitydefault number of networks permitted per external load balancer device整数50   
external.network.stats.intervalInterval (in seconds) to report external network statistics.整数300   
extract.url.cleanup.interval    The interval (in seconds) to wait before cleaning up the extract URL's整数7200   
extract.url.expiration.interval    The life of an extract URL after which it is deleted整数14400   
guest.vlan.bits    The number of bits to reserve for the VLAN identifier in the guest subnet.整数12   

ha.tag

HA tag,含有该tag的HOST,只能用于HA字符串   

ha.workers

HA线程数整数5
healthcheck.update.interval    Time Interval to fetch the LB health check states (in sec)整数600   

host

management Server IP(用于管理网段)IP初始化DB的时候自动获取

host.capacityType.to.order.clusters

主机资源类型,用于deployment planner分配VM资源时为Cluster排序CPU/RAMCPU

host.reservation.release.period

主机预留资源检查时间间隔(毫秒)整数300000

host.retry

在某Host上创建卷的重试此时整数2

host.stats.interval

Host stats获取时间间隔(毫秒)整数60000

hypervisor.list

该版本支持的Hyperviser ListKVM, XenServer, VMware, BareMetal, Ovm, LXCKVM, XenServer, VMware, BareMetal, Ovm, LXC

incorrect.login.attempts.allowed

登陆错误尝试次数,超过则user会被禁用整数5

instance.name

创建VM的名字后缀字符串VM

integration.api.port

API端口端口8096
internallbvm.service.offering Uuid of the service offering used by internal lb vm; if NULL - default system internal lb offering will be used NULL   
interval.baremetal.securitygroup.agent.echo   
Interval to echo baremetal security group agent, in seconds整数10   
investigate.retry.interval    Time (in seconds) between VM pings when agent is disconnected整数60   
job.cancel.threshold.minutesTime (in minutes) for async-jobs to be forcely cancelled if it has been in process for long整数60   
job.expire.minutes    Time (in minutes) for async-jobs to be kept in system整数1440   
json.content.type      Http response content type for .js files (default is text/javascript) text/javascript

kvm.snapshot.enabled

是否启用KVM 的VM快照功能true/falsefalse

kvm.ssh.to.agent

是否允许Management Server以SSH方式登录KVM agent;类型:true/falsetrue/falsetrue

management.network.cidr

管理网段CIDRCIDR自动获取当前host ip的cidr

max.account.cpus

一个用户所能分配的最大CPU数量整数40

max.account.memory

一个用户所能分配的最大内存大小(MB)整数40960

max.account.networks

一个用户最多能创建的网络数量整数20

max.account.primary.storage

一个用户所能分配的最大存储大小(GB)整数200

max.account.public.ips

用户最多拥有的public IP数量整数20

max.account.secondary.storage

一个用户所能分配的最大二级存储大小(GB)整数400

max.account.snapshots

用户最多创建的Snapshot数量整数20

max.account.templates

用户最多创建的模板数量整数20

max.account.user.vms

用户最多创建的VM数量整数20

max.account.volumes

用户最多创建的卷数量整数20

max.account.vpcs

用户最多分配的VCPU数量整数20

max.project.cpus

一个项目能分配的最大CPU数量整数40

max.project.memory

一个项目能分配的最大内存大小(MB)整数40960

max.project.networks

一个项目能创建的最大Network数整数20

max.project.primary.storage

一个项目能分配的最大存储大小(GB)整数200

max.project.public.ips

一个项目能拥有的最大public ip数量整数20

max.project.secondary.storage

一个项目能分配的最大二级存储大小(GB)整数400

max.project.snapshots

一个project能创建的最大快照数整数20

max.project.templates

一个project能创建的最大模板数整数20

max.project.user.vms

一个project能创建的最大VM数整数20

max.project.volumes

一个project能创建的最大卷数量整数20

max.project.vpcs

一个project可以创建的最大VPC数整数20

max.template.iso.size

最大模板/ISOsize(GB)整数50

mem.overprovisioning.factor

内存超配倍数,内存可用量=内存总量*超配倍数整数1(不超配)

