本文主要是介绍通过u盘启动禁用驱动签名和PG，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
EfiGuard下载地址
https://github.com/Mattiwatti/EfiGuard
使用步骤
Booting the loader
1、Download EfiGuard and rename EFI/Boot/Loader.efi to bootx64.efi.
2、Place the files on a boot drive such as a FAT32 formatted USB stick (for physical machines) or an ISO/virtual disk (for VMs). Assuming drive X:, the paths for the two files should now be X:/EFI/Boot/{bootx64|EfiGuardDxe}.efi
3、Boot the machine from the drive you used in step 2. Most firmwares provide a boot menu to do this via F8/F10/F11/F12. If not, you will need to configure the BIOS to boot from the new drive.
4、Windows should now boot, and you should see EfiGuard messages during boot.
5、If you booted with the SetVariable hook (the default), run EfiDSEFix.exe -d from an Administrator command prompt after boot to disable DSE, or run EfiDSEFix.exe to see the full list of options.
翻译：
1、下载EfiGuard，解压后，重命名 EFI/Boot/Loader.efi --> EFI/Boot/bootx64.efi
2、将u盘格式化为FAT32，把解压后文件放到u盘，目录结构为 ?:/EFI/Boot/bootx64.efi
3、重启进入bios，通过u盘启动，可能会重启2次
4、进入系统后，管理员打开cmd，进入到u盘盘符，执行EfiDSEFix.exe -d，即可关闭驱动签名，加载无签名的驱动文件
这篇关于通过u盘启动禁用驱动签名和PG的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
