本文主要是介绍华为和锐捷设备流统配置，希望对大家解决编程问题提供一定的参考价值，需要的开发者们随着小编来一起学习吧！
华为：
<AR6121E-S>dis acl 3333
Advanced ACL 3333, 4 rules
Acl's step is 5
rule 5 permit icmp source 192.168.188.2 0 destination 192.168.88.88 0
rule 10 permit icmp source 192.168.88.88 0 destination 192.168.188.2 0
rule 15 permit udp source 14.23.154.114 0 source-port eq 1701 destination 14.145.146.57 0 (7 matches)
rule 20 permit udp source 14.145.146.57 0 destination 14.23.154.114 0 destination-port eq 1701 (7 matches)
int g0/0/8
traffic-filter inbound acl 3333
traffic-filter outbound acl 3333
[AR6121E-S]capture-packet interface g 0/0/8 acl 3333 destination terminal
锐捷：
注意：以下ip地址仅为举例，以现场实际ip地址为准
第一步：创建ACL
ip access-list extended test-down-in
10 permit icmp host 104.52.56.14 host 172.26.131.30
20 permit icmp host 172.26.131.30 host 104.52.56.14
100 permit ip any any
!
ip access-list extended test-down-out
10 permit icmp host 104.52.56.14 host 172.26.131.30
20 permit icmp host 172.26.131.30 host 104.52.56.14
100 permit ip any any
!
ip access-list extended test-up-in
10 permit icmp host 104.52.56.14 host 172.26.131.30
20 permit icmp host 172.26.131.30 host 104.52.56.14
100 permit ip any any
!
ip access-list extended test-up-out
10 permit icmp host 104.52.56.14 host 172.26.131.30
20 permit icmp host 172.26.131.30 host 104.52.56.14
100 permit ip any any
！
第二步：开启ACL计数
!
ip access-list counter test-up-in
!
ip access-list counter test-up-out
!
ip access-list counter test-down-out
!
ip access-list counter test-down-in
第三步：
上下联口调用ACL：
上联口（连接路由器的接口）
比如连接的是g0/1(以具体连接的接口为准)
int g0/1
ip access-group test-up-in in
ip access-group test-up-out out
下连口（连接电脑的接口）
ip access-group test-down-in in
ip access-group test-down-out out
第四步：
查看计数：show access-lists
清除计数：clear counters
注意：若clear counters无法清除计数统计，则clear counters access-list xx（xx代表acl的名字）来清除
这篇关于华为和锐捷设备流统配置的文章就介绍到这儿，希望我们推荐的文章对编程师们有所帮助！