midonet.apiserver.address

指定Midonet API Server(如果使用Midonet)URLhttp://localhost:8081

midonet.providerrouter.id

使用Midonet的情况下,指定Modonet provider router的uuidUUIDd7c5e6a3-e2f4-426b-b728-b7ce6a0448e5(未测试,此值来自DB)

migrate.retry.interval

migrate重试时间间隔(秒)整数120

migratewait

migrate超时时间(秒)整数3600

mount.parent

二级存储在Management Server上的挂载点Linux 路径/mnt

network.disable.rpfilter

Domain Router VM public网络禁用rp_filtertrue/falsetrue
network.dns.basiczone.updates   This parameter can take 2 values: all (default) and pod. It defines if DHCP/DNS requests have to be send to all dhcp servers in cloudstack, or only to the one in the same pod all   
network.gc.interval    Seconds to wait before checking for networks to shutdown整数600   
network.gc.wait Time (in seconds) to wait before shutting down a network that's not in used整数600   
network.guest.cidr.limit size limit for guest cidr; can't be less than this value整数22
network.ipv6.search.retry.max    The maximum number of retrying times to search for an available IPv6 address in the table整数10000   
network.loadbalancer.basiczone.elb.enabled    The maximum number of retrying times to search for an available IPv6 address in the tabletrue/falsefalse   
network.loadbalancer.basiczone.elb.gc.interval.minutes      Garbage collection interval to destroy unused ELB vms in minutes. Minimum of 5整数30 
network.loadbalancer.basiczone.elb.network    Whether the elastic load balancing service public ips are taken from the public or guest network guest   
network.loadbalancer.basiczone.elb.vm.cpu.mhz    CPU speed for the elastic load balancer vm整数128   
network.loadbalancer.basiczone.elb.vm.ram.sizeMemory in MB for the elastic load balancer vm整数128   
network.loadbalancer.basiczone.elb.vm.vcpu.numNumber of VCPU  for the elastic load balancer vm整数1

network.loadbalancer.haproxy.max.conn

LB(HAProxy)当前链接的最大数整数4096
network.loadbalancer.haproxy.stats.auth    Load Balancer(haproxy) authetication string in the format username:password admin1:AdMiN123 
network.loadbalancer.haproxy.stats.port    Load Balancer(haproxy) stats port number.端口8081   
network.loadbalancer.haproxy.stats.uri        Load Balancer(haproxy) uri. /admin?stats
network.loadbalancer.haproxy.stats.visibility   Load Balancer(haproxy) stats visibilty, the value can be one of the following six parameters : global,guest-network,link-local,disabled,all,default global   
network.lock.timeout    Lock wait timeout (seconds) while implementing network整数600   
network.securitygroups.work.cleanup.interval   Time interval (seconds) in which finished work is cleaned up from the work table整数120   
network.securitygroups.work.lock.timeout   Lock wait timeout (seconds) while updating the security group work queue整数300   
network.securitygroups.work.per.agent.queue.size      The number of outstanding security group work items that can be queued to a host. If exceeded, work items will get dropped to conserve memory. Security Group Sync will take care of ensuring that the host gets updated eventually整数100 
network.securitygroups.workers.pool.size   
Number of worker threads processing the security group update work queue整数50   
network.throttling.rate   
Default data transfer rate in megabits per second allowed in network.整数200   
ping.interval  
Ping interval in seconds整数60   
ping.timeout       Multiplier to ping.interval before announcing an agent has timed out浮点数2.5

pod.privateip.capacity.notificationthreshold

POD中私有IP分配率告警值,超过此值则发送Alert小数(0~1)0.75

pool.storage.allocated.capacity.disablethreshold

主存储已分配比率上限,超过此值则不能继续分配主存储小数(0~1)0.85

pool.storage.capacity.disablethreshold

主存储已使用比率上限,超过此值则不能继续分配主存储小数(0~1)0.85
port    Port to listen on for agent connection.端口8250  

primary.storage.download.wait

在二级存储向主存储传输模板超时时间(秒);类型:整数;默认10800整数 
project.email.sender    Sender of project invitation email (will be in the From header of the email)邮箱NULL   

project.invite.required

添加一个用户到project的时候,是否发送请求true/falsefalse

project.invite.timeout

添加用户邀请超时时间整数86400
project.smtp.host    SMTP hostname used for sending out email project invitations NULL   
project.smtp.passwordPassword for SMTP authentication (applies only if project.smtp.useAuth is true) NULL   
project.smtp.port Port the SMTP server is listening on端口 
project.smtp.useAuthIf true, use SMTP authentication when sending emailstrue/falseNULL   
project.smtp.username Username for SMTP authentication (applies only if project.smtp.useAuth is true) NULL   

recreate.systemvm.enabled

是否在启动系统虚拟机的时候,重建root卷true/falsefalse
remote.access.vpn.client.iprange        The range of ips to be allocated to remote access vpn clients. The first ip in the range is used by the VPN server 10.1.2.1-10.1.2.8
remote.access.vpn.psk.length    The length of the ipsec preshared key (minimum 8, maximum 256)整数24   
remote.access.vpn.user.limitThe maximum number of VPN users that can be created per account整数8
resourcecount.check.interval  Time (in seconds) to wait before retrying resource count check task. Default is 0 which is to never run the task整数0

restart.retry.interval

VM重启超时时间(秒)整数600
router.check.interval    Interval (in seconds) to report redundant router status.整数30   
router.check.poolsize    Numbers of threads using to check redundant router status.整数10   

router.cpu.mhz

vrouter默认CPU速度(MHz)整数500
router.extra.public.nics   specify extra public nics used for virtual router(up to 5)整数2   
router.stats.interval   Interval (in seconds) to report router statistics.整数300   

router.template.hyperv

HyperV环境的vrouter模板名字模板名字SystemVM Template (HyperV)

router.template.kvm

KVM环境的vrouter模板名字模板名字SystemVM Template (KVM)

router.template.lxc

LXC环境的vrouter模板名字模板名字SystemVM Template (LXC)

router.template.vmware

Vmware环境的vrouter模板模板名字SystemVM Template (vSphere)

router.template.xen

XenServer环境的vrouter模板模板名字SystemVM Template (XenServer)

s3.rrs.enabled

启用S3 RRStrue/falsefalse
s3.singleupload.max.size    The maximum size limit for S3 single part upload API(in GB). If it is set to 0, then it means always use multi-part upload to upload object to S3. If it is set to -1, then it means always use single-part upload to upload object to S3.整数5   

sdn.ovs.controller

对L2-in-L3网络,启用Open vSwitch SDN controllertrue/falsefalse

sdn.ovs.controller.default.label

对GRE endpoint使用网卡的默认Network labelNetwork Labelcloud-public

secstorage.allowed.internal.sites

环境中,private IP相同网段上传模板/ISO需要在此设置该网段的CIDR,以逗号分隔,0.0.0.0是非法字段CIDRNULL
secstorage.capacity.standby   The minimal number of command execution sessions that system is able to serve immediately(standby capacity)整数10   
secstorage.cmd.execution.time.max    The max command execution time in minute整数30   
secstorage.encrypt.copy    Use SSL method used to encrypt copy traffic between zonestrue/falsetrue   

secstorage.proxy

二级存储虚拟机代理http://username:password@proxyserver:portNULL

secstorage.service.offering

二级存储虚拟机计算服务类型计算服务UUIDNULL(使用默认服务)
secstorage.session.max    The max number of command execution sessions that a SSVM can handle整数50   
secstorage.ssl.cert.domain     SSL certificate used to encrypt copy traffic between zones realhostip.com  
secstorage.vm.mtu.size    MTU size (in Byte) of storage network in secondary storage vms整数1500   
security.singlesignon.key        A Single Sign-On key used for logging into the cloud s3ZbaX1_Oc1scuMuT3MDsKYUIRtF1ob1e2AtTYFLjZp-NPQwJa4g_PYsQwodJxV8h5qXNnkGPaSmbUsnX7z_kQ
security.singlesignon.tolerance.millis    The allowable clock difference in milliseconds between when an SSO login request is made and when it is received.整数300000   
site2site.vpn.customergateway.subnets.limit    The maximum number of subnets per customer gateway整数10   
site2site.vpn.vpngateway.connection.limit    The maximum number of VPN connection per VPN gateway整数4   

snapshot.backup.rightafter

在Snapshot完成后,立刻进行备份true/falsetrue

snapshot.delta.max

两次全量快照之间,最多的增量快照数整数16

snapshot.max.daily

每天最多快照数整数8

snapshot.max.hourly

每小时最多快照数整数8

snapshot.max.monthly

每月最多快照数整数8

snapshot.max.weekly

每周最多快照数整数8

snapshot.poll.interval   

The time interval in seconds when the management server polls for snapshots to be scheduled.整数300   
sortkey.algorithm    Sort algorithm for those who use sort key(template, disk offering, service offering, network offering), true means ascending sort while false means descending sorttrue/falsefalse   

start.retry

Create 和Start VM重试次数整数10

stop.retry.interval

两次重试Stop或Destroy VM的间隔时间(秒)整数600
storage.cache.replacement.enabled    enable or disable cache storage replacement algorithm.true/falsetrue   
storage.cache.replacement.interval   time interval between cache replacement threads (in seconds).整数86400   
storage.cache.replacement.lru.interval    time interval for unused data on cache storage (in days).整数30   

storage.cleanup.enabled

启用清理存储线程true/falsetrue

storage.cleanup.interval

清理存储线程运行时间间隔(秒)整数86400

storage.max.volume.size

volume最大size(GB)整数2000

storage.max.volume.upload.size

上传Volume最大size(GB)整数500

storage.overprovisioning.factor

主存储超配倍数,主存储可用量=主存储总量*超配倍数整数2
storage.pool.max.waitseconds    Timeout (in seconds) to synchronize storage pool operations.整数3600   
storage.stats.interval     The interval (in milliseconds) when storage stats (per host) are retrieved from agents.整数60000  
storage.template.cleanup.enabled    Enable/disable template cleanup activity, only take effect when overall storage cleanup is enabledtrue/falsetrue   

sync.interval

集群状态sync时间间隔(秒)整数60
system.vm.auto.reserve.capacityIndicates whether or not to automatically reserver system VM standby capacity.true/falsetrue
system.vm.default.hypervisorHypervisor type used to create system vm NULL

system.vm.random.password

系统虚拟机第一次启动时自动修改随机密码true/falsefalse

system.vm.use.local.storage

系统虚拟机使用本地存储true/falsefalse
task.cleanup.retry.intervalTime (in seconds) to wait before retrying cleanup of tasks if the cleanup failed previously.  0 means to never retry.整数600   
timeout.baremetal.securitygroup.agent.echo    Timeout to echo baremetal security group agent, in seconds, the provisioning process will be treated as a failure整数3600   
total.retriesThe number of times each command sent to a host should be retried in case of failure.整数4
traffic.sentinel.exclude.zones        Traffic going into specified list of zones is not metered  
traffic.sentinel.include.zones   Traffic going into specified list of zones is metered. For metering all traffic leave this parameter empty EXTERNAL   
ucs.sync.blade.interval    the interval cloudstack sync with UCS manager for available blades in case user remove blades from chassis without notifying CloudStack整数3600   
update.wait    Time to wait (in seconds) before alerting on a updating agent整数600   
usage.aggregation.timezoneThe timezone to use for usage stats aggregation GMT   
usage.execution.timezone    The timezone to use for usage job execution time NULL   
usage.sanity.check.intervalInterval (in days) to check sanity of usage data整数NULL   
usage.stats.job.aggregation.range   The range of time for aggregating the user statistics specified in minutes (e.g. 1440 for daily, 60 for hourly.整数1440   
usage.stats.job.exec.timeThe time at which the usage statistics aggregation job will run as an HH24:MM time, e.g. 00:30 to run at 12:30am. 00:15
use.external.dnsBypass internal dns, use external dns1 and dns2true/falsefalse
use.system.guest.vlansIf true, when account has dedicated guest vlan range(s), once the vlans dedicated to the account have been consumed vlans will be allocated from the system pooltrue/falsetrue   
use.system.public.ips   If true, when account has dedicated public ip range(s), once the ips dedicated to the account have been consumed ips will be acquired from the system pooltrue/falsetrue   

vm.allocation.algorithm

vm分配算法'random', 'firstfit', 'userdispersing', 'userconcentratedpod_random', 'userconcentratedpod_firstfit'random

vm.deployment.planner

vm部署策略'FirstFitPlanner', 'UserDispersingPlanner', 'UserConcentratedPodPlanner'FirstFitPlanner
vm.destroy.forcestop    On destroy, force-stop takes this valuetrue/falsefalse   

vm.disk.stats.interval

vm磁盘状态获取的时间间隔整数0(不获取状态)

vm.disk.throttling.bytes_read_rate

vm磁盘读速度限制(bytes/second)整数0(不限制)

vm.disk.throttling.bytes_write_rate

vm磁盘写速度限制(bytes/second)整数0(不限制)

vm.disk.throttling.iops_read_rate

vm磁盘每秒读请求次数限制整数0(不限制)

vm.disk.throttling.iops_write_rate

vm磁盘每秒写请求次数限制整数0(不限制)
vm.instancename.flag    If set to true, will set guest VM's name as it appears on the hypervisor, to its hostnametrue/falsefalse  
vm.network.throttling.rate    Default data transfer rate in megabits per second allowed in User vm's default network.整数200   
vm.op.cancel.interval   Time (in seconds) to wait before cancelling a operation整数3600   
vm.op.cleanup.interval    Interval to run the thread that cleans up the vm operations (in seconds)整数86400   
vm.op.cleanup.wait    Time (in seconds) to wait before cleanuping up any vm work items整数3600   
vm.op.lock.state.retry    Times to retry locking the state of a VM for operations整数5   
vm.op.wait.interval    Time (in seconds) to wait before checking if a previous operation has succeeded整数120   

vm.stats.interval

vm当前状态获取时间间隔(毫秒)整数60000
vm.tranisition.wait.interval   
Time (in seconds) to wait before taking over a VM in transition state整数3600   
vm.user.dispersion.weight   Weight for user dispersion heuristic (as a value between 0 and 1) applied to resource allocation during vm deployment. Weight for capacity heuristic will be (1 - weight of user dispersion)整数1   

vmsnapshot.create.wait

Vmware虚拟机快照创建超时时间(秒)整数1800

vmsnapshot.max

一台Vmware虚拟机拥有的最大快照数量(虚拟机快照)整数10
vmware.additional.vnc.portrange.size    Start port number of additional VNC port range整数1000   
vmware.additional.vnc.portrange.start    Start port number of additional VNC port range整数50000   

vmware.create.full.clone

Vmware虚拟机创建模式(full clone),如果true,则创建vm的时候,磁盘完整复制,如果false则以delta格式创建true/falsetrue
vmware.hung.wokervm.timeout    Worker VM timeout in seconds整数7200   
vmware.management.portgroup        Specify the management network name(for ESXi hosts) Management Network

vmware.nested.virtualization

启用Vmware嵌套虚拟化true/falsefalse
vmware.ports.per.dvportgroup    Default number of ports per Vmware dvPortGroup in VMware environment整数256   
vmware.recycle.hung.wokervm    Specify whether or not to recycle hung worker VMstrue/falsefalse   
vmware.reserve.cpu    Specify whether or not to reserve CPU based on CPU overprovisioning factortrue/falsefalse   
vmware.reserve.mem Specify whether or not to reserve memory based on memory overprovisioning factortrue/falsefalse

vmware.root.disk.controller

Vmware环境中VM Root卷类型scsi, ideide
vmware.service.consoleSpecify the service console network name(for ESX hosts) Service Console   

vmware.systemvm.nic.device.type

Vmware环境中,system vm网卡类型E1000, PCNet32, Vmxnet2, Vmxnet3E1000

vmware.use.dvswitch

Vmware环境中,启动或禁用 Nexus/Vmware dvSwitchtrue/falsefalse

vmware.use.nexus.vswitch

Vmware环境中,启动或禁用 Cisco Nexus 1000v vSwitchtrue/falsefalse
vpc.cleanup.intervalThe interval (in seconds) between cleanup for Inactive VPCs整数3600   
vpc.max.networksMaximum number of networks per vpc整数3

wait

control commands返回超时时间(秒)整数1800
workersNumber of worker threads.整数5

xapiwait

Xenserver API返回超时时间(秒)整数600
xen.bond.storage.nics   Attempt to bond the two networks if found NULL   

xen.heartbeat.interval

XenServer自检间隔时间(秒)整数60

xen.nics.max

XenServer VM 允许的最大网卡数整数7

xen.pvdriver.version

XenServer环境中,pvdriver版本xenserver56, xenserver61xenserver61
xen.setup.multipathSetup the host to do multipathtrue/falsefalse
zone.directnetwork.publicip.capacity.notificationthresholdPercentage (as a value between 0 and 1) of Direct Network Public Ip Utilization above which alerts will be sent about low number of direct network public ips.小数(0~1) 0.75  
zone.secstorage.capacity.notificationthresholdPercentage (as a value between 0 and 1) of secondary storage utilization above which alerts will be sent about low storage available.小数(0~1) 0.75  
zone.virtualnetwork.publicip.capacity.notificationthresholdPercentage (as a value between 0 and 1) of public IP address space utilization above which alerts will be sent.小数(0~1) 0.75  
zone.vlan.capacity.notificationthreshold    Percentage (as a value between 0 and 1) of Zone Vlan utilization above which alerts will be sent about low number of Zone Vlans.小数(0~1) 0.75  
scale.retryNumber of times to retry scaling up the vm整数2
guest.domain.suffix        Default domain name for vms inside virtualized networks fronted by router cloud.internal
network.dhcp.nondefaultnetwork.setgateway.guestos       The guest OS's name start with this fields would result in DHCP server response gateway information even when the network it's on is not default network. Names are separated by comma. Windows
network.securitygroups.defaultadding   If true, the user VM would be added to the default security group by defaulttrue/falsetrue   
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    



这篇关于CloudStack全局配置参数的文章就介绍到这儿,希望我们推荐的文章对编程师们有所帮助!



http://www.chinasem.cn/article/1060450

相关文章

Zookeeper安装和配置说明

一、Zookeeper的搭建方式 Zookeeper安装方式有三种,单机模式和集群模式以及伪集群模式。 ■ 单机模式:Zookeeper只运行在一台服务器上,适合测试环境; ■ 伪集群模式:就是在一台物理机上运行多个Zookeeper 实例; ■ 集群模式:Zookeeper运行于一个集群上,适合生产环境,这个计算机集群被称为一个“集合体”(ensemble) Zookeeper通过复制来实现

CentOS7安装配置mysql5.7 tar免安装版

一、CentOS7.4系统自带mariadb # 查看系统自带的Mariadb[root@localhost~]# rpm -qa|grep mariadbmariadb-libs-5.5.44-2.el7.centos.x86_64# 卸载系统自带的Mariadb[root@localhost ~]# rpm -e --nodeps mariadb-libs-5.5.44-2.el7

hadoop开启回收站配置

开启回收站功能,可以将删除的文件在不超时的情况下,恢复原数据,起到防止误删除、备份等作用。 开启回收站功能参数说明 (1)默认值fs.trash.interval = 0,0表示禁用回收站;其他值表示设置文件的存活时间。 (2)默认值fs.trash.checkpoint.interval = 0,检查回收站的间隔时间。如果该值为0,则该值设置和fs.trash.interval的参数值相等。

NameNode内存生产配置

Hadoop2.x 系列,配置 NameNode 内存 NameNode 内存默认 2000m ,如果服务器内存 4G , NameNode 内存可以配置 3g 。在 hadoop-env.sh 文件中配置如下。 HADOOP_NAMENODE_OPTS=-Xmx3072m Hadoop3.x 系列,配置 Nam

wolfSSL参数设置或配置项解释

1. wolfCrypt Only 解释:wolfCrypt是一个开源的、轻量级的、可移植的加密库,支持多种加密算法和协议。选择“wolfCrypt Only”意味着系统或应用将仅使用wolfCrypt库进行加密操作,而不依赖其他加密库。 2. DTLS Support 解释:DTLS(Datagram Transport Layer Security)是一种基于UDP的安全协议,提供类似于

Andrej Karpathy最新采访:认知核心模型10亿参数就够了,AI会打破教育不公的僵局

夕小瑶科技说 原创  作者 | 海野 AI圈子的红人,AI大神Andrej Karpathy,曾是OpenAI联合创始人之一,特斯拉AI总监。上一次的动态是官宣创办一家名为 Eureka Labs 的人工智能+教育公司 ,宣布将长期致力于AI原生教育。 近日,Andrej Karpathy接受了No Priors(投资博客)的采访,与硅谷知名投资人 Sara Guo 和 Elad G

C++11第三弹:lambda表达式 | 新的类功能 | 模板的可变参数

🌈个人主页: 南桥几晴秋 🌈C++专栏: 南桥谈C++ 🌈C语言专栏: C语言学习系列 🌈Linux学习专栏: 南桥谈Linux 🌈数据结构学习专栏: 数据结构杂谈 🌈数据库学习专栏: 南桥谈MySQL 🌈Qt学习专栏: 南桥谈Qt 🌈菜鸡代码练习: 练习随想记录 🌈git学习: 南桥谈Git 🌈🌈🌈🌈🌈🌈🌈🌈🌈🌈🌈🌈🌈�

如何在页面调用utility bar并传递参数至lwc组件

1.在app的utility item中添加lwc组件: 2.调用utility bar api的方式有两种: 方法一,通过lwc调用: import {LightningElement,api ,wire } from 'lwc';import { publish, MessageContext } from 'lightning/messageService';import Ca

【Python编程】Linux创建虚拟环境并配置与notebook相连接

1.创建 使用 venv 创建虚拟环境。例如,在当前目录下创建一个名为 myenv 的虚拟环境: python3 -m venv myenv 2.激活 激活虚拟环境使其成为当前终端会话的活动环境。运行: source myenv/bin/activate 3.与notebook连接 在虚拟环境中,使用 pip 安装 Jupyter 和 ipykernel: pip instal

4B参数秒杀GPT-3.5:MiniCPM 3.0惊艳登场!

​ 面壁智能 在 AI 的世界里,总有那么几个时刻让人惊叹不已。面壁智能推出的 MiniCPM 3.0,这个仅有4B参数的"小钢炮",正在以惊人的实力挑战着 GPT-3.5 这个曾经的AI巨人。 MiniCPM 3.0 MiniCPM 3.0 MiniCPM 3.0 目前的主要功能有: 长上下文功能:原生支持 32k 上下文长度,性能完美。我们引入了